• 한국재료학회지
• /
• 제15권2호
• /
• pp.134-138
• /
• 2005

This study was performed to investigate the surface properties of electrochemically oxidized pure niobium by anodic oxide and hydrothermal treatment technique. Niobium specimens of $10mm\times10mm\times1.0mm$ in dimension were polished sequentially from $\#600,\;\#800,\;\#1000$ emery paper. The surface of pure niobium sperimens was anodized in an electrolytic solution that was dissolved calcium and phosphate in water. The electrolytic voltage was set in the range of 250 V and the current density was $10mA/cm^2$. The specimen was hydrothermal treated in high-pressure steam at $300^{\circ}C$ for 2 hours using an autoclave. And all specimens were immersed in the in the Hanks' solution nth pH 7.4 at $37^{\circ}C$ for 30 days. The surface of specimen was characterized by surface roughness, scanning electron microscope(SEM), energy dispersion X-ray analysis(EDX), X-ray photoemission spectroscopy(XPS) test. The value of surface roughness was the highest in the anodized sample and $0.41{\pm}0.04\;{\mu}m$. The results of the SEM observation show that oxide layers of the multi porosity in the anodized sample were piled up on another, and hydroxyapatite crystal was precipitate from the surface of the hydrothermal treated sample. In the XPS analysis, O, Nb, C peak and small amounts of N peak were found in the polished specimens while Ca and P peak in addition to O, Nb, C and peak were observed in the hydrothermal treated sample.

• KSBB Journal
• /
• 제11권2호
• /
• pp.140-150
• /
• 1996

가정용 혈중 cholesterol 측정시스템을 개발하고자, 그 성능을 조절할 수 었는 벤수들의 최적화가 수 행되었다. 시스템의 주요 구성성분은 분석에 요구되는 효소들 (cholesterol esterase, cholesterol oxidase, 그리고 horseradish peroxidase) 이 부동화된 nitrocellulose membrane strip과 비 이온세척제 (Tri­t ton X-1OO) 및 발색물질 (3,3'-diaminobenzidine) 이 포함된 시료운반용액이다. 시료와 운반용액이 훈 합된 수용액을 membrane의 하단으로부터 흡수시키 면 모세관현상에 의해 시료는 부통화된 효소층으로 전달되어 연속효소반응이 일어난다. 마지막 효소반 응에서 발색물질은 산화되고 그에 따라 cholesterol 농도에 비례한 특정색이 신호로써 발생된다. 그 신호세기에 대해 효소들의 부동화조건과 운반용액의 화학조성이 최적화되었다. 최적조건 하에서 구성된 측정시스템의 농도응탑곡선은 혈중 cholesterol 농도를 측정하기에 충분히 높은 민감도를 나타내었다.

• 한국염색가공학회지
• /
• 제25권1호
• /
• pp.25-29
• /
• 2013

Poly ketone (PK) was photo-oxidized by UV/ozone irradiation and the effect of UV energy on the surface properties of the UV-irradiated PK film was investigated by the measurement of reflectance, surface roughness, contact angles, ESCA, and ATR. Reflectance, particularly at the wavelength of 380nm, decreased with increasing UV energy. And the irradiation produced nano-scale roughness on the surface uniformly. The maximum surface roughness increased from 25.3nm for the unirradiated sample to 104.9nm at the irradiation of $42.4J/cm^2$. The improvement in hydrophilicity was caused by the introduction of polar groups such as C-O and C=O bonds resulting in higher $O_{1s}/C_{1s}$. The surface energy of PK film increased from $43.3mJ/m^2$ for the unirradiated sample to $71.9mJ/m^2$ at the irradiation of $31.8J/cm^2$. The zeta potential of the UV-irradiated PK decreased with increased UV energy and the dyeability to cationic dyes increased accordingly, resulting from the photochemically introduced anionic and dipolar dyeing sites on the PK films surfaces.

• 한국환경보건학회지
• /
• 제16권2호
• /
• pp.31-39
• /
• 1990

An analytical method for particulate carbon and other elements by using elemental analyzer was investigated. Carbon, hydrogen, and nitrogen was determined as CO$_{2}$, H$_{2}$, and N$_{2}$, respectively. Organic was determined after scparation from elemental carbon(Cae) by volatilization and thermal decomposition in a heated helium flow. With organic materials examined in this reprot, more than 90% of carbon was detected as above 600$^{\circ}$C. But it is considered that a few percents of some compounds were charred above 550$^{\circ}$C. A small amount of Cae was oxidized in the inert atmosphere above 850$^{\circ}$C, but the reason was not explained clearly. Based on the thermal chracteristics of Cao it was found that the optimum temperature of heating in the helium flow of an elemental analyzer for Cao analysis is 630$^{\circ}$C. Carbon in a sample after removing Cao was assumed as Cae and the gramatom ratio of hydrogen to carbon in the sample was 0.4 and less. Rescovery of nitrogen derived from some ammonium salts and nitrates was 100% by two-step measurement with elemental analyzer. By the analytical method investigated in this report, carbon and other elements in suspended particulates(S.P) collected at an urban area in Seoul were measured. There was a good correlation between total nitrogen in SP measured by elemental analyzer and nitrogen estimated form ammonium ions and nitrate ions in SP. The nitrogen from these ions accounts for 80% of the total nitrogen. It is further suggested that the residue(20%) of the total nitrogen is attributed to the other nitrogeneous compounds.

• 대한가정학회지
• /
• 제11권1호
• /
• pp.44-56
• /
• 1973

The effect of the temperature and the time of scalding, and the addition of various seasoning on the remaining % of total Vitamin C contained in Spinach (Spinacia oleracea) was studied and discussed by means of chemical kinetics. The quantitative measurements of total Vitamin C were made by 2,4-dinitrophenyl hydrazine (DNPH) method with Clinical Electrophotometer (Fisher). The sample spinach contains 39.88mg. % of total vitamin C on the average, and the ratio of oxidized and reduced forms of Vitamin C is 1 : 4.7. When the sample spinach was scalded, the kinetics of the decrease of the remaining total vitamin C. % was observed to follow the first order reactions regardless of the temperatures applied (i,e. 70$^{o}$ , 80$^{o}$ , 90$^{o}$ and 100$^{o}$ ) with half-life range of 2.10 - 1.47 minutes. In the case of the addition of various seasonings, the addition of various seasonings, the kinetics remaining Vitamin C % showed to be the zero order reactions regardless of the kinds of seasonings and storage temperatures. With the addition of seasonings, the stability of Vitamin C was found to be increased in the order table salt+sesame oil+vinegar+soybean sauce, without seasoning, table salt+sesame oil, table salt+sesame oil+soybean sauce.

• 한국재료학회지
• /
• 제14권12호
• /
• pp.885-888
• /
• 2004

$BaMgAl_{10}O_{17}:Eu^{2+}$ for PDP blue phosphor was synthesized using SHS(Self-propagating High temperature Synthesis) method. While Al metal powder was oxidized in this combustion, $Eu_{2}O_3$ was reduced to Eu2+. Therefore the mole ratio of $Al/Al_{2}O_3$ is one of the most important variable of the reaction. When $Al/Al_{2}O_3$ is 2.5/3.75, it has not only appropriate temperature and reaction velocity, but also excellent luminescent property. The sample synthesized in this system has similar characteristics comparing to sample using conventional solid-state reaction.

• 대한화학회지
• /
• 제43권4호
• /
• pp.430-437
• /
• 1999

흐름주입 분석법(FIA)에 의한 간접 요오드화 UV 검출법으로 총 잔류염소를 신속하게 정량하는 방법을 연구하였다. FIA장치를 최적화하기 위해 용리액의 pH, 요오드화 이온의 농도, 혼합 및 반응코일의 길이,시료주입량 및 유속, 온도 및 검출파장에 대한 변화를 관찰하였다. pH 8.3에서 하이포아염소산 이온은 요오드화 이온을 선택적으로 산화시키고 자신은 염화이온으로 환원되었다. 방해이온을 제거하기 위한 가리움제로서 에틸렌다이아민이 가장 좋은 효율을 나타내었다. 하이포아염소산 이온의 검정곡선은 0.03-0.3 mg/L의 농도 범위에서 0.999이상의 직선성을 나타내었고, 검출한계는 0.007 mg/L이었다. 이러한 분석조건하에서 몇몇 전주근교 상수중 총 잔류염소의 농도를 정량하였다.

• 유기물자원화
• /
• 제20권4호
• /
• pp.118-126
• /
• 2012

본 연구를 위한 실험 장치는 하루에 100톤 규모의 돼지분뇨를 퇴비화와 액비화 하는 방식으로 처리하는 시설에 설치되었다. 액비조의 경우 폭기되는 분뇨의 상층부에 흡입부를 설치하고 기체를 빨아들이는 방식으로 실험용 기체시료를 포집하였다. 포집된 시료는 오존이 존재하는 2 종류의 반응조에 유입된 후 오존과 접촉하는 방식으로 처리되었다. 처리효율 분석은 처리시설 유입부 배관에서 채취한 시료와 오존과 반응한 후 배출되는 배관에서 채취한 시료의 성분함량을 비교하여 결정하였다. 퇴비사의 시료는 교반 후 발생하는 기체를 흡입한 후 액비조에서와 같은 방식으로 처리하고 그 효율을 분석하였다. 오존접촉에 의한 반응효과는 암모니아보다는 황 화합물에서 더 크게 나타났다. 암모니아의 경우 오존접촉 방법에 관계없이 10% 내외의 감소효과를 보였다. 반면에 황 화합물은 오존 처리에 의해 상당량 감소하는 결과를 나타냈다. 액비화 시설로부터 발생된 시료의 경우, 유입부에서 50.091, 4.9089, 27.8109, 0.4683 ppvs 의 농도를 보였던 $H_2S$, MM, DMS, DMDS가 반응 후 유출부에서는 각각 1.2317, 0.3839, 14.7279 0.3145 ppvs 수준으로 감소하였다. 같은 조건으로 호기적 퇴비화 과정에서 발생한 시료를 처리한 결과 $H_2S$, MM, DMS, DMDS 농도는 40.6682, 1.3675, 24.2458, 0.8289 ppvs에서 3.013, 불검출, 8.8998, 0.3651 ppvs 수준으로 감소하였다. 액비화 시설에서 발생하는 시료에 또 다른 형태의 오존을 적용한 결과 $H_2S$, MM, DMS, DMDS가 43.397, 1.4559, 3.6021, 0.4061 ppvs 농도 수준에서 각각 불검출, 불검출, 불검출, 0.2185 ppvs 수준으로 감소하였다.

• 한국환경보건학회지
• /
• 제15권2호
• /
• pp.33-40
• /
• 1989

Dichromate reflux method for COD analysis is one of the useful and precise way to solve the organic content of the wastewater. But the standard procedure for COD is not entirely satisfactory for sample containing appreciable amounts of inhibiting substance, especially chloride ion. Under the conditions of the established test, a big disadvantage of the method is that dichromate oxidizes chloride quantitatively to chlorine. When it is necessary to use silver sulfate as a catalyst in the COD procedure, chloride must be removed before the addition of the catalyst. Silver sulfate and mecuric sulfate forms a precipitate of AgCl and HgCl$_{2}$ separately which is not completely oxidized during the test and, therefore, cannot be corrected for. So, we evaluate and compensate the amount of chloride oxidation in the absence of chemicals during the experimental procedure. Calculation of COD is made using the following reviced formula: real COD = tested COD - 0.2277Cl.

• 한국분말재료학회지
• /
• 제9권5호
• /
• pp.322-328
• /
• 2002

Fe-Co nanocomposite powders with different composition were prepared by chemical vapor condensation (CVC) process and their characterizations were studied by means of X-ray diffraction, transmission electron microscopy, and vibrating sample magnetometer. The particles having the mean size of 5~25 nm consisted of metallic cores and oxide shells. The Co contents and particle size increased with increasing the carrier gas flow rate of Co precursor. The saturation magnetization and coercivity increased with increasing Co content. and the saturation magnetization maximized at the 40 wt.%Co. The Fe-Co nanocomposite powder oxidized at $400^{\circ}C$ showed the maximum coercivity of 1739 Oe.