• 한국응용과학기술학회지
• /
• 제32권1호
• /
• pp.78-84
• /
• 2015

본 연구는 통상 muntz metal로 불리는 구리와 아연의 합금 금속의 산화 환원 반응을 이용한 폐수 중 탈인 처리에 관한 연구이다. 연구를 위하여 $200{\mu}m$ 두께의 극세사 형태로 제조된 구리 아연 금속합금이 수용액 중에서 산화 환원 반응 작용으로 인하여 발생하는 OH radical을 이용하여 금속과 phosphate의 공침 반응에 의해 탈인 처리되는 원리를 이용한 인 처리법에 관한 연구이다. 인 제거 효율은 장시간의 순환 처리보다는 1회 처리에서 가장 제거 효율이 높았으며, 1시간 이후의 순환처리에서는 더 이상의 제거효율을 보이지 않았다. 이는 금속합금 물질은 표면적이 넓어서 1회 처리만으로도 수용액의 pH를 평형에 도달하게 하여 반응 효율이 높은 것으로 나타났다. 제조한 합성폐수의 pH 조건은 pH 5 에서 pH 9 사이이며, pH 8일 때 제거 효율이 가장 높았으며 pH 8 이상에서는 효율 증가를 보이지 않았다. 이때 인산염은 $H_2PO_4{^-}$, $HPO_4{^{2-}}$의 형태로 가장 많이 존재하는 것으로 조사되었으며, 온도에 따른 인 제거는 온도만의 영향이 아닌 타 영향인자와의 관계를 고려해야 하며 본 연구에서는 온도가 낮을수록 높은 인 제거 효율을 보였다.

• 한국환경농학회지
• /
• 제27권1호
• /
• pp.44-49
• /
• 2008

본 연구는 농촌마을에서 발생하는 마을하수의 수질현황과 마을하수 처리시설에 대한 관리 현황 및 정확한 실태를 파악하고 처리효율을 조사하여 마을하수의 효율적인 관리방안을 모색하며, 농촌마을 하수정비 사업과 농촌지역 하수정책 수립의 활용에 대한 기초자료로서 제공하고자 실시하였는데, 그 결과는 다음과 같다. 1. 마을하수 처리시설에 대한 각 지역별 유입수 수질 분석 결과, 아산시 지역에서의 유입수 BOD와 COD의 평균 농도는 각각 29.0 mg/L와 19.1 mg/L였고, 부여군 지역은 BOD 16.7 mg/L, COD 16.3 mg/L, 공주시 지역은 BOD 18.8 mg/L, COD 15.3 mg/L로 조사되어 아산시 지역에서 유입수의 농도가 가장 높았으나 일반적인 도시하수의 유입수 농도에 비해 매우 낮게 조사되었다. 2. 오염부하량별 원단위는 BOD $3.3{\sim}4.9$ gpcd, COD $3.2{\sim}11.3$ gpcd, T-N $1.5{\sim}4.6$ gpcd, T-P $0.3{\sim}0.5$ gpcd 로 조사되어 도시하수의 오염부하량 원단위 결과보다는 상당히 낮게 조사되었다. 3. 마을하수 처리시설의 처리공법별 제거효율은 고효율 합병정화조와 토양피복형 접촉산화법에서는 특히 BOD와 SS의 제거효율이 높았으며, 접촉산화법의 경우는 다른 처리공법에 비해 조금 낮게 조사되었다.

• 한국대기환경학회지
• /
• 제26권3호
• /
• pp.330-338
• /
• 2010

In this study, removal characteristics of nitrogen oxides $(NO_x)$ from road transport by using peat as the packing media for biodegradation have been investigated in the long term. Physicochemical and biological treatment of peatmixed media eliminates any requirement to use chemical substances and also facilitates the biodegradable actions of microorganism. Safe biodegradation of pollutants, no need to apply additional microbes owing to their active growth, and no generation of secondary pollutants were found in this experiment. It was concluded that average removal efficiencies of nitric oxide (NO) and nitrogen dioxide $(NO_2)$ were 80% and 97% respectively with respect to the linear velocity 35~40 mm/s and 0.3 ppm ozone concentration in the long period operation. Inflow concentration of nitric oxide over 0.05 ppm was suitable when pretreated with ozone. Non-ozone stage was performed with linear velocity 20~100 mm/s and then the average removal efficiency of nitric oxide and nitrogen dioxide were 38% and 94% respectively. Other results showed that the apparent static pressure was raised with increases in applied water content and aerial velocity in mixed media during fan operation.

• 한국물환경학회지
• /
• 제26권2호
• /
• pp.303-310
• /
• 2010

Recently distinguished AOP means technology resolving organic compounds in water to harmless compounds such as $CO_2$ and $H_2O$ by creating OH radical ($OH{\cdot}$) with more powerful oxidation than general oxidants. It has merits which the 2nd pollution is not caused since it uses solar energy, sludge doesn't take place, it can be applied to high-density waste water and it oxidizes non-biodegradable organic compounds more easily. The purpose of the study was to examine about removable characteristics of phenol which was a non-biodegradable organic matter with UV/$O_3$/Catalyst processes which is one out of AOP and to present applicability of photocatalyst and the optimum conditions of treatment. The study regarded initial phenol concentration, initial pH, photocatalyst amount and flow as its conditions. As the results, the test had the highest removable efficiency (92%) when initial phenol concentration was 100 mg/L, initial pH 7, photocatalyst amount 6L and flow 1.5 mg/min. The removable efficiency was increased as much as initial phenol concentration was increased, when initial pH was 7 (neutrality), photocatalyst amount was increased and flow was increased. It was checked that the optimum HRT was 12 hours. Therefore, phenol is enough removable with UV/$O_3$/Catalyst process and its prospect in the future is expected.

• 한국응용과학기술학회지
• /
• 제34권1호
• /
• pp.108-115
• /
• 2017

VOCs는 인체에 치명적인 질환을 유발하는 물질로써 도장공정중 발생되는 양이 가장 큰 비중을 차지하고 있다. 일반적으로 소형 도장시설에서 발생되는 VOCs를 처리하는 방법으로 활성탄 흡착 또는 흡착 후 연소 및 촉매 산화법 등을 사용하고 있다. 하지만 활성탄 교체주기, 재생시설 및 재생주기 등을 예측하기 어려워 새로운 처리방법이 필요하다. 비이송식 플라즈마 시스템을 이용한 VOCs 제거방법은 일반 연소과정이 아닌 고전압 아크 방전에 의한 고온 플라즈마 유동 발생 기술을 이용한 제거방법으로 화학반응이나 오염이 없는 고순도의 고온 열처리 및 열분해가 가능하다. 본 연구에서는 고온 아크플라즈마 시스템을 이용하여 특수 환경오염물 및 VOCs 가스 열처리 공정의 핵심기술로 활용하여 작동가스 유량 변화에 따른 VOCs 처리 효율 및 플라즈마 전력량에 따른 처리 효율을 측정하였다. 또한 유해가스 처리효율성 증대를 위해 플라즈마 반응기를 최적화하여 제작하였으며 성능을 파악하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.157.1-157.1
• /
• 2016

In this work, we experimentally investigated the solar absorption performance of Cu-based scalable nanostructured surfaces and compared their performance with the conventional TiNOX. We fabricated Cu-based nanostructured surfaces with a controlled chemical oxidation process applicable to a large area or complex geometry. We optimized the process parameters including the chemical compounds, dipping time and process temperature. We conducted both lab-scale and outdoor experiments to characterize the conversion efficiency of each absorber surfaces with single and double glazing setup. Lab-scale experiment was conducted with $50mm{\times}50mm$ absorber sample with 1-sun condition (1kW/m2) using a solar simulator (PEC-L01) with measuring the temperature at the absorber plate, cover glass, air gap and ambient. From the lab-scale experiment, we obtained ${\sim}91^{\circ}C$ and $94^{\circ}C$ for CuO and TiNOX surfaces after 1 hr of solar illumination at single glazing, respectively. To measure the absorber performance at actual operating condition, outdoor experiment was also conducted using $110mm{\times}110mm$ absorber sample. We measured the solar flux with thermopile detector (919P-040-50). From outdoor experiment, we observed ${\sim}123^{\circ}C$ and $131^{\circ}C$ for CuO and TiNOX with 0.6 kW/m2 insolation at double glazing, respectively. We showed that the suggested nanostructured CuO solar absorber has near-equivalent collection efficiency compared with the state-of-the-art TiNOX surfaces even with much simpler manufacturing process that does not require an expensive equipment.

• 한국세라믹학회지
• /
• 제53권4호
• /
• pp.400-405
• /
• 2016

Ferric oxide (${\alpha}-Fe_2O_3$, hematite) is an n-type semiconductor; due to its narrow band gap ($E_g=2.1eV$), it is a highly attractive and desirable material for use in solar hydrogenation by water oxidation. However, the actual conversion efficiency achieved with $Fe_2O_3$ is considerably lower than the theoretical values because the considerably short diffusion length (2-4 nm) of holes in $Fe_2O_3$ induces excessive charge recombination and low absorption. This is a significant hurdle that must be overcome in order to obtain high solar-to-hydrogen conversion efficiency. In consideration of this, it is thought that elemental doping, which may make it possible to enhance the charge transfer at the interface, will have a marked effect in terms of improving the photoactivities of ${\alpha}-Fe_2O_3$ photoanodes. Herein, we report on the synthesis by pulsed electrodeposition of ${\alpha}-Fe_2O_3$-based anodes; we also report on the resulting photoelectrochemical (PEC) properties. We attempted Ti-doping to enhance the PEC properties of ${\alpha}-Fe_2O_3$ anodes. It is revealed that the photocurrent density of a bare ${\alpha}-Fe_2O_3$ anode can be dramatically changed by controlling the condition of the electrodeposition and the concentration of $TiCl_3$. Under optimum conditions, a modified ${\alpha}-Fe_2O_3$ anode exhibits a maximum photocurrent density of $0.4mA/cm^2$ at 1.23 V vs. reversible hydrogen electrode (RHE) under 1.5 G simulated sunlight illumination; this photocurrent density value is about 3 times greater than that of unmodified ${\alpha}-Fe_2O_3$ anodes.

• Environmental Engineering Research
• /
• 제23권2호
• /
• pp.210-215
• /
• 2018

Coal seam gas (CSG) water, to be discharged, has been usually treated in reverse osmosis (RO) plants which require extensive and expensive pre-treatment. However, current low gas prices have been a great driver for relevant industries to seek for alternative cost-effective technologies in the aspect of its beneficial use and fit-for-purpose usable water production. In this paper, a combined system with a two-stage pore control fiber (PCF) filtration and a RO system was designed and tested for CSG water treatment. Also, a coagulation reactor was placed in front of the PCF to further enhance suspended solid removal. More than 99% of SS were removed through the PCF filtration while organic, total nitrogen and total phosphorous were mostly removed by the RO system. Especially along with a decrease in conductivity, the total dissolved solid derived from salts was mainly removed in the RO system. Having $OH^-$ undetected, $HCO_3{^-}$ was found to be a dominant compound and its removal efficiency was 97-98% after the RO treatment. And a Fe(III) type of Polytetsu, which was the first to be tested in this paper, was found to be a better option than a Al(III) type of Poly Aluminium Chloride due to its greater coagulation efficiency and applicability at a broader range of pH than the Al(III) type. In addition, there was no noticeable change in oxidation reduction potential, suggesting that an additional process is required to oxidize non-ionic organic carbons (detected as total organic carbon).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.105-110
• /
• 2001

It has recently been raised main issue how solve the problem of insufficient energy. One of the solution is to increase the thermal efficiency of power generation system. For the purpose of high efficiency, it is necessary to increase the steam temperature and pressure. So, the use of modified $9{\sim}12%Cr$ steel having superior creep rupture strength and oxidation resistance is required to endure such severe environment. The evaluation of creep properties of those heat resistance material is very important to secure the reliability of high temperature and pressure structural components. Since creep properties are determined by microstructural change such as carbide precipitation and coarsening, It is certain that there are some relationship between creep properties and hardness affected by microstructure. In this study, SP-Creep ruptured test for newly developed 9Cr steel being used as boiler valve material was performed, and creep properties of the material were evaluated. Also, hardness test were performed and hardness results were related to the creep properties such as LMP and creep strength to verify the availability of SP-Creep test as creep test method.

• 상하수도학회지
• /
• 제14권1호
• /
• pp.54-61
• /
• 2000

Recently, our circumstances are threatened by an accident that leakage of under ground storage tank and illegal dumping of synthetic organic compounds at chemical plants and many treatment methods, Activated carbon adsorption, Ozonization, Membrane filtration and Photocatalystic oxidation, are developed to remove such a synthetic organic compounds. And it has reported that Activated carbon adsorption have a great removal efficiency to nondegradable matters and organic compounds which have a high molecular weight. Comparing with other adsorbents, Activated carbon adsorption have a worse efficiency when ad desorption speed is low. Thus improved type of adsorbents was invented and one of those is Activated Carbon Filter. The purpose of this study was getting information about adsorption characteristic phenol which can be applied Activated Carbon Fiber and Granular Activated Carbon. In detail, With comparing removal characteristics of phenol in the presence Humic Acid using Activated Carbon Fiber(ACF) and Granular Activated. Carbon(GAC), it is to certify an effective application of Activated Carbon Fiber. At the range of this study, Batch test, Isotherm adsorption test and Factorial analysis, following conclusion were obtained from the results of this study. Batch test was carried to know time of adsorption equilibrium. In this study about time of adsorption equilibrium by ACF was faster than GAC's, for developed micropore of ACF. From the result of phenol adsorption test, High removal rate of adsorption is shown at pH 5. The result of lsotherm adsorption test, it has represented that the Freundlich's isotherm is most suitable one in others, that a ACF's adsorption capacity is more excellent than GAC's. Adsorption of phenol exiting humic acid is decreased getting raised humic acid concentration. Since ACF's micropore is developed at this time, an effect of high molecular humic acid is lower. Factorial analysis was carried to know about Main effect which was injection dosage of adsorbent in the range of this study.