• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.127-132
• /
• 2004

본 연구는 2003 년 9월 내습한 태풍 매미로 인해 마산 진해 용원 지역을 포함하는 가덕수도 인근 해역의 태풍 매미의 풍역변화 특성과 개방형 및 폐쇄성 해역 등의 지형적 특성을 고려한 호안 월류 패턴을 고찰하고 이를 모식화하였다. 태풍 매미 통과시 진해만의 경우는 풍향이 E-ESE 인 시점이 파랑에너지가1 충분히 발달하여 입사할 조건에 해당되고 마산만의 경우는 풍향이 SE-S인 시점이며, 부산신항 인근 해역은 S-SSW의 풍향이 유세한 시점을 중심으로 태풍파랑을 산정하여야 구조물에 미치는 정확한 영향을 평가할 수 있을 것으로 판단된다. 따라서 이상 파랑의 내습에 따른 해양구조물의 안정정을 확보하기 위해서는 태풍 통과시 천해역의 풍역변화에 따른 수위변동 및 파랑장 영향을 해석하고 입사파랑에 의한 구조물의 피해를 최소화할 수 있는 방안의 연구 필요성을 강조할 수 있다.

• Journal of Ocean Engineering and Technology
• /
• 제21권1호
• /
• pp.25-30
• /
• 2007

Most of dams and reservoirs were made from natural materials, such as soil, sand and gravel. This type of hydraulic structure has the danger of collapse by overflow during a flood. Freeboard is the vertical distance between the crest of the dam and the full supply level in the reservoir. It must be sufficient to prevent overtopping from over flow. Thus, freeboard determination involves engineering judgment, statistical analysis, and consideration of the damage that would result from the overtopping of a hydraulic structure. This study attempts to calculate the wave height in dam, which is needed for the determination of the freeboard of the dam. Chung-ju dam is selected as the study area. Using the empirical formulas, the wave heights in dam were calculated, and the results were compared with those by the SWAN model, which is a typical wave model. The difference between the calculated results from the empirical formulas and those by the SWAN model is considerably large. This is because empirical equations consider only fetch or fetch and wind velocity, while the SWAN model considers depth and topography data as well.

• Journal of Ocean Engineering and Technology
• /
• 제24권3호
• /
• pp.21-30
• /
• 2010

This study presents a numerical simulation of sea water-exchange as a preliminary accessing tool of water quality in the protected shore behind a overtopped breakwater. The overtopped breakwater is taken into account for a safe swimming and beach protection. The overtopping rate is calculated by empirical models and the consequent currents, known as wave-induced currents, are calculated under the conditions of H.W.O.S.T and L.W.O.S.T. The rate of sea water exchange is used to evaluate the characteristics of sea water exchange and calculated through the simulation processes such as advective discharging through the outlets and random-walking diffusion of particles released within a basin. The numerical results show that the overtopped waves sufficiently improve the water exchange without healthless stagnation of contaminated mass and the consequent currents are not too strong for swimming.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제18권5호
• /
• pp.388-397
• /
• 2012

In this study, 3D-NIT(3-Dimensional Numerical Irregular wave Tank) model in which regular wave as well as stable irregular wave can be generated in 3-dimensional numerical irregular wave tank was proposed. To verify validity, the following steps need to be conducted: 1) comparative analysis between calculated waveforms and targeted waveforms at the wave generating point, 2) comparative analysis with the existing experimental values of overtopping volume estimated, targeting shore protection structures installed on a slope bed, 3) comparison with the existing numerical and hydraulic experimental results through application in the analysis on the wave deformation by structures and wave force acting on the vertical cylindrical structures. Based on the results, characteristics of the breaking wave forces according to incident waves and interval distance of structures were identified through application of 3D-NIT model in the analysis on the breaking wave forces acting on the cylindrical structures installed on a slope bed, and reflection and overtopping was reviewed through application in the special breakwaters on the domestic fields. The numerical results obtained the 3D-NIT model are in good agreement with experimental results, and its applicaion to the complex-shpaed coastal structures is verified.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제19권2호
• /
• pp.113-127
• /
• 2007

In this study, a model to calculate the expected total construction cost is developed that simultaneously considers the rehabilitation cost related to the sliding of the caisson, the economic damage cost due to harbor shutdown in the event of excessive caisson sliding, and the economic damage cost due to temporal operational stoppage by excessive wave overtopping. A discount rate is used to convert the damage costs occurred at different times to the present value. The optimal cross-section of a caisson is defined as the cross-section that requires a minimum expected total construction cost within the allowable limit for the expected sliding distance of the caisson during the lifetime of the breakwater. Two values are used for the allowable limit: 0.3 and 0.1 m. It was found that the economic damage cost due to harbor shutdown by excessive caisson sliding is more critical than the rehabilitation cost of the caisson or the economic damage cost by excessive wave overtopping in the decision of the optimal cross-section. In addition, the optimal cross-section of the caisson was shown to be determined by the allowable limit for the expected sliding distance rather than the minimum expected total construction cost as a larger value is used for the threshold sliding distance of the caisson for harbor shutdown.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제23권6호
• /
• pp.482-488
• /
• 2011

Seadike is a coastal structure constructed in the rear region of the foreshore to maximize its usability by preventing direct effect of wave. The expected construction field is determined under the design wave and tidal condition where minor wave overtopping is anticipated. Thus, the location of seadike is generally fixed at the highest site of the surrounding area with seadike crest height controlling the permissible range of wave overtopping volume. But a lot of times, frontal sand beach of the seadike continuously deforms due to incident waves, resulting failure in maintaining its initial slope. The erosion and deposition of the seadike front cause changes in the crest height and volume of wave overtopping and decrease in the setting depth of the seadike, which endangers seadike region as a result. In this study, the relation of local scouring and setting depth of the seadike front in the run-up region is examined by using 2D hydraulic model tests and numerical simulations by modified SBEACH model. As a result, the study learned that if appropriate boundary condition is applied to the modified SBEACH model, it is possible to create practical estimations on the local scouring at the seadike foot when erosive waves flow into the region.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제32권6호
• /
• pp.575-586
• /
• 2020

In this study, a two-dimensional hydraulic model test was conducted to examine the hydraulic phenomena that occur around the seawall when wave and wind coexist. Based on recent seawall repair and reinforcement examples, the experimental section was constructed under the condition of installing wave dissipation blocks on the safety surface of four different representative seawalls. Water level fluctuation, reflection, overtopping and wave pressure characteristics according to external force change were reviewed. It was confirmed that the top concrete shape of the seawall is the most important factor of the hydraulic characteristics that appear in front of the seawall, and the tendency is more pronounced when wind acts. Even in the case of vertical type seawall, when wind of 3 m/s~5 m/s occurs, the amount of overtopping increases to about 5%~12%. In the case of wave pressure, it was confirmed from the experimental results that the value increased from about 1.5 to 2.2 times in front of the top of concrete block. In addition, it was confirmed that when the shape of the seawall was different, the range of change in the hydraulic characteristics appeared larger. Therefore, when designing a seawall of a new shape, a more detailed review of the hydraulic characteristics should be accompanied based on these experimental results.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.267-272
• /
• 2000

The modeling on uplift pressure on the foundation of a dam on which it was constructed, and on the interface between the dam and foundation is a critical aspect in the analysis of concrete gravity dams. The evaluation of stress intensity factor at the crack tip of concrete gravity dam due to uplift pressure effect by surface integral method is performed in this study. The effects of body force, overtopping pressure and water pressure on the crack-face are also considered in this study.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 한국해안해양공학회 2009년도 발표 논문집 제18권
• /
• pp.180-183
• /
• 2009

월파조건에서 직립벽을 따른 연파특성에 대한 실험을 수행하고 그 결과를 비교하였다. 제체전면을 따른 파고분포를 살펴보면, 상대여유고에 따른 파고변화는 어느 정도 나타났다. 제체 직각 방향으로의 결과에서 상대파고의 감소는 연파의 폭범위내에서 나타나는 것을 확인할 수 있었다. 향후 보다 자세한 분석과 월파량과 연계한 분석을 수행할 예정이다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.743-748
• /
• 1997

In this paper, a new type of precast perforated concrete block is presented to be used in the construction of a step seawall. The overtopping rate of the perforated step seawall is lower than that of the traditional non-perforated step seawall. In construction stage, the cost of total construction of the perforated block is cheaper than that of traditional block. The new type of perforated block may be used as an alternative for shore protection facility.