• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.208-208
• /
• 2006

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.1-10
• /
• 2005

An unstructured parallel overset mesh method has been developed for the simulation of unsteady flows around multiple bodies in relative motion. For this purpose, an efficient and robust search method is proposed for the unstructured grid system. A new data-structure is also proposed to handle the variable number of data on parallel sub-domain boundary. The interpolation boundary is defined for data communication between grid systems. An interpolation method to retain second-order spatial accuracy and to treat the points inside the neighboring solid bodies are also suggested. A single store separating from the Eglin/Pylon configuration is calculated and the result is compared with experimental data for validation. Simulation of unsteady flows around multiple bodies in relative motion is also performed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.222-222
• /
• 2023

오픈 소스 유체역학 소프트웨어인 OpenFOAM은 다양한 유체 흐름에 적용 가능한 프로그램들로 구성되어 있다. 이 중 interFoam은 밀도가 다른 두 유체(i.e., 물, 공기) 간의 경계를 추적하는 기법을 기반으로 한 프로그램으로, 파랑의 거동 모의에 주로 쓰이고 있다. 파생형 프로그램으로는 동격자(dynamic mesh) 및 중첩 격자 기법(overset grid method)을 interFoam에 추가한 overInterDyMFoam이 있다. 두 기법을 사용하면 각각 여러 영역에서 유체흐름과 다중 물체 간의 상호작용을 효율적으로 모의할 수 있다. 본 연구에서는 overInterDyMFoam을 사용하여 두 개 수문의 개방 움직임을 구현하고 생성된 파랑이 포말대(swash zone)에 접근하였을 때의 흐름 특성을 조사하였다. 수치모형실험 결과 수문 개방 속도가 댐 붕괴 파랑 흐름 전파속도에 영향을 미치는 사실을 발견하였다. 또한, 처오름과 처내림의 상호작용에 의한 난류 운동 특성을 조사하기 위해 수문 개방시간 간격을 0초~3초로 설정하였다. 수치모형실험 결과는 수리모형실험의 수면 변동 시계열과 속도 시계열 결과와 비교하여 모형의 정확성이 검증되었다.

• 한국전산유체공학회:학술대회논문집
• /
• 1999.11a
• /
• pp.85-94
• /
• 1999

Transient aerodynamic response of an airfoil to a moving plane-flap is numerically investigated using two-dimensional Euler equations with conservative Chimera grid method. A body moving relative to a stationary grid is treated by an overset grid bounded by a 'dynamic domain-dividing line' the concept of which is developed in this study. A conservative Chimera grid method with a dynamic domain-dividing line technique is applied and validated by solving the flowfield around circular cylinder moving supersonic speed. The unsteady and transient characteristics of the flow solver is also examined by computations of a oscillating airfoil and a ramp pitching airfoil respectively. The transient aerodynamic behavior of an airfoil with a moving plane-flap is analyzed for various flow conditions such as deflecting rate of flap and free stream Mach number.

• Ocean Systems Engineering
• /
• v.7 no.3
• /
• pp.195-223
• /
• 2017

This paper presents 3D numerical simulations of a Free Standing Hybrid Riser under Vortex Induced Vibration, with prescribed motion on the top to replace the motion of the buoyancy can. The model is calculated using a fully implicit discretization scheme. The flow field around the riser is computed by solving the Navier-Stokes equations numerically. The fluid domain is discretized using the overset grid approach. Grid points in near-wall regions of riser are of high resolution, while far field flow is in relatively coarse grid. Fluid-structure interaction is accomplished by communication between fluid solver and riser motion solver. Simulation is based on previous experimental data. Two cases are studied with different current speeds, where the motion of the buoyancy can is approximated to a 'banana' shape. A fully three-dimensional CFD approach for VIV simulation for a top side moving Riser has been presented. This paper also presents a simulation of a riser connected to a platform under harmonic regular waves.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.28-39
• /
• 2018

In this study, numerical simulations were performed for steady and unsteady state characteristics of length effects on linear pintle nozzles using the overset grid method. Nozzles and pintles are created separately by an auto grid generation program to use the overset grid method. Appropriate turbulent models and numerical methods are selected for the validation of simulations. Pintle shapes are chosen from five types, with differences in the ratio of length and diameter. The longer the pintle length, the greater the thrust and thrust coefficient. The chamber pressure tendency of steady-state and unsteady-state are different for various pintle velocities. The thrust of the nozzle exit responds to changes in the nozzle throat in the unsteady-state, and the speed of pressure propagation wave generated by movement of the pintle is considered to predict the major factor of performance.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.8-13
• /
• 2007

Unsteady flow simulation for the tiltrotor Smart UAV configuration was performed to investigate the powered rotor wake effect on aerodynamic characteristics. Calculations were performed to simulate various flow conditions based on different flight modes including hover, conversion and cruise. Three-dimensional compressible Navier-Stokes equation code were used for flow calculation and Chimera grid technique overlapping individually generated grids was employed. A dynamic grid method was adopted in simulation of the rotating blades. Flow calculations were also conducted for the un-powered case. Aerodynamic interaction between the rotor and airframe was investigated comparing three data sets from the un-powered, powered, and isolated rotor cases.

• Journal of computational fluids engineering
• /
• v.13 no.4
• /
• pp.80-85
• /
• 2008

The prediction of the separation trajectories of external stores released from a military aircraft is an important task in the aircraft design area having the objective to define the operational and release envelopes. This paper presents the results obtained for store separation by employing commercial softwares, FLUENT and CFD-FASTRAN. FLUENT treats the rigid body motion by employing a remeshing scheme. CFD-FASTRAN uses Chimera(overset) grid and interpolations. It was found that, for the prediction of the trajectories and behavior of the stores separated from the wing, both codes show the good agreement with the experimental results.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.374-377
• /
• 2008

The prediction of the separation trajectories of the external stores released from a military aircraft is an important task in the aircraft design area having the objective to define the operational and release envelopes. This paper presents the results obtained for store separation by employing commercial sorftwares, FLUENT and CFD-FASTRAN. FLUENT treats the rigid body motion by employing the remeshing scheme. CFD-FASTRAN uses the chimera(overset) grid and interpolations. It was found that, for the prediction of the trajectories and behavior of the stores separated from the wing, both codes shows the good agreement with the experimental results.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.374-377
• /
• 2008

The prediction of the separation trajectories of the external stores released from a military aircraft is an important task in the aircraft design area having the objective to define the operational and release envelopes. This paper presents the results obtained for store separation by employing commercial sorftwares, FLUENT and CFD-FASTRAN. FLUENT treats the rigid body motion by employing the remeshing scheme. CFD-FASTRAN uses the chimera(overset) grid and interpolations. It was found that, for the prediction of the trajectories and behavior of the stores separated from the wing, both codes shows the good agreement with the experimental results.