• 제목/요약/키워드: Overriding Behavior

검색결과 8건 처리시간 0.019초

도시철도차량 타고오름 평가를 위한 3 차원 충돌시뮬레이션 기법 연구 (Study on 3-D Simulation for Overriding Evaluation of Urban Train)

  • 진성주;정현승;권태수;김진성
    • 대한기계학회논문집A
    • /
    • 제39권10호
    • /
    • pp.1063-1068
    • /
    • 2015
  • 본 논문에서는 도시철도차량의 타고오름 평가를 위한 충돌시뮬레이션 기법을 제안하였다. 시뮬레이션모델은 대차의 동적 거동을 표현하는 대차 동역학 모델과 붕괴거동을 표현할 수 있는 차체 유한요소 모델로 구성된다. 유럽 및 국내 충돌안전규정의 타고오름 평가를 위해 40 mm 오프셋 정면충돌 사고 각본에 따른 시뮬레이션을 수행하여 충돌 후 차체의 구조적 거동과 차체와 연계된 대차 모델의 동적 거등을 확인하였으며 타고오름 판단기준인 윤축의 상승거리로 타고오름을 평가하였다. 최종적으로 본 연구에서 제안한 시뮬레이션 기법을 적용하면 도시철도차량 충돌안전규정에 따라 충돌사고 시 타고오름에 대하여 평가할 수 있음을 확인하였다.

열차의 타고오름 해석을 위한 2차원 충돌동역학 모델링 기법 연구 (Study on a 2-Dimensional Dynamic Modeling Technique to Analyze the Overriding Phenomena of Rollingstock)

  • 김거영;구정서;권태수
    • 한국철도학회논문집
    • /
    • 제14권1호
    • /
    • pp.11-18
    • /
    • 2011
  • 본 논문은 열차의 타고오름 해석을 위한 새로운 2차원 다물체 동역학 모델링 방법을 제안하였다. 본 동역학 모델은 에너지 흡수구조/부품뿐만 아니라 차체의 변형도 고려하여 비선형 스프링, 댐퍼, 질량으로 구성되며 철도차량의 충돌에너지흡수량, 승객구간의 가속도, 연결 장치의 충격력, 차량간 타고오름 변위 등을 잘 예측할 수 있다. 제안된 방법으로 한국형고속열차를 차체 각 부분의 압괴 특성을 구하고 2차원 다물체 충돌동역학 모델을 구성하였다. 열차 대 열차 충돌 시나리오조건으로 2차원 동역학 모델을 시뮬레이션하고 3차원 가상시험 모델로 평가하였다. 그 결과 2차원 동역학 모델은 타고오름 거동을 잘 예측하였으며 차체변형을 고려한 모델링 기법이 타고오름 평가에 중요함을 확인하였다.

차체의 압괴특성에 의한 충돌 후 타고오름 거동에 관한 연구 (Study on a Override Behavior during Train Collision by Crush Characteristic of Train Carbody)

  • 김거영;구정서;박민영
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2010년도 춘계학술대회 논문집
    • /
    • pp.604-608
    • /
    • 2010
  • This paper proposed a new 2D multibody dynamic modeling technique to analyze overriding behavior taking place during train collision. This dynamic model is composed of nonlinear spring, damper and mass by considering the deformable characteristics of carbodies as well as energy absorbing structures and components. By solving this dynamic model of rollingstock, collision energy absorption capacity, acceleration of passenger sections, impact forces applied to interconnecting devices, and overriding displacements can be well estimated. For a case study, we choose KHST (Korean High Speed Train), obtained crush characteristic data of each carbody section from 3D finite element analysis, and established a 2D multibody dynamic model. This 2D dynamic model was suggested to describe the collision behavior of 3D Virtual Testing Model.

  • PDF

철도차량 충돌시 선두차량의 타고오름량 예측 연구 (A Study on Prediction of Overriding Behavior Leading Vehicle in Train Collision)

  • 김준우;구정서;김거영;박정필
    • 대한기계학회논문집A
    • /
    • 제40권8호
    • /
    • pp.711-719
    • /
    • 2016
  • 본 연구에서는 철도차량의 대형사고의 주요원인 되는 타고오름 충돌에 대해 이론 모델을 정립하여 선두차량의 타고오름 거동에 대한 이론식을 도출하였다. 이론식을 검증하기 위하여 상용 소프트웨어인 LS-DYNA를 사용하여 이론모델과 동일한 단순 2차원 모델과 실제 동력대차 모델이 적용된 단순 3차원 모델을 만들어 시뮬레이션으로 비교하였다. 타고오름 현상에서 가장 중요한 전두 완충기 수직변위에 대해 시뮬레이션과 이론식을 비교한 결과 최대 편차율은 0.5 [%]과 3.9 [%] 발생하여 이론식이 실제 모델에도 잘 적용될 수 있음을 확인하였다. 또한, 고무 완충기와 유압 버퍼 2가지를 적용한 여러 가지 충돌조건에 대해 이론식을 적용하여 선두 차량 간 타고오름 량을 분석하고, 사고 후 재현 시뮬레이션이나 전두부 충돌완충 설계 시 활용할 수 있는 이론적 방법을 제시하였다.

3D/1D 하이브리드 유한요소 모델을 이용한 동력 분산형 차세대 고속열차 전체차량의 충돌 해석 (Collision Analysis of the Next Generation High-speed EMU Using 3D/1D Hybrid FE Model)

  • 김거영;구정서
    • 한국자동차공학회논문집
    • /
    • 제20권3호
    • /
    • pp.67-76
    • /
    • 2012
  • In this paper, collision analysis of the full rake for the Next Generation High-speed EMU is conducted using a 3D/1D hybrid model, which combines 3-dimensional (3D) front-end structure of finite element model and 1-dimensional (1D) multi-body dynamics model in order to analyze train collision with a standard 3D deformable obstacle. The crush forces, passengers' accelerations and energy absorptions of a full rake train can be easily obtained through a simulation of a 1D dynamics model composed of nonlinear springs, dampers and masses. Also the obtained simulation results are very similar to those of a 3D model if an overriding behavior does not occur during collision. The standard obstacle in TSI regulation has been changed from a rigid body to a deformable body, and therefore 3D collision simulations should be conducted because their simulation results depends on the front-end structure of a train. According to the obstacle collision analysis of this study, the obstacle collides with the driver's upper structure after overriding over the front-end module. The 3D/1D hybrid model is effective to evaluate a main energy-absorbing module that is frequently changed during design process and reduce the need time of the modeling and analysis when compared to a 3D full car body.

3차원에서의 열차 충돌사고 시뮬레이션 연구 (Simulation of Train Crashes in Three Dimensions)

  • 한형석;구정서
    • 한국철도학회논문집
    • /
    • 제5권3호
    • /
    • pp.187-195
    • /
    • 2002
  • It is important to predict the crash behavior of trains to improve their crashworthiness. This paper investigates the simulation of high-speed train crashes in three dimensions using multibody dynamics. At present, little is known about three-dimensional crash simulations. This study shows that it is possible to simulate overriding and lateral buckling, including results from one- or two-dimensional simulations. Several parameters, however, such as computational time and large deformation of structures, need further investigation.

THE CRASH BEHAVIOR ANALYSIS OF TRAIN VIRTUAL TESTING MODEL

  • Kim, Seung-Rok;Goo, Jung-Seo;Kwon, Tae-Soo;Kim, Ki-Hwan
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회A
    • /
    • pp.590-595
    • /
    • 2007
  • It is important to predict the collision behavior of a train consist to improve its crashworthiness. To analyze crash behavior of train, four kinds of methods are mainly used so far. The first is method using multibody dynamics to predict the gross motion of the train set. The second uses 3D FE model to apply the section analysis method in order. The third is used to deduce design specification and evaluate the crashworhiness of a train by using 1D model. The last is to constitute 2D model to check overriding and coupling devices. The train evaluation procedures are so complex that it is difficult to understand or deal with. In this study, VTM for railway train was introduced to simplify the procedures. VTM involves 3D models, 1D models and dynamic components such as suspension and coupling. The method using hybrid concept model makes it possible to do all the things that are mentioned above. To analyze crash behavior tendency of VTM, the model was simulated and the simulation results were discussed.

  • PDF

이중화 구조를 이용한 비동기 디지털 시스템의 방사선 고장 극복 (A New Hardening Technique Against Radiation Faults in Asynchronous Digital Circuits Using Double Modular Redundancy)

  • 곽성우;양정민
    • 제어로봇시스템학회논문지
    • /
    • 제20권6호
    • /
    • pp.625-630
    • /
    • 2014
  • Asynchronous digital circuits working in military and space environments are often subject to the adverse effects of radiation faults. In this paper, we propose a new hardening technique against radiation faults. The considered digital system has the structure of DMR (Double Modular Redundancy), in which two sub-systems conduct the same work simultaneously. Based on the output feedback, the proposed scheme diagnoses occurrences of radiation faults and realizes immediate recovery to the normal behavior by overriding parts of memory bits of the faulty sub-system. As a case study, the proposed control scheme is applied to an asynchronous dual ring counter implemented in VHDL code.