• 마이크로전자및패키징학회지
• /
• 제13권1호통권38호
• /
• pp.31-35
• /
• 2006

본 논문에서는 전력용 반도체 스위칭 소자인 SCR(Silicon Controlled Rectifier)과 적층형 PTC 서미스터의 전기적 특성을 이용하여 각종 전기화재 및 전기사고를 예방 보호하는 제어시스템에 대해 연구된다. PTC(Positive Temperature Coefficient) 서미스터는 온도변화에 따른 저항특성이 정(+)온도계수를 갖는 특징이 있다. 이 PTC는 정온도계수를 갖는 $BaTiO_3$계 세라믹스의 정방정계-입방정계 구조를 가지고 상변이점인 큐리(Curie)온도 이상으로 온도가 증가하면 저항이 급격히 증가하는 현상을 보인다. 본 논문에서는 이러한 정저항 온도특성과 자체 발열특성을 갖는 적층형 PTC 서미스터를 전기단락사고나 과부하사고 등의 전기사고의 감지센서로 이용하여 전기화재사고로부터 보호하는 제어시스템에 대해 제안한다. 또한 제안된 보호제어시스템의 다양한 실험결과를 통해 이론적 해석의 타당성을 입증시킨다.

• 한국화재소방학회논문지
• /
• 제26권3호
• /
• pp.29-34
• /
• 2012

본 논문에서는 소방전원 및 소방전원 부족시 용량 보완을 위한 인터록 시스템의 한계점 등을 분석하고 소방전원 보존형 발전기(RFP)의 작동방법 등을 제시하여 화재와 같은 상황에 효율적으로 대응할 수 있는 방법을 제시하는데 있다. 소방전원보존형 발전기에서 일괄제어방식은 발전기에 과부하가 걸리면 소방전원보존용 제어기에서 신호를 발신하여 소방부하는 남겨두고 비상부하용 주차단기를 일괄 차단하고, 발전기가 마지막까지 소방부하에 전원이 공급되도록 한 시스템이다. 순차제어방식은 과부하가 걸리면 소방전원보존용 제어기에서 1차 신호를 발신하여 설정된 비상부하의 1단계 부하를 차단한다. 그리고 지속적인 감시 상태에서 소방부하가 증가하여 발전기가 다시 과부하가 걸리면 제어기에서 2차 신호가 발신하여 비상부하의 2단계 부하를 차단하는 시스템이며 각각의 작동 상태를 표시하는 표시장치를 가진다.

• 한국군사과학기술학회지
• /
• 제9권4호
• /
• pp.15-23
• /
• 2006

In this paper, full-scale airframe static test of 4-seater canard airplane(the Firefly) was explained. From the results of the structural analysis, 5 design limit loads test conditions and 11 design ultimate loads test conditions were selected. Test loads analysis was performed and test fixtures and load control system(LCS) were prepared to realize the test loads. To protect the test article during the test, the overload protection system was prepared. Strain and deflection values were acquired through the data acquisition system(DAS) to verify the structural analysis results.

• 대한치과의사협회지
• /
• 제53권6호
• /
• pp.418-426
• /
• 2015

The appropriate occlusion is one of the most important factors for the long-term success of implant and its restorations. The purpose of this review is to investigate and define occlusal considerations to reduce failure of implant prostheses. The physiological movement of implants is markedly lower than that of natural teeth and they also lack in occlusal sensitivity. Proper occlusal pattern may be assigned to compensate for the biological disadvantages and occlusal contacts must be formed where the cantilever effect is minimized. Moreover, the long-term success of implants after osseointegration can be assured by reducing early occlusal loading to avoid implant overloading and selecting appropriate occlusion material. Occlusal overload was brought by the number and location of occlusal contacts, which are under the clinician's control. The concept of implant occlusion is based on the concepts derived from traditional prosthetics. Moreover, there are few evidence on the concept or design of implant occlusion. Several occlusal design was recommended for implant prosthesis. Mutually protected occlusion, group function occlusion and bilateral balance occlusion was recommended for the specific types of implant restorations. This article reviews proper design of occlusion for implant restoration and offers occlusion strategy clinically.

• KIEE International Transactions on Power Engineering
• /
• 제2A권3호
• /
• pp.95-101
• /
• 2002

This paper illustrates a new fuzzy effective load model for probabilistic and fuzzy production cost simulation of the load point of the composite power system. A model for reliability evaluation of a transmission system using the fuzzy set theory is proposed for considering the flexibility or ambiguity of capacity limitation and overload of transmission lines, which are subjective matter characteristics. A conventional probabilistic approach was also used to model the uncertainties related to the objective matters for forced outage rates of generators and transmission lines in the new model. The methodology is formulated in order to consider the flexibility or ambiguity of load forecasting as well as capacity limitation and overload of transmission lines. It is expected that the Fuzzy CMELDC (CoMposite power system Effective Load Duration Curve) proposed in this study will provide some solutions to many problems based on nodal and decentralized operation and control of an electric power systems in a competitive environment in the future. The characteristics of this new model are illustrated by some case studies of a very simple test system.

• Animal cells and systems
• /
• 제8권2호
• /
• pp.97-103
• /
• 2004

The cytotoxic effect of iron was examined in peritoneal macrophage to determine contributing factors by iron injection to rat. Viability was reduced by 24% by the iron-overload and by 30% by short-term iron addition. Total iron was increased by 45% in the iron-overloaded with remarkable elevation (9 to 14 fold) in the presence of $FeSO_4$. Free calcium was also increased by 19% in control and 44% in iron-overloaded group due to additional $FeSO_4$ NO and MDA were increased by 40% and 136%, respectively, with significant reduction (37%) of NAD(P)H. RCR and cytochrome c oxidase activity were lowered approximately by 10% with reduction of mitochondrial membrane potential. Addition of iron was frequently associated with altered distribution of mitochondria of high membrane potential in the iron-overloaded macrophage. These results suggest altered mitochondria with high NO and low NAD(P)H due to iron.

• 전기학회논문지
• /
• 제62권6호
• /
• pp.876-880
• /
• 2013

The major causes of electrical fire are classified to short circuit fault, overload fault, electric leakage and electric contact failure. The principal factor of the fire is electric arc or spark accompanied with such electric faults. Earth Leakage Circuit Breaker (ELB) and Molded_case Circuit Breaker (MCCB), that is, Residual Current Protective Devices (RCDs) used on low voltage distribution lines cut off earth leakage and overload, but the RCD can not cut off electric arc or spark to be a major factor of electrical fire. As the RCDs which are applied in low voltage distribution panel are prescribed to rated breaking time about 30[ms] (KS C 4613), the RCDs can't perceive to the periodic electric arc or spark of more short wavelength level. To improve such problems, this paper studies on an arc fault circuit interrupter (AFCI) using the distorted voltage wave in electric arc faults. The proposed voltage sensing type AFCI is an electrical fire prevention apparatus of new conception that operates a circuit breaker with sensing the instantaneous voltage drop of line voltage at electrical faults occurrence. The proposed AFCI is composed of control circuit topology using some semiconductor switching devices. Some experimental tests of the proposed AFCI confirm practicality and the validity of the analytical results.

• Animal cells and systems
• /
• 제14권2호
• /
• pp.91-98
• /
• 2010

Male rats were given a single injection of iron, and temporal changes in iron content and iron-induced effects were examined in heart cellular fractions. Over a period of 72 h, the contents of total and labile iron, reactive oxygen species, and NO in tissue homogenate, nuclear debris, and postmitochondrial fractions were mostly constant, but in mitochondria they continuously increased. An abrupt decrease in membrane potential and NAD(P)H at 12 h was also found in mitochondria. The respiratory control ratio was reduced slowly with a slight recovery at 72 h, suggesting uncoupling by iron.While the ATP content of tissue homogenate decreased steadily until 72 h, it showed a prominent increase in mitochondria at 12 h. Total iron and calcium concentration also progressively increased in mitochondria over 72 h. Enzyme activity of the oxidative phosphorylation system was significantly altered by iron injection: activities of complexes I, III, and IV were reduced considerably, but complex II activity and the ATPase activity of complex V were enhanced. A reversal of activity in complexes I and II at 12 h suggested reverse electron transfer due to iron overload. These results support the argument that mitochondrial activities including oxidative phosphorylation are modulated by excessive iron.

• 한국통신학회논문지
• /
• 제39C권11호
• /
• pp.1146-1150
• /
• 2014

최근 스마트선박 기술 관련 연구에 대한 관심이 증가하고 있다. 또한 스마트선박 기술의 발달로 데이터가 sensor node들에 의해 수집되면서 전송횟수의 증가로 인해 network의 과부하를 야기할 수 있다. 따라서 본 논문에서는 스마트선박 내부의 sensor node에 대한 data 전송횟수에 대한 빈도수를 줄이기 위해 data fusion를 이용하여 data를 가공 처리하는 기법을 적용하였다. 스마트선박 내부에서 수집되는 data는 의미 있는 data 가공하여 센터로 전송되어 network의 부하를 줄이고 효율적으로 data를 전송할 수 있는 방안을 제시하였다.

• 한국인터넷방송통신학회논문지
• /
• 제19권4호
• /
• pp.1-6
• /
• 2019

CCTV 영상 녹화 시스템은 영상 데이터의 증거가치로 인정받음으로 인해, 시설물의 경비 혹은 보안 관제의 목적으로 실생활에 널리 사용되고 있다. 최근 인터넷의 기술의 혁신으로 유/무선 네트워크를 통해 고화질 고용량의 데이터를 실시간 처리할 수 있도록 발전하고 있다. 영상 녹화 장치에서의 녹화 데이터는 중요하지만, 이를 유지하기 위한 방법, 특히 예기지 않은 장비의 결함이나 외부 공격에 의한 영상 데이터 손실을 막기 위한 이중화 방안은 드물다. 어렵게 이중화를 구현한다고 하더라도 고용량의 영상 데이터가 네트워크를 통해 전달되면서 발생하는 네트워크 과부하를 피할 수 없다. 본 논문에서는 CCTV 네트워크 영상 녹화 환경에서 네트워크 과부하를 유발하지 않고 이중화를 운영할 수 있는 장애 조치 기법을 제시하고 검증한다.