• Economic and Environmental Geology
• /
• v.47 no.6
• /
• pp.589-599
• /
• 2014

This study selected optimal sites in Myeongsasimni located in west coast of Korea for stratigraphic research containing extreme climate event during quaternary period by spatio-temporal analyses of changes in sedimentary environment and land use employing 1918 topographic map, 2000 digital terrain map, 1976 and 2012 air photographies. The study area shows no significant changes in topographic characteristics that hilly areas with relatively large variations in elevation are distributed over north and south part of the study area, and sand dues are developed along the coast line. Moreover, flat low lying areas are located at the back side of the sand dues. The movement of surface run off and sediment loads shows two major trends of inland direction flow from back sides of sand dunes and outland direction flow from high terrains inland, and the two flows merge into the stream located in the center of the study area. Two sink with individual area of $0.2km^2$ are observed in Yongjeong-ri and Jaryong-ri which are located in south central part and south part of the study area, respectively. In addition, sea level change simulation reveals that $3.4km^2$ and $3.64km^2$ are inundated with 3 m of sea level rise in 1918 and 2000, respectively, and it would contribute to chase sea level change records preserved in stratigraphy. The inundated areas overlaps well with sink areas where it indicates the low lying areas located in south cental and south part of the study area are identical for sediment accumulation. The areas with minimal human impact on sediment records over last 100 years are $3.51km^2$ distributed over central and south part of the study area with the land use changes of mud and rice field in 1918 to rice field in 2012. The candidate sites of $0.15km^2$ in central part and $0.09km^2$ in south part are identified for preferable locations of geologic record of extreme climate events during quaternary period based on the overlay analysis of optimal sedimentary environment and land use changes.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.99-106
• /
• 2019

Technology that cannot be excluded from 4th industry is self-driving sector. The self-driving sector can be seen as a key set of technologies in the fourth industry, especially in the DB sector is getting more and more popular as a business. The DB, which was previously produced and managed in two dimensions, is now evolving into three dimensions. Among the data obtained by Mobile Mapping System () to produce the HD MAP necessary for self-driving, Point Cloud, which is LiDAR data, is used as a DB because it contains accurate location information. However, at present, it is not widely used as a base data for 3D modeling in addition to HD MAP production. In this study, MMS Point Cloud was used to extract facilities around the road and to overlay the location to expand the usability of Point Cloud. Building utility poles and communication poles DB from Point Cloud and comparing road name address base and location, it is believed that the accuracy of the location of the facility DB extracted from Point Cloud is also higher than the basic road name address of the road, It is necessary to study the expansion of the facility field sufficiently.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.384-390
• /
• 2018

This paper introduces a MATLAB graphical user interface (GUI) based software for analysis of korea augmentation satellite system (KASS) availability performance. This software uses minimum variance (MV) estimator and Kriging algorithm to generate integrity information such as user differential range error (UDRE) and grid ionospheric vertical error (GIVE). The information is offered to ground and aviation users in Korean region. The software also gives accuracy data, protection level data and availability map about each user position by using the integrity information. In particular the software calculates the protection level along a path of aircraft. We verified the result of protection level of aviation user by comparing them with the results of SBASimulator#2, which is a simulation tool of european geostationary navigation overlay service (EGNOS). As a result, the protection level error between the result of our software and the SBASimulator#2 was about 2% which means that the result of our software is accurate.

• Journal of Environmental Impact Assessment
• /
• v.14 no.5
• /
• pp.305-315
• /
• 2005

The scheme to classify pollution sources in Korean TMDL planning has been pointed out too much complex to implement practically because of requiring a wide range of items to be collected from a field. Within a deficient situation to collect field data, the mathematical scheme that focuses only on counting an uniform area ratio of the different land uses to estimate of pollutant loads from individual sub-catchments has been used without taking into account of the spatial characteristics of major land uses as well as the locations of pollution sources in each sub-catchment. It would cause to significant level of errors to estimate the pollution loads. Therefore, this study proposes a renovated scheme that can be adopted more easily to classify pollution sources in the watershed and reduce the estimation errors in the spatial distribution of pollution sources by introducing a spatial analysis based on digital land cover maps. In order to estimate a unit area to calculate the uniform pollution load, the pollution response unit area that is locating spatially at the same place and having same land use is identified through the application of GIS overlay technique. Unlikely existing conventional method to calculate the pollution load based on equal distribution of pollutants for each administrative boundary, it is assumed that the pollution load from household and livestock sources are generated and washed off from only residential areas. While, pollution from business population comes from commercial area and industrial load from wastewater discharge facilities are from industrial areas. From comparison of the calculated results from the existing the method and the proposed one, it is found that although the estimation of pollution load from sub-catchment in the case of the existing conventional method application results in negligible difference in total pollution amounts from the whole area of Wangsook watershed as a study area, significant difference of pollution load among sub-catchment in which pollution response unit areas are diverse, however, appears in the case of the application of the renovated scheme.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.1
• /
• pp.3-12
• /
• 2014

Cadastre is a set of activity registering diverse land information in national scope land management works. A nation examine land information and register it in a cadastral book, and must update data when necessary to properly maintain the information. Currently, local governments execute work about parcels of land alternation by manual work based on KLIS road map. Therefore, it takes too much time-consuming and makes problem as missing lots of parcels of land alternation. This study suggests the method selecting the parcels of land alteration for Jinan-Gun of Jeollabuk-Do using the GIS spatial overlay and the following results are as belows. Firstly, the manual work on the parcels of land alteration was greatly improved through automatically extracting the number and area of parcels according to the land classification and ownership by GIS spatial overlay based on serial cadastral maps and KLIS road lines. Secondly, existing work based on KLIS road lines could be advanced by analyzing the parcels of land alternation using the actual-width of the road from new address system to consider all road area for study site. Lastly, this study can supply efficient information in determining the parcels of land alternation consistant with road condition of local governments by analyzing the number and area of parcels according to the land classification and ownership within various roadsides ranging from 3m, 5m, and 10m by GIS buffering method.

• Economic and Environmental Geology
• /
• v.35 no.2
• /
• pp.163-170
• /
• 2002

The purpose of this study is to analyze the relationship between geology and geothermal gradient in South Korea using GIS. For the analysis, 352 temperature logging wells were constructed to spatial database and the relationships beween geothermal gradient and geological time and lithology were analyzed using the overlay the wells layer and 1:1,000,000 scale geological map layer. The average of the geothermal aradient of South Korea is 29.34$^{\circ}C$/km. In the geologic sequence, Cenozoic strata has 39.7$0^{\circ}C$/km, Mesozoic strata has 30.63$^{\circ}C$/km , Paleozoic strata has 22.32$^{\circ}C$/km, Proterozoic strata 23.15$^{\circ}C$/km geothermal gradient value. In the lithological aspect, plutonic rocks 33.96$^{\circ}C$/km, sedimentary rocks have 24.78$^{\circ}C$/km and sedimentary and volcanic rocks have 26.85$^{\circ}C$/km geotermal gradient value. The result can be used to develop geothermal energy and hot spring as a reference.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.3029-3034
• /
• 2014

The paper describes the scleral diagnostic system implementation for human eyes by using the scleral color code and vessels sign pattern code generations. The system is based on the high performance DSP image signal processor, programmable gain control for preprocessing and RISC SD frames storage. RGB image signals are optimized by PGC, the edge image is detected form the gray image converted. The processing algorithms are executed by scleral color code generation and scleral vessels sign pattern code creation for discriminating and matching. The scleral symptomatic color code is generated by YCbCr values at memory map tolerated and the vessel sign pattern code is created by digitizing the 24 clock and 13 ring zones, overlay matching and tolerances. The experimental results for performance are that the system runs 40ms, and the color and pattern for diagnostic errors are around 20% and 24% on average. The system and technique enable a scleral diagnosis with subdividing the patterns and patient database.

• Spatial Information Research
• /
• v.18 no.2
• /
• pp.35-44
• /
• 2010

This research intended to estimate the damage information from torrential rainfalls using airphotos and spatial data which have been rapidly increasing their applicability recently. The study area was Bonghwagun of Gyungsangbukdo where the large amount of damages were occurred from torrential rainfall in July, 2008. For this study, the database was constructed for the study area by collecting usable data. The interpretable items from the airphotos of 40cm spatial resolution were selected. Also, the useful GIS layers such as road were selected in the digital map to extract the damage information more accurately and rapidly. The damaged area was easily identified through the comparison of pre- and post-disaster airphotos. The recovery cost was estimated by applying unit cost to the damaged area. GIS's overlay function was used to extract the damage information of for individual items damaged. The method for extracting damages information using GIS and airphotos could be more efficient and cost effective in case of relatively wide and unapproachable damaged areas. It is also expected that the method using high resolution imagery would lead to minimize the secondary damages as well since it can facilitate the damage estimation within short period of time thereby supporting early securing budget for recovery.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11C
• /
• pp.929-939
• /
• 2010

The growth of multimedia technology forces the development of video detection for large database management and illegal copy detection. To meet this demand, this paper proposes a fast video detection method to apply to a large database. The fast video detection algorithm uses spatial features using the gray value distribution from frames and temporal features using the temporal similarity map. We form the video signature using the extracted spatial feature and temporal feature, and carry out a stepwise matching method. The performance was evaluated by accuracy, extraction and matching time, and signature size using the original videos and their modified versions such as brightness change, lossy compression, text/logo overlay. We show empirical parameter selection and the experimental results for the simple matching method using only spatial feature and compare the results with existing algorithms. According to the experimental results, the proposed method has good performance in accuracy, processing time, and signature size. Therefore, the proposed fast detection algorithm is suitable for video detection with the large database.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.449-452
• /
• 2008

The building heights of big cities which charged with most space are 3-D information as relative vertical distance from ground control points, but they didn't know the heights using contour with maps as lose of skyline or building heights for downtown, practically continuously developed of many technology methods for implementation of 3-D spatial earth. So, For the view as stereos of variety earth form generated 3-D spatial and made terrain perspective map, 3-D simulated of regional and urban space as aviation images. In this papers, it composited geospatial informations and images by DEM generation, and developed and presented for techniques overlay of CAD data and photos captured at our surroundings uses. Particularly, The airborne LiDAR surveying which are very interesting trend have laser scanning sensor and determine the ground heights through detecting angle and range to the grounds, and then designated 3-D spatial composite and simulation from urban areas. Therefore in this papers are suggested ease selections on the users situation by compare as various simulations that its generation of 3-D spatial image by collective for downtown space and urban sub, and the implementation methods for more accurate, more select for the best images.