• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.285-288
• /
• 2008

In ubiquitous computing environment the biological signal ECG (Electrocardiogram signal) is usually recorded with noise components. Adaptive interference (or noise) canceller do adaptive filtering of the noise reference input to maximally match and subtract out noise or interference from the primary (signal plus noise) input thereby adaptively eliminate unwanted interference from the ECG signal. Measured Stress ECG (or exercise ECG signal) signal have three major noisy component like baseline wander noise, motion artifact noise and EMG (Electro-mayo-cardiogram) noise. These noises are not only distorted signal but also root of incorrect diagnosis while ECG data are analyzed. Motion artifact and EMG noises behave like wide band spectrum signals, and they considerably do overlapping with the ECG spectrum. Here the multidimensional adaptive method used for filtering which is more effective to improve signal to noise ratio.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.693-696
• /
• 2001

Ketoprofen racemate is very useful pharmaceutical intermediate, but the hardness of separation to each enantiomer is most a barrier to apply pharmaceutical industry. To overcome this difficulty, we would like to separate S-ketoprofen from ketoprofen racemate. To design suitable mobile phase, hexane and t-BME(tri-buthyl-methyle-ether) were used to elute peaks of ketoprofen racemate separately. When the ratio of hexane/t-BME/acetic acid was 60/40/0.1(%v/v), each component was separated successfully. In order to separate large amount of S-ketoprofen, sample concentration was increased from 100ppm to 2000ppm. In this case, resolution was decreased due to the overlapping of peaks(1.65${\rightarrow}$0.94).

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.2
• /
• pp.94-103
• /
• 1997

The WCHF-FSJTC (wavelet circular harmonic function frequency selective joint transform correlator) using th wavelet transformed CHF as the reference image in FSJTC is proposed for rotation invariant pattern recognition. Since the wavelet transform has the property of feature extraction, the proposed system can have the better DC (discrimination cpability) and the higher SNR(signal to noise ratio) compared with the conventional CHF-CJTC(circular harmonic function conventional joint transform correlator). And since the structure of the proposed system is FSJTC which can eliminate auto-correlation and cross-correlation between input images, it can eliminate false alarm caused by the overlapping among correlation peaks. The used wavelet functio is the morlet function, which is proper for the reference image used in this paper. the optimal dialation parameter and oscillation frequency of the wavelet function are also achieved with varying the parameters of the wavelet function. The computer simulation shows that the proposed system has the best performance when the dilation parameter is 0.8 and the oscillation frequency is 0.48.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.835-840
• /
• 2002

The purpose of this study is to analyze the reinforcement effect of the RC compressive member confined with carbon fiber sheets and to suggest better transverse confinement coefficient(k$_1$) than one's in the existing analysis equations. Showing amounts of CPS in terms of ratio of transverse reinforcement to cross-section, it comes to be possible to calculate the objective and quantitative reinforcement amounts and to estimate the overlapping length of CFS that can influence on all its confinement effect. The previous parameters were compared using the existing experimental test data, then analyzed for the merits and demerits of existing parameters through the coefficient of correlation(R). The proposed parameters were derived in such a way that established parameters and their combination were obtained from the analytical study and then determined by regression analysis using the previous test data.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.1
• /
• pp.21-29
• /
• 2016

To overcome the large ring gear manufacturing problems seen in slewing bearings and girth gears, pin gear drive units have been developed. Among them, a novel slewing bearing with an internal pinwheel gear set (i-PGS) is introduced in this paper. First, we consider the exact cam pinion profile of i-PGS with the introduction of a profile shift coefficient. Furthermore, a new root relief profile modification for the i-PGS cam pinion is presented. Then, the contact stresses are investigated to determine the characteristics of the surface fatigue by varying the shape design parameters. The results show that the contact stresses of i-PGS can be reduced significantly by increasing the profile shift coefficient. In addition, the contact ratio, a measure of teeth overlapping action, decreases with the decrease of the allowable pressure angle.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.220-223
• /
• 2001

This study was carried out to developed that appraisement model of Potential Productivity Index (PPI). PPI model was used Farmland Productivity Index(FPI) and Labor Productivity Index(LPI) by GIS, and PPI model applied to farm land consolidation region which has been completed recently. FPI was determined by overlapping Poly Grid of the soil properties at the analyzed project region. LPI was estimated by addition productive wages ratio of total direct productive cost. Addition productive wages was determined by GIS Network analysis of working distance between farm house to paddy and each paddy. PPI variation of each the analyzed paddy of Masu and Weoncheon region was $0.967{\sim}0.712,\;0.986{\sim}0.780$ respectively, and could be showed relative largely PPI value. PPI will provide basic element for large scaling and gathering of farm land and a substitute lot of farm land consolidation, and will be maximize productivity of paddy.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.12
• /
• pp.590-596
• /
• 2001

The pre-emphasis is an essential process for speech signal processing. Widely used two methods are the typical method using a fixed value near unity and te optimal method using the autocorrelation ratio of the signal. This study proposes a new pre-emphasis method using the short-term energy difference of speech signal, which can effectively compensate the glottal source characteristics and lip radiation characteristics. Using the proposed pre-emphasis, speech analysis, such as spectrum estimation, formant detection, is performed and the results are compared with those of the conventional two pre-emphasis methods. The speech analysis with 5 single vowels showed that the proposed method enhanced the spectral shapes and gave nearly constant formant frequencies and could escape the overlapping of adjacent two formants. comparison with FFT spectra had verified the above results and showed the accuracy of the proposed method. The computational complexity of the proposed method reduced to about 50% of the optimal method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.66-69
• /
• 2003

This paper presents the procedures for the evaluation of the maximum surface roughness and the shapes of the cut remainder employing the ridge method. The shapes and the heights of the cut remainder are estimated by overlapping adjacent ridges in consideration of the various machining parameters: the feedrate. the path interval. The maximum surface roughness in plane cutting modes are derived as a function of the maximum effective cutter radius, R$\_$eff,max/. and the path interval ratio, $\tau$$\_$fp/, The predicted results are compared with the values estimated by the conventional roughness model.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.561-568
• /
• 1997

Conventional confinement reinforcement for rectangular columns consist of closely spaced perimeter hoops, overlapping hoops, and crossties. One of the potential alternatives to conventional reinforcement is a welded reinforcement grid, prefabricated to required size and volumetric ratio of transverse reinforcement. An experimental investigation was carried out to investigate the strength and deformability of reinforced concrete columns confined with welded reinforcement grids. The comparisons of the envelopes of experimental force-displacement hysteric relationships for columns confined by welded grids with analytically generated force-displacement curves for columns confined with conventional ties. In general, inelastic deformability beyond the peak, as indicate by the slope of the cuvers, was similar to those indicated by columns with conventional ties. The superior performance of columns with welded grids may be attributed to the improved confinement characteristics of grids associated with increased rigidity of welded ties.

• Journal of the Korean Chemical Society
• /
• v.27 no.6
• /
• pp.419-423
• /
• 1983

Amounts of alkylbenzene sulfonate (ABS) in the mixtures of anionic and nonionic detergents were determined by nuclear magnetic resonance (NMR) method. In the NMR spectrum of anionic and nonionic detergents, benzene group showed peaks overlapping at 6.5∼8ppm, but after sampling, benzene group showed two doublet at 7∼8ppm. Calibration curve was obtained by relative ratio of area for benzene group in anionic detergent to that for methyl group in acetic acid(acetic acid was used as the internal standard).