• Journal of Welding and Joining
• /
• v.27 no.6
• /
• pp.74-79
• /
• 2009

Titanium and titanium alloy can be reproduced immediately even if oxide films($TiO_2$) break apart in sea water. Therefore, since titanium demonstrates large specific strength and outstanding resistance to stress corrosion cracking, crevice corrosion, pitting and microbiologically influenced corrosion in sea water environment, it has been widely applied to heat exchanger for ships. In particular, with excellent elongation, pure titanium may be deemed as optimal material for production of heat exchanger plate which is used with wrinkles formed for efficient heat exchange. Conventional plate type heat exchanger prevented leakage of liquid through insertion of gasket between plates and mechanical tightening by bolts and nuts, but in high temperature and high pressure environment, gasket deterioration and leakage occur, so heat exchanger for LPG re-liquefaction device etc do not use gasket but weld heat exchanger plate for use. On the other hand, since welded plate cannot be separated, it is important to obtain high quality reliable welds. In addition, for better workability and production performance, lasers that can obtain weldment with large aspect ratio and demonstrate fast welding speed even in atmospheric condition not in vacuum condition are used in producing products. So far, 1st report and 2nd report compared and analyzed embrittlement degrees by bead colors of weldment through quantitative analysis of oxygen and nitrogen and measurement of hardness as fundamental experiment for the evaluation of titanium laser welding, and evaluated the welding performance and mechanical properties of butt welding. This study welded specimens in various conditions by using laser and GTA welding machine to apply edge welding to heat exchanger, and evaluated the mechanical strength through tensile stress test. As a result of tensile test, laser weldment demonstrated tensile strength 4 times higher than GTA welds, and porosity could be controlled by increasing and decreasing slope of laser power at overlap area.

• The Korean Journal of Franchise Management
• /
• v.12 no.4
• /
• pp.13-23
• /
• 2021

Purpose: This study aimed to derive clues for the franchise industry to overcome difficulties such as various legal regulations and social responsibility demands and to continuously develop by analyzing the research trends related to franchises published in Korea. Research design, data and methodology: As a result of searching for 'franchise' in ScienceON, abstracts were collected from papers published in domestic academic journals from 1994 to June 2021. Keywords were extracted from the abstracts of 1,110 valid papers, and after preprocessing, keyword analysis, TF-IDF analysis, and topic modeling using LDA algorithm, along with trend analysis of the top 20 words in TF-IDF by year group was carried out using the R-package. Results: As a result of keyword analysis, it was found that businesses and brands were the subjects of research related to franchises, and interest in service and satisfaction was considerable, and food and coffee were prominently studied as industries. As a result of TF-IDF calculation, it was found that brand, satisfaction, franchisor, and coffee were ranked at the top. As a result of LDA-based topic modeling, a total of 12 topics including "growth strategy" were derived and visualized with LDAvis. On the other hand, the areas of Topic 1 (growth strategy) and Topic 9 (organizational culture), Topic 4 (consumption experience) and Topic 6 (contribution and loyalty), Topic 7 (brand image) and Topic 10 (commercial area) overlap significantly. Finally, the trend analysis results for the top 20 keywords with high TF-IDF showed that 10 keywords such as quality, brand, food, and trust would be more utilized overall. Conclusions: Through the results of this study, the direction of interest in the franchise industry was confirmed, and it was found that it was necessary to find a clue for continuous growth through research in more diverse fields. And it was also considered an important finding to suggest a technique that can supplement the problems of topic trend analysis. Therefore, the results of this study show that researchers will gain significant insights from the perspectives related to the selection of research topics, and practitioners from the perspectives related to future franchise changes.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.10
• /
• pp.83-94
• /
• 2018

In many theoretical and empirical studies on the design issues of therapeutic healthcare facilities, spatial configuration that promotes users' wayfinding behavior, has been emphasized as a significant factor to mitigate stressful experiences and to enhance restorative quality in the healthcare environment. This is also applicable to the healthcare setting for children. However, not much evidence has been reported with regard to the relationship between spatial configuration and wayfinding behaviors in this specific setting. Moreover, healthcare facilities for children with physical disabilities need more attention to provide easy wayfinding due to various physical restrictions. The aim of this study is therefore, to unfold the relationship between spatial configuration and visual cognitive qualities of outpatient spaces in the selected children's rehabilitation hospitals in Seoul, by examining visual cognitive attributes such as visibility, accessibility, and intelligibility. In the first phase, the spatial layout of the hospitals was analyzed, with an emphasis on the major outpatient areas such as the entrance lobby, doctors' examination, and physical therapy zones. In the second phase, a space syntax tool was implemented to examine visual cognitive characteristics of the spatial configuration. The spatial configuration parameters measured were integration, integration core, visual isovist field continuity, correlation between integration and step depth, and the correlation between integration n and integration 3. As a result, the integration was higher in the hall type configuration. Circulation intersections acted mostly as integration cores for better visibility. Some areas showed the lack of continuity in the visual isovist fields overlap and irregular correlation between integration and step depth. The intelligibility was higher in the circulation area and social interaction spaces such as a cafe, reception waiting, and therapy waiting areas. Based on the analysis, design implication and possible future improvement were discussed to enhance wayfinding experiences in the hospitals for children with physical disabilities.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.2
• /
• pp.132-151
• /
• 2022

Vehicle localization is one of the core technologies for autonomous driving. Image-based localization provides location information efficiently, and various related studies have been conducted. However, the image-based localization methods using feature points or lane information has a limitation that positioning accuracy may be greatly affected by road and driving environments. In this study, we propose a line segment matching framework for accurate vehicle localization. The proposed framework consists of four steps: line segment extraction, merging, overlap area detection, and MSLD-based segment matching. The proposed framework stably performed line segment matching at a sufficient level for vehicle positioning regardless of vehicle speed, driving method, and surrounding environment.

• Journal of Forest and Environmental Science
• /
• v.38 no.4
• /
• pp.229-238
• /
• 2022

Q. mongolica and Q. dentata are representative species of deciduous forest communities in Korea and are known to be relatively resistant to soil drying condition among Korean oaks. This study attempted to elucidate the degree of competition and ecological niche characteristics of the two species by comparing the ecological responses of the two species according to soil moisture. Competition between Q. mongolica and Q. dentata was shown to be more intense under the conditions where moisture content was low than under the conditions where moisture content was high. As for the ecological niche overlaps of the two species for soil moisture, the structural traits of plant such as stem diameter overlapped the most, the traits of biomass such as petiole weight overlapped the least, and photosynthetic organ-related traits such as leaf width and length overlapped intermediately. When looking at the competition for soil moisture between the two species, it can be seen that Q. mongolica won in nine traits (leaf width length, leaf lamina length, leaf lamina weight, leaf petiole weight, leaf area, leaves weight, shoot weight, root weight, and plant weight) and Q. dentata won in the remaining seven traits (leaf petiole length, leaves number, stem length, stem diameter, stem weight, shoot length, and root length). Competition between the two species for the moisture environment of the soil was shown to be intense under the conditions where moisture content was low. The degree of competition between Q. dentata and Q. mongolica for soil moisture is high under the conditions where soil moisture content is low, and it is judged that Q. mongolica is more competitive for soil moisture than Q. dentata.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.25 no.3
• /
• pp.263-275
• /
• 2022

Purpose: The present international survey among healthcare providers aimed to collect data on theoretical knowledge and clinical practices in the diagnosis and management of cow's milk protein allergy (CMPA) and lactose intolerance (LI) in infants. Methods: A global survey was conducted in several countries with diverse health care settings. The survey consisted of multiple-choice questions in 3 main domains: (1) understanding and clinical practices around CMPA and LI; (2) case scenarios; and (3) disease-specific knowledge and potential educational needs. Results: Responses were available from 1,663 participants. About 62% of respondents were general practitioners or general pediatricians, and the remainder were pediatric allergists/gastroenterologists (18%) or other health practitioners (20%). The survey identified knowledge gaps regarding the types of CMPA (IgE-mediated vs. non-IgE-mediated) and the clinical overlap with LI. The survey suggested diverse clinical practices regarding the use of hypoallergenic formulas, as well as misconceptions about the prebiotic benefits of lactose in extensively hydrolyzed formulas in non-breastfed infants with CMPA. Responses to the two case scenarios highlighted varying levels of awareness of the relevant clinical practice guidelines. While respondents generally felt confident in managing infants with CMPA and LI, about 80% expressed an interest for further training in this area. Conclusion: The current survey identified some knowledge gaps and regional differences in the management of infants with CMPA or LI. Local educational activities among general and pediatric healthcare providers may increase the awareness of clinical practice guidelines for the diagnosis and treatment of both conditions and help improve clinical outcomes.

• The Research Journal of the Costume Culture
• /
• v.31 no.1
• /
• pp.70-90
• /
• 2023

This study aims to use Art brut works-the artwork of the socially underprivileged and alienated-to influence social roles in fashion design, employing a formative expression method to promote social acceptance of diversity in the industry. The research method involved investigating Art brut's concept and evolution in domestic and foreign literature and previous studies. The formative characteristics of the movement were derived by analyzing the works of Art brut artist Johann Hauser. One hundred and twenty images of Johann's work were collected through online sources like the Gugging Museum's website, Christian Berst Gallery's website were developed as fashion design using the CLO 3D program. The formative characteristics of Johann's works appeared to be transparent overlapping, divisional decorativeness emphasized simplicity, and vibrant chromaticity. Based on this analysis, the results of the 3D digital fashion designs were as follows. First, the characteristics of the atypical objects and figures in Johann's works were applied to the design silhouette, revealing a uniquely beautiful form. Second, Johann used a method in which numerous line shapes overlap and fill the area. The point of connecting the work is expressed as a graphic pattern by decorating the lines of the hem and hem of the garment with piping or attaching overlapping straps on top of pants and dresses. Third, the combination of overlapping colors used in Johann's work is a color block design of fashion, which utilizes the formative fun.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.177-183
• /
• 2023

Various failure modes occur in the concrete beams reinforced with GFRP(Glass Fiber Reinforced Plastic) under initial condition and repairing patterns. In this study, the failure behaviors of concrete beams restrengthened with GFRP sheet with slightly higher elastic modulus than concrete were investigated. For the tests, concrete beams with 24 MPa were manufactured, and the effects of initial notch, overlapping, end-strip reinforcement, and fiber anchors were analyzed on failure load. The cases of GFRP overlap around notch and the initial notch showed increasing failure loads similar to those of normal restrengthened case since the epoxy of the saturated GFRP sufficiently repaired the notch area. Compared to the control case without restrengthening of GFRP, the concrete with initial notch showed 0.78 of loading ratio and normal restrengthening showed 4.43~5.61 times of increasing ratio of failure loading, where interface-debonding from flexural crack were mainly observed. The most ideal failure behavior, break of GFRP, was observed when end-strip over 1/3 height from bottom and fiber anchor were installed, which showed increasing failure load over 150 % to normal restrengthening.

• Journal of Animal Reproduction and Biotechnology
• /
• v.38 no.3
• /
• pp.158-166
• /
• 2023

Background: Copy number variation (CNV) can be identified using next-generation sequencing and microarray technologies, the research on the analysis of its association with meat traits in livestock breeding has significantly increased in recent years. Hanwoo is an inherent species raised in the Republic of Korea. It is now considered one of the most economically important species and a major food source mainly used for meat (Hanwoo beef). Methods: In this study, CNVs and the relationship between the obtained CNV regions (CNVRs) can be identified in the Hanwoo steer samples (n = 473) using Illumina Hanwoo SNP 50K bead chip and bioinformatic tools, which were used to locate the required data and meat traits were investigated. The PennCNV software was used for the identification of CNVs, followed by the use of the CNV Ruler software for locating the different CNVRs. Furthermore, bioinformatics analysis was performed. Results: We found a total of 2,575 autosomal CNVs (933 losses, 1,642 gains) and 416 CNVRs (289 gains, 111 losses, and 16 mixed), which were established with ranged in size from 2,183 bp to 983,333 bp and 10,004 bp to 381,836 bp, respectively. Upon analyzing the restriction of minor alleles frequency > 0.05 for meat traits association, 6 CNVRs in the carcass weight, 2 CNVRs in the marbling score, 3 CNVRs in the backfat thickness, and 2 CNVRs in the longissimus muscle area were related to the meat traits. In addition, we identified an overlap of 347 CNVRs. Moreover, 3 CNVRs were determined to have a gene that affects meat quality. Conclusions: Our results confirmed the relationship between Hanwoo CNVR and meat traits, and the possibility of overlapping candidate genes, annotations, and quantitative trait loci that results depended on to contribute to the greater understanding of CNVs in Hanwoo and its role in genetic variation among cattle livestock.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.4
• /
• pp.88-94
• /
• 2023

The seating postures of passengers in the automated driving vehicle are possible in atypical forms such as rear-facing and lying down. It is necessary to improve devices such as airbags and seat belts to protect occupants from injury in accidents of the automated driving vehicle, and collision safety evaluation tests must be newly developed. The purpose of this study is to define representative types of head-on collision accidents to develop collision standards for autonomous vehicles that take into account changes in driving behavior and occupants' postures. 150 frontal collision cases remained by filtering (accident videos, images, AIS 2+, passenger car, etc…) and random sampling from approximately 320,000 accidents claimed by a major insurance company over the past 5 years. The most frequent accident type is a head-on collision between a vehicle going straight and a vehicle turning left from the opposite side, accounting for 54.7% of all accidents, and most of these accidents occur in permissive left turns. The next most common frontal collision is the center-lane violation by drowsy driving and careless driving, accounting for 21.3% of the total. For the two types above, data such as vehicle speed, contact point/area, and PDOF at the moment of impact are obtained through accident reconstruction using PC-Crash. As a result, two types of autonomous vehicle crash safety test scenarios are proposed: (1) a frontal oblique collision test based on the accident types between a straight vehicle and a left-turning vehicle, and (2) a small overlap collision test based on the head-on accidents of center-lane violation.