• 한국안전학회지
• /
• 제34권4호
• /
• pp.41-48
• /
• 2019

In October 2018, a large fire occurred after an explosion in an internal floating roof tank (IFRT) that stores gasoline by wind lantern in Goyang city, Gyeonggi-do. Although there was no casualty damage, the fire inside the tank lasted for 17 hours, and caused a great wave socially, and it was a chance to review the safety of the atmospheric storage tank. In this study, the necessity of installing a flame arrester at peripheral vents was examined through the calculation of the size of ventilation pipe and ventilation rate of internal floating roof tanks in terms of the function of the peripheral vent. Next, the necessity of the emergency shut-off valve linked with the high-level alarm to prevent the overflow of the atmospheric storage tank was confirmed by LOPA. Finally, safety measures to prevent overpressure, flame propagation and overflow which cause major accidents in atmospheric storage tank are suggested.

• 제어로봇시스템학회논문지
• /
• 제16권10호
• /
• pp.1013-1017
• /
• 2010

This paper proposes a systematic approach to the rate-based feedback control based on the supervisory control framework for discrete event systems. We design the supervisor to achieve the desired behavior for TCP wireless networks. From the analysis and simulation results, it is shown that the controlled networks guarantee the fair sharing of the available bandwidth and avoid the packet loss caused by the buffer overflow of TCP wireless networks.

• 한국경영과학회지
• /
• 제24권3호
• /
• pp.63-72
• /
• 1999

Recent studies on the Constant Bit Rate and Variable Bit Rate transmissions have mainly focused on the frame by frame encoder rate control based on the quantization parameter. With the existing approaches it is difficult to guarantee a consistent video quality. Also, the rate control overhead is too high for the real-time video sources. In this paper, a channel rate allocation scheme based on the control period is proposed to transmit a real-time video, in which the control period is defined by a pre-specified number of frames or group of pictures. At each control period, video traffic information is collected to determine the channel rate at the next control period. The channel rate is allocated to satisfy various channel rate constraints such that the buffer occupancy at the decoder is maintained at a target level. If the allocated channel rate approaches the level at which the negotiated traffic descriptions may be violated, the encoder rate is decreased through adjusting quantization parameters in the MPEG encoder. In the experimental results, the video quality and the overflow and underflow probabilities at the buffer are compared at different control periods. Experiments show that the video quality and the utilization of network bandwidth resources can be optimized through the suitable selection of the control period.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.591-596
• /
• 1999

In this paper, we present a joint quality control system to be able to accurately control the relative picture quality among the video programs in terms of PSNR. The joint quality control system allows variable bit rate (VBR) for each video program to maintain the pre-determined relative picture quality among the aggregated video programs while keeping a constant sum of the bit rates for all programs to be transmitted over a single constant bit rate (CBR) channel. This is achieved by simultaneous controlling the video encoders to generate VBR video streams at the central controller. Furthermore we also suggest buffer regulation method based on the analysis of the constraints imposed by sender/receiver buffer sizes and total transmission rate. Through various simulation results, it is found that our quality control systems guarantee that the video buffers do not overflow and underflow and the quality control errors do not exceed 0.1 ㏈.

• 디지털산업정보학회논문지
• /
• 제6권2호
• /
• pp.11-17
• /
• 2010

In this paper, we propose efficient rate control algorithm for video near-lossless compression. The proposed method adjusts pixel error range using amounts of previous encoded bits and target bits at a slice encoding interval. Thus, encoded bits by the proposed method are transmitted well through limited bandwidth without overflow. Also, target bits and encoded bits can be controlled according to transmission policy. Experimental results show that our proposed method not only almost fits compression ratio, but also has better image quality.

• 한국수자원학회논문집
• /
• 제54권3호
• /
• pp.181-190
• /
• 2021

본 연구에서는 하천에서의 월류 발생에 따른 제방의 붕괴를 방지하거나 피해를 최소화하기 위한 신소재 보강공법을 제체 표면에 적용하여 그 효과를 검증하기 위한 실규모 횡월류 붕괴 실험을 수행하였다. 본 실험을 위해 제방 모형은 높이 2.5 m, 길이 12 m, 사면경사 1:2로 구성하였다. 또한 제방의 경우 습식 공법을 이용하여 바이오폴리머 분말, 물, 화강풍화토, 황토를 적정 비율로 혼합한 신소재를 제체 표면에 약 5 cm 두께로 분사한 뒤 식생활착 모니터링을 거쳐 최종 실험모형을 완성하였다. 안동하천연구센터 A3 수로 상류에서 4 ㎥/s 의 유량을 유입시켜 횡월류 흐름을 유도하였으며, 음향 도플러 유속계를 이용하여 상·하류의 유량 및 횡월류량의 변동을 측정하였다. 또한, 제방보강공법의 성능을 평가하기 위해 이미지 픽셀 기법 및 3차원 포인트 클라우드 모델링 기법을 활용한 시간에 따른 제방의 표면손실률을 산정함으로써 영상분석 기반의 새로운 평가 도구를 제시하였다. 본 연구결과를 적절하게 활용하게 되면 제방보강공법의 성능을 평가하는데 기초 자료로 활용될 수 있을 것으로 사료된다.

• 한국정보과학회논문지:정보통신
• /
• 제34권4호
• /
• pp.276-286
• /
• 2007

기존의 스트림 전송기법은 네트워크 안정화만을 추구한 나머지 사용자 관점에서 스트리밍 응용 프로그램의 특성을 간과하는 문제점을 가진다. 또한 스트리밍 서비스에 큰 영향을 미치는 미디어의 특성에 대한 고려가 없다는 한계를 가지고 있다. 본 논문에서는 기존 스트리밍 전송기법의 한계를 극복하기 위해서 네트워크 관점의 요구사항과 서비스 사용자의 요구사항을 동시에 고려한 혼합된 형태의 HAViS(Hybrid Approach for Video Streaming) 전송기법을 제안하였다. 제안하는 HAViS 전송기법은 기존 연구와 유사하게 네트워크 상태에 적합하도록 전송률을 조절함으로써 네트워크의 안정성을 향상시킬 뿐만 아니라, 수신단 버퍼의 underflow나 overflow를 효과적으로 예방하여 끊김없는 부드러운 스트리밍 서비스를 제공한다. 또한 서비스되는 미디어 스트림의 특성을 고려하여 설계하였다. 실험 결과를 통해서 제안한 HAViS 전송기법이 버퍼자원 사용의 효율성을 높이며 네트워크 안정성을 향상시키고, 사용자에게 끊김없이 부드러운 스트리밍 서비스를 제공할 수 있음을 확인할 수 있었다.

• 한국양식학회지
• /
• 제18권3호
• /
• pp.189-195
• /
• 2005

By testing the separation performance for a fine settleable solid removal system in an aquaculture system using polystyrene particles as an experimental substitute, the optimal geometric dimensions for a Low-Pressure Hydrocyclone (LPH) were obtained. The design approach far the LPH took into consideration two inflow diameters (Di: 30, 50 mm), three overflow diameters (Do: 60, 70, 100 mm) and four cylinder lengths (Lc: 250, 345, 442, 575 mm), while the cylinder diameter (Dc) at 335 mm, the underflow diameter (Du) at 50 mm and the cone angle (${\theta}$) at $68^{\circ}$ were kept constant. The separation performances of 19 different dimension combinations of LPH were tested, ranging from 300 to 1200 ml/sec of inflow rate using substitute polystyrene particles (0.4-0.7 mm dia., ${\rho}_s=1.05g/cm^3$). These polystyrene particles exhibit a similar density and settling velocity to the fine fecal debris of the common carp. The total separation efficiency for the inflow rate ranged from a high of 97% to a low of 20%. Experimental results obtained by ANCOVA and the Tukey test (${\alpha}=0.05$) showed that the separation performances of the LPH were significantly affected (P<0.05) by the fi, Di, Do and Lc. The maximum separation performance was detected at a dimension combination of 30 mm of inflow diameter (Di), 60 mm of overflow diameter (Do), 442 and 575 mm of cylinder length (Lc). The dimension proportions were 0.09, 1.32-1.72, 0.18 and 0.15 for Di/Dc, Lc/Dc, Do/Dc and Du/Dc respectively.

• 자원리싸이클링
• /
• 제14권2호
• /
• pp.3-9
• /
• 2005

폐자동차 ASR으로부터 염소성분을 제거하기 위하여 풍력선별 및 비중선별 실험을 수행하였다. 또한, ASR플라스틱만을 분리하여 물을 매체로 한 비중선별을 실시하였다. ASR 시료는 모두 8 mm이하로 재분쇄하여 선별실험에 사용하였으며, 플라스틱은 3가지 입도로 나누어 비중선별 실험을 하였다. 풍력선별은 공기유량 9~20 M$^3$/hr 범위의 1단계와 공기유량 25~34 M$^3$/hr 범위의 2단계로 나누어 실시하고 각 산물의 비율과 재질분포를 조사하였다. 1단계 풍력선별후 underflow 산물의 비율은 62~66%인 것으로 나타났으며, 공기유량이 큰 2단계 풍력선별에서는 overflow 산물의 비율이 크게 증가하였다. 폐플라스틱만을 대상으로 한 비중선별 실험결과 부유물질이 침강물질에 비해 다소 많게 나타났으며, 염소함량에 있어서는 최대 수백개의 염소함량 차이를 보여 순수 플라스틱의 경우 매우 우수한 염소함유 재질의 분리효과를 얻을 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권9호
• /
• pp.3159-3176
• /
• 2014

This work presents an analysis of the buffer features of an access router, especially the size, the impact on delay and the packet loss rate. In particular, we study how these features can affect the Quality of Service (QoS) of multimedia applications when generating traffic bursts in local networks. First, we show how in a typical SME (Small and Medium Enterprise) network in which several multimedia flows (VoIP, videoconferencing and video surveillance) share access, the upgrade of the bandwidth of the internal network may cause the appearance of a significant amount of packet loss caused by buffer overflow. Secondly, the study shows that the bursty nature of the traffic in some applications traffic (video surveillance) may impair their QoS and that of other services (VoIP and videoconferencing), especially when a certain number of bursts overlap. Various tests have been developed with the aim of characterizing the problems that may appear when network capacity is increased in these scenarios. In some cases, especially when applications generating bursty traffic are present, increasing the network speed may lead to a deterioration in the quality. It has been found that the cause of this quality degradation is buffer overflow, which depends on the bandwidth relationship between the access and the internal networks. Besides, it has been necessary to describe the packet loss distribution by means of a histogram since, although most of the communications present good QoS results, a few of them have worse outcomes. Finally, in order to complete the study we present the MOS results for VoIP calculated from the delay and packet loss rate.