• Journal of Korean Neurosurgical Society
• /
• v.53 no.4
• /
• pp.218-222
• /
• 2013

Objective : To clarify the anatomical correlations of the sphenoid sinus with surrounding structures in the normal Korean population, and to identify surgical landmarks for safe sellar floor dissection in the anterior skull base by endoscopy and microscopy. Methods : We reviewed the 196 brain magnetic resonance imaging findings showing a normal appearance, and measured the distances between anatomical landmarks. Results : The mean distances from the base of the columella to the anterior wall of the sphenoid sinus and the sellar floor were $69.71{\pm}4.25$ mm and $86.26{\pm}4.57$ mm, respectively in the over 15 age group, and showed the smallest degree of variation among the measurements. The mean angles between the floor of the nasal cavity and the straight line connecting the base of the columella and the sellar floor were $29.45{\pm}3.25^{\circ}$ and $24.75{\pm}4.00^{\circ}$ in the over 15 and under 15 age groups, respectively. The mean values of both distances and angles increased with age until 15 years after which no further increases were evident. There were no significant differences in the measurements between males and females or among subjects with different degrees of pneumatization in the over 15 age group. Conclusion : The distances from the base of the columella to the sellar floor and the anterior wall of the sphenoid sinus, which were consistent among individuals, could be used as a surgical indicator to investigate the sellar floor in endoscopic or microscopic transsphenoidal approaches.

• Korean Journal of Head & Neck Oncology
• /
• v.35 no.2
• /
• pp.27-30
• /
• 2019

Parathyroid adenoma can cause extracapsular bleeding. In 1934, Capps first reported a case of massive hemorrhage secondary to rupture of a parathyroid adenoma. Recently, we experienced a 73-year-old female presented with pharyngeal discomfort and extensive ecchymosis over the neck without history of trauma. Endoscopic investigation revealed submucosal hemorrhage in the posterior wall of the hypopharynx. CT scan and ultrasonography demonstrated the presence of a mass below the left thyroid lobe. Serum calcium level was normal and PTH level was elevated. We underwent left thyroidectomy and parathyroidectomy 2 weeks later from first visit. During the operation, hypopharyngeal mucosa was teared and it was treated with pharyngostoma formation and L-tube feeding. We report a rare case of normocalcemic parathyroid adenoma with spontaneous hemorrhage and propose the proper management period with a literature review.

• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.103-110
• /
• 2018

This study was conducted to investigate the optimum irrigation method for propagation of cutting strawberry ($Fragaria{\times}ananassa$ Duch. cv. Maehyang) plantlet in summer season. The cutting strawberry plantlets were planted in 24-cell tray ($60{\times}34{\times}10cm$) filled with commercial mixed medium (Tosilee) and placed in semi closed-type small plastic tunnel. Each semi closed-type small plastic tunnel was treated as follows; control (non-treatment), over head irrigation (twice a day), capillary mats irrigation (twice a day), or fog irrigation (30 minutes turn on and 10 minutes off from 8:00 to 18:00). The strawberry plantlets were rooted during 8 days in the semi closed-type small plastic tunnel, and then plastic film was removed. Growth parameters, such as plant height, root length, number of primary roots, petiole length, leaf length, leaf width, crown diameter, SPAD, leaf area, fresh and dry weights of the shoot and root, were measured at 61 days after cutting. Relative humidity in tunnel was high in the order by fog irrigation, over head irrigation, capillary mats, and the control as 72.5, 56.3, 45.8, and 29% on average, respectively. However, the air temperature was similar in all treatments. On the 4 and 8 days, the rooting rate of strawberry plantlet was significantly higher in the over head irrigation and fog irrigation treatments. Plant height, petiole length, crown diameter, and leaf area were highest in the over head irrigation and fog irrigation treatments. In addition, fresh and dry weights of shoot were greater in over head irrigation and fog irrigation treatments than the others. Dry weight of root was differed significantly heaviest in the fog irrigation treatment. However, root length, no. of primary roots, SPAD value, and fresh weight of root were not significantly different in all treatments. These results indicated that growth and rooting for propagation of cutting strawberry plantlet 'Maehyang' were best achievement in the over head irrigation and fog irrigation treatments.

• Journal of Yeungnam Medical Science
• /
• v.35 no.2
• /
• pp.205-212
• /
• 2018

Background: Brain volume is associated with dementia and depression in the elderly. An easy way to predict relative brain volume is to measure head circumference. In this study, we investigated the relationship between head circumference and cognition as well as depression in a non-demented elderly community. Methods: Baseline and follow-up surveys were conducted in 2007 and 2010. At baseline, community residents aged 65 years or over (n=382) within a rural area of South Korea were screened for dementia and symptoms of depression and were followed using the same screening battery after 3 years (n=279). Data from anthropometric measurements (head circumference, height, and body weight), demographics, and blood tests were gathered. Neuropsychological tests, including the Korean version of mini-mental state examination (K-MMSE), clinical dementia rating (CDR) including the CDR-sum of boxes, the Korean version of instrumental activities of daily living, and geriatric depression scale (GDS), were performed. None of the 279 subjects followed were demented. Results: Baseline performance on the K-MMSE and GDS was poorer for participants with smaller head circumferences. Follow-up performance on the MMSE was also poorer for participants with smaller head circumferences. Interestingly, participants with smaller head circumference showed worse GDS scores at baseline but on follow-up examination, participants with larger head circumference showed rapid worsening than those with smaller head circumference with marginal significance by ANOVA test. In regression coefficient analysis, GDS decline showed significant difference. Conclusion: Head circumference was not associated with cognitive change but was associated with symptoms of depression in non-demented community residents.

• The Korean Society of Law and Medicine
• /
• v.11 no.1
• /
• pp.199-239
• /
• 2010

In 2008, the Korean Supreme Court came across a plaintiff's claim to return his deceased father who had left family more than four decades ago and lived with another spouse(de facto) in the meantime to be buried after death in a cemetery of his own choice. The major opinion decided to approve the claim, on the ground that the first legitimate son should be the "head worshiper" prescribed in the article 1008-3 of the Korean Civil Code and that the corpse belong to the head woshiper, i. e. the head woshiper has a special "limited ownership" over the corpse for the purpose of its burial and worship, adding that a deceased's disposition inter vivos, if any, be only ethically but by no means legally binding others, including the head worshiper of course. Here scrutinized are the historical developments starting from the Roman criminal law of sepulchri violatio(trespass to grave) through the Canon law of the Middle Age and the doctrinal reactions to the challenges of anatomy and surgery to the formation of the "supporting the deceased" theory in Germany as well as the similarities in other european continental countries(Switzerland, Austria and France). The comparative review shows that the right of remaining family could neither be identified as limited "ownership" nor that the controversy over a corpse be solved by exclusively attributing/distributing it to one/some of the descendants. In principle, the question should be approached in the extension of family support.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.1
• /
• pp.67-72
• /
• 2005

This study proposes a design methodology to determine the optimum configurations of the optical flying head (OFH) for near-field recording systems. Since the OFH requires stricter static and dynamic characteristics of slider air-bearings within an optical tilt tolerance over the entire recording band, an optimum design to keep the focusing and tracking ability stable is essential. The desired flying characteristics considered in this study are to minimize the variation in flying height between the SIL and the disk from a target value, satisfying the restriction of the minimum flying height, to keep the pitch and roll angles within an optical tilt tolerance, and to ensure a higher air-bearing stiffness. Simulation results demonstrate the effectiveness of the proposed design methodology by showing that the static and dynamic flying characteristics of the optimally designed OFH are enhanced in comparison with those of the initial. The gap between the SIL and the disk can be kept at less than 100 nm even if the optical tilt tolerance of the SIL is considered.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.985-990
• /
• 1995

Recently, the development of high speed and high precision NC-lathe for piston head machining is needed for the complexity and diversity of the piston head shape used in automobile reciprocating engine. THe piston head has many complex shapes in the aspect of fuel economy, such as ovality, profile, double ovality and recess. Among them, for the maching of the over shape of 0.1~1mm the cutting tool should move periodically symchronized with the rotation of piston workpiece. The cutting tool feeed system must have high positioning accuracy for the precise machining, high speed for the fast maching and high dynamic stiffness for the cutting force. The linear brushless DC motor is used for satisfying these coditions. The ballbush guide and supporting guide using turcite is used for the guidance of the feed drive system. Linear encoder, digital servo ampllifer and controller are used for driving the motor. THis paper presents the design and simulation of the new tool feed system for noncircular machining.

• Archives of Reconstructive Microsurgery
• /
• v.17 no.1
• /
• pp.42-47
• /
• 2008

Introduction: To evaluate the efficacy of superior gluteal artery-pedicled iliac crest for the treatment of avascular necrosis of femoral head. Material & Method: From January 2001 to October 2001, we used the superior deep branches of superior gluteal artery for the pedicled posterior iliac crest bone graft to revascularize the avascular femoral head in 4 patients. They were 1 man and 3 women, and the mean age of the patients was 34 years (range, 27 to 60). The average follow-up after surgery was over 57 months (range, 15 to 82). We analyzed the clinical results by the Harris hip score, and evaluated the vascularity of the femoral head by radiographic methods. Results: All cases showed no evidence of collapse on femoral heads and good revascularizations on the radiographic images. The average Harris hip score was 88.5 points. There was no complication. Conclusion: The revascularization procedure using the superior gluteal artery-pedicled posterior iliac crest was thought to be one of the effective and promising techniques for the treatment of the avascular necrosis of femoral head.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.196-202
• /
• 2012

An industrial safety helmet primarily intended to protect the wearer's head. It is to prevent or reduce the danger due to flying or dropping objects, falling and prevent the danger due to an electric shock given to the head. However, thermal discomfort of the head is one of the main complaints in the case of wearing safety helmet. Ventilation holes are not allowed in safety helmets on domestic regulations except for industrial safety helmets which are to protect wearer's head against flying or dropping objects. This paper is to produce the need for enlargement of allowing on ventilation holes' regulation to class B. This study reviewed foreign standards' regulations on ventilation holes of safety helmets. Some standards recommend that ventilation may be improved when fresh air is able to enter the helmet around its lower edge and to exit via holes in the helmet located in the upper one third of the helmet. And in the experiments, relationships of ventilation holes and the temperature over the head are analyzed. The experimental results show that the cooling effect of ventilation holes in the upper one third of the helmet is meaningful.

• ETRI Journal
• /
• v.43 no.6
• /
• pp.1038-1048
• /
• 2021

We propose an end-to-end neural coreference resolution for the Korean language that uses an attention mechanism to point to the same entity. Because Korean is a head-final language, we focused on a method that uses a pointer network based on the head. The key idea is to consider all nouns in the document as candidates based on the head-final characteristics of the Korean language and learn distributions over the referenced entity positions for each noun. Given the recent success of applications using bidirectional encoder representation from transformer (BERT) in natural language-processing tasks, we employed BERT in the proposed model to create word representations based on contextual information. The experimental results indicated that the proposed model achieved state-of-the-art performance in Korean language coreference resolution.