• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.4
• /
• pp.177-181
• /
• 1975

The pot experiment was conducted primarily to clarify the relationship between lime application and they amount of potassium for the basal and top dressings on paddy rice. (Orizae sativa L. cultivar; variety Jinheung) The soils mixed with lime and without lime were separately filled in to 0.2827 a. open-bottom concretepots. The soil with lime was treated with slaked lime, at two weeks before transplanting to correct soil pH. around 7.0. The total amount of potassium 12 kilograms per 10a was applied by two or three split doses during transplanting, 19 days after transplanting and primodial stages. The results of experiment obtained are summarized as follows: 1. The application of potash in the rate of 4kg per 10a or less for basal dressing and the remaining amount of potash for top dressing at 19 days after transplanting and primodial stage or one top dressing, at primodial stage have increased the yield of paddy with increased number of panicles per hill, milliequivalent ratio of $K^-/Ca^{++}+Mg^{++}$ in leaves in the later stage of growth, number of ripened grains per panicle, and rate of grain maturity. 2. On the other hand, the greater the amount of potassium given for the basal dressing (over 4kilograms per 10a), the smaller number of tillers and panicles were resulted. And the tendency was considered chiefly due to high salt concentration at the early stage of rice growth.

• Journal of Service Research and Studies
• /
• v.14 no.2
• /
• pp.18-36
• /
• 2024

As interest in ESG has been increased, it is easy to find papers that empirically study that a company's ESG activities have a positive impact on the company's performance. However, research on what ESG activities companies should actually engage in is relatively lacking. Accordingly, this study systematically classifies ESG activities of companies and seeks to provide insight to companies seeking to plan new ESG activities. This study analyzes how Chinese manufacturing companies perform ESG activities based on their dynamic capabilities in the global economy and how they differ in their activities. This study used the ESG annual reports of 151 Chinese manufacturing listed companies on the Shanghai & Shenzhen Stock Exchange and ESG indicators of China Securities Index Company (CSI) as data. This study focused on the following three research questions. The first is to determine whether there are any differences in ESG activities between companies with high ESG scores (TOP-25) and companies with low ESG scores (BOT-25), and the second is to determine whether there are any changes in ESG activities over a 10-year period (2010-2019), focusing only on companies with high ESG scores. The results showed that there was a significant difference in ESG activities between high and low ESG scorers, while tracking the year-to-year change in activities of the top-25 companies did not show any difference in ESG activities. In the third study, social network analysis was conducted on the keywords of E/S/G. Through the co-concurrence matrix technique, we visualized the ESG activities of companies in a four-quadrant graph and set the direction for ESG activities based on this.

• Clinics in Shoulder and Elbow
• /
• v.13 no.2
• /
• pp.293-298
• /
• 2010

Purpose: Since an injured elbow joint can disturb the activity of daily life by limiting motion, especially if the motion is restricted over 40 degree of flexion contracture and under 105 degree of further flexion, it is imperative to select the best method and the timing of treatment of the elbow stiffness. Therefore this review will discuss open surgical techniques for stiff elbows based on the literature. Materials and Methods: It is important to take sufficient clinical examination of the patient, including history taking. And, a surgeon should select appropriate procedure after accurately understanding about the status and cause of the stiff elbow with radiographic methods. Surgical methods include arthroscopic release open release, distraction arthroplasty, total elbow replacement and there are four approachs in the open release - anterior approach, medial "over the top" approach, limited lateral approach: column procedure, posterior extensile approach-. Results and Conclusion: Although at present the arthroscopic technique is emphasized for the treatment of elbow stiffness, a surgeon should know conventional open techniques.

• Journal of Environmental Science International
• /
• v.14 no.1
• /
• pp.41-51
• /
• 2005

Using three-dimensional non-hydrostatical numerical model with one way double nesting technique, atmo­spheric circulation in the mountainous coastal region in summer was investigated from August 13 through 15, 1995. During the day, synoptic westerly wind blows over Mt. Mishrung in the west of a coastal city, Sokcho toward the East Sea, while simultaneously, easterly upslope wind combined with both valley wind from plain (coast) toward mountain and sea-breeze from sea toward inland coast blows toward the top of the mountain. Two different directional wind systems confront each other in the mid of eastern slope of the mountain and the upslope wind goes up to the height over 2 km, becoming an easterly return flow in the upper level over the sea and making sea-breeze front with two kinds of sea-breeze circulations of a small one in the coast and a large one in the open sea. Convective boundary layer is developed with a thickness of about 1km over the ground in the upwind side of the mountain in the west and a thickness of thermal internal boundary layer from the coast along the eastern slope of the mountain is only confined to less than 200 m. On the other hand, after sunset, no prohibition of upslope wind generated during the day and downward wind combined with mountain wind from mountain towardplain and land-breeze from land toward under nocturnal radiative cooling of the ground surfaces should intensify westerly downslope wind, resulting in the formation of wind storm. As the wind storm moving down along the eastern slop causes the development of internal gravity waves with hydraulic jump motion in the coast, bounding up toward the upper level of the coastal sea, atmospheric circulation with both onshore and offshore winds like sea-breeze circulation forms in the coastal sea within 70 km until midnight and after that, westerly wind prevails in the coast and open seas.

• Journal of Korean society of Dental Hygiene
• /
• v.21 no.6
• /
• pp.703-710
• /
• 2021

Objectives: The purpose of this study was to confirm the influence of commercially available carbonated water on denture resin by confirming the changes in the denture surface and adhesion of bacteria. Methods: Carbonated water available in the domestic market was used on specimens made of prosthetic resins. The top four products with respect to sales performance was deposited for 30 min, 24 h, and 48 h over the study groups and over one control group. The surface roughness was measured. Candida albicans was inoculated and cultured over these dentures at 37℃ on the study groups of 1 h, 24 h, and 48 h, and the number of colonies formed was measured. Results: As a result of comparing the surface roughness between groups by immersion time, the difference between groups was confirmed at 48 hours. The Trevi group showed a larger Rz than the Samdasoo group. As a result of comparing the surface roughness by time in each group, statistical significance was shown in the Ra value of the Seagram and the Rz value of the Chojung sparkling water (p<0.05). The Ra value of the Seagram was higher for 48 h than for 30 min, and the Rz value of the Chojung sparkling water was higher at 48 h than at 30 min (p<0.05). Candida albicans concentration increased over the course of immersion. Conclusions: It was confirmed that longer the specimen of the denture resin was immersed in carbonated water, more the surface roughness was affected and higher the number of attached bacteria.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1996.11a
• /
• pp.39-49
• /
• 1996

Hundreds of contaminated sites have been generated due to the past mismagement of toxic substances, the lack of adequate environmental controls and ignorance of the potential environmental impacts of general activities in Canada. The general public, industry and governments have been addressing the contaminated sites with a number of cleanup responses. Environmental protection and remediation have become top priorities for the public and private sectors alike in Canada. Between the late 1980s and the early 1990s, the Canadian Environmental Protection Act and Canada's Green Plan were followed by provincial and territorial laws and policies to regulate contaminated sites. The National Contaminated Site Remediation Program(NCSRP) was initiated in 1989. It has been administered through bilateral agreements between the federal and participating provincial/territorial governments. They have committed a total of $250 million toward orphan site cleanup and technology development/demonstration over a five year period. The federal government has committed an additional $25 million to assess contaminated sites on federal crown land. Over 40 orphan high-risk contaminated sites, over 230 federal sites and over 35 technology development/demonstration projects have been addressed. The Canadian Council of Ministers of the Environment has developed a series of guidance documents to ensure a consistent and successful implementation of the Program. The management/regulation scheme of contaminated sites generally consists of： 1) identifying and investigating sites, 2) determining site contamination, 3) recognizing responsibility and liability, 4) assessing priority for remediation, 5) activation, evaluation and implementing remediation options, and 6) documenting remediation completion. The NCSRP supported the successful development/demonstration of a wide range of innovative remedial technologies. They are related to stabilization/solidification, thermal washing/flushing, advanced oxidation, sonics, and groundwater contaminated with hydrocarbons, PAHS, PCBs, heavy metals, and other hazardous pollutants in a variety of site environments.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.6
• /
• pp.570-574
• /
• 2005

Keratoacanthoma is a benign, self-limited epithelial lesion that closely resembles Squamous cell carcinoma(SCC). Keratoacanthoma occur primarily exposed skin in male patients over 45 years of ages. although etiology is unknown, sunlight, genetic, and human papillomavirus factor have been considered. in clinical feature, rapid enlargement occurs over 4$\sim$8 weeks, resulting ultimately in a hemispheric, firm, elevated, asymptomatic nodule that contains a central plug of keratin. When fully developed, the keratoacanthoma contains a core of keratin surrounded by a concentric collar of raised skin. Over the next 4$\sim$8 weeks, static lesion persists. Then undergoes spontaneous regression over the next 6$\sim$8weeks period by expulsion of the keratin core with resorption of the mass. In histologic feature, Keratoacanthoma consists of hyperplastic squamous epithelium growing into the underlying connective tissue. The surface is covered by a thickened layer of parakeratin with central plugging. Epithelium cell shows dysplastic features and the margins the normal adjacent epithelium is elevated. The differential diagnosis includes SCC. Keratoacanthoma present as a exophytic lesion with horny keratin occupying a depression on the top of the lesion, persists static period and undergoes rapid growth compared with SCC. Keratoacanthoma is usually treated by surgical excision or curettage of the base, spontaneous regression does not occur in every case. A 60 years old male who present facial lesion visit our hospital and surgical excision was done. Biopsy result was keratoacanthoma. We report case with review of literatures.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.525-526
• /
• 2007

Over-polishing is required to completely remove the material of top surface across whole wafer, in spite of a local dishing problem. This paper introduces the two-step CMP process using protective layer and high selectivity slurry, to reduce dishing amount and variation. The 30nm thick protective oxide layer was deposited on the pattern, and then polished with low selectivity slurry to partially remove the projected area while suppressing the removal rate of the recessed area. After the first step CMP process, high selectivity slurry was used to minimize the dishing amount and variation in pattern structure. Experimental result shows that two-step CMP process can be successfully applicable to reduce the dishing defect generated in over-polishing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.2
• /
• pp.243-254
• /
• 2019

This study investigates the yoga clothing market for women over 50 years old. The study found that the target demographic felt that many brands were participating in the Yoga Wear market, but most targeted 20-30 year old women. They felt it was difficult to find brands for women over 50 years old. One common complaint by the target demographic was that they experienced discomfort when wearing Yoga Wear currently available in the market. They attributed this to the fact that even the largest sizes available were not appropriate for their body size. They also noted that there is a large variety of designs presently available in the market; however, most are too colorful and revealing for their tastes. Females in their 50s or older preferred less colorful and less revealing clothes. They noted that they reacted sensitively to fat in the forearms due to changes in body shape as they grew older and wanted looser clothes. Elasticity and hygroscopicity of material are therefore very important buying criteria for the target demographic. These criteria were used to propose a prototype yoga suit designed for women over 50 years old.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.3
• /
• pp.379-386
• /
• 2007

In this paper, topographic factors over 3-dimensional hills were estimated through wind tunnel tests. Topographic models having five different slopes of $5.71^{\circ}, \;11.31^{\circ},\;16.70^{\circ},\;21.80^{\circ}$, and $26.57^{\circ}$ which were based on Korean Building Code(KBC(2005), were made for wind tunnel tests. From the result of wind tunnel tests, topographic factors over 3-dimensional hills were obtained at various locations, and the ranges of topographic effects were decided. The ranges of topographic effects was whole area of the hills in the horizontal ranges and heights of 3.5 times of the hills in the vortical ranges. Topographic effects was large at the top of hills, and wind velocity was increased 57% over hill of $5.71^{\circ}$, 75% over hill of $11.31^{\circ}$, 79% over hill of $16.70^{\circ}$, 81% over hill of $21.80^{\circ}$, and 61% over hill of $26.57^{\circ}$. Wind velocity was bigger over surface of across-wind direction of hills than one over surface of wind direction of hills, and wind velocity was increased $10{\sim}30%$ at locations of across-wind direction.