• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.74-77
• /
• 2011

PSPICE modeling of a commercial LED driver IC (TOP245P) and PC817A optocoupler is proposed for the switch-mode power supply (SMPS) (applicable to LED driver) design and simulation. An analog behavioral model of the TOP245P IC including the shunt regulator, under-voltage(UV) detection, over-voltage(OV) shut-down and SR flip-flop is developed by using PSPICE. The empirical equation of PC817A current transfer ratio (CTR) is fitted from the datasheet of PC817A. Two types of SMPSs are simulated with the averaged-model and switching-model. The simulation results by the proposed PSPICE models are in good agreement with those in the data sheet and an experimental data.

• East Asian Economic Review
• /
• v.23 no.1
• /
• pp.89-107
• /
• 2019

This paper ranks higher education in Korea based upon research productivity in business and economics disciplines. The number of SCI-level journal articles are tabulated using the Web of Science search engine, over the sample period from 1990 to 2016. The league table shows that many private universities dominate top-tier ranks, which is consistent with the school reputations most commonly cited by the general public in Korea. In contrast, many national universities appear in the second-tier, and their scanty performance in business and economics is in sharp contrast with our earlier findings in which national universities performed well in science and engineering fields (Jin and Kim, 2018). In addition, the ranking order in lower-ranked schools is found to be sensitive to a small change in publications, whereas the publication gap among top-tier schools is relatively large. Finally, unlike our general perception, the size of school does not matter for collaborative research. Some policy implications are discussed as a conclusion.

• Korean Journal Plant Pathology
• /
• v.14 no.6
• /
• pp.720-724
• /
• 1998

Open-top field chamber study was carried out to investigate effect of ambient ozone level on the yield of rice cultivar 'Dongjin' in Kwangyang area located in the vicinity of the industrial complex of Yechon petrolium refinery and chemical works or Kwangyang Iron and Steel works during the summer of 1997. mean ozone concentration of ambient air during daytime (9:00∼17:00) was revealed to exceed over 40 ppb which is defined to be a critical level causing plant injury and yield reduction in Europe. Yield component analysis showed that there was no significant difference in rice yield between ambient air and charcoal-filtered air. The results suggest that the ambient ozone levels during the exposure period had no effect on yield reduction of rice cultivar 'Dongjin' and it is likely that the cultivar is tolerant to ambient ozone levels.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.741-744
• /
• 2000

In general there occur warpage in one way long part. Warpage is caused by differential shrinkage-Orientation Effect, Volumetric Shrinkage Effect, Differential Cooling Effect -over the part. Deco-Top is located at the top of 29"TV set and it's shape is one way long$(626{\times}130mm)$. Material is used transparency ABS resin. So we can't design ribs in this part. And we use film gate to avoid weld line. In these reasons we must develop no ribs and no warpage product. In this study we use MOLDFLOW's software-MF/FLOW, MF/COOL, MF/WARP. Using MF/FLOW, set the flow balance and gate positioning. And we can set cooling channel layout and the optimum processing condition through MF/COOL and MF/WARP. In result we reduced trials and obtained good product.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.457-458
• /
• 2006

Transparent metal cathodes using Ca/Ag, Ba/Ag double layers have been fabricated to investigate its optical transmission. The transmission spectra show that Ca/Ag and Ba/Ag double layers result in higher transmittance compared to Ag single layer. The Ba/Ag double layer shows over 80% transmittance at 400 nm and 70% at 700 nm. The electroluminescence efficiency of fluorescent TEOLED using Ba/Ag transparent metal cathode was 10 ~ 15 cd/A.

• Journal of Korean Neurosurgical Society
• /
• v.50 no.6
• /
• pp.517-519
• /
• 2011

Stent assisted coiling on intracranial broad neck aneurysm has been considered as an effective technique and has made the complex aneurysms amenable to coiling. However, stent navigation and application themselves often have the problems especially when the parent vessel angle (entrance between afferent and efferent vessel) is over 90 degrees. We report here a case of a ruptured broad neck basilar top aneurysm that was successfully coiled using two self-expandable stents (Enterprise and Neuroform) placed in a fashion of modified Y-configured stents with waffle cone technique.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.26-35
• /
• 1997

In this paper, a VHDL implementation method for the internet protocol (IP) placed on top of ATM, so called IP over ATM, is presented. The proposed implementation method employs a parallel processing architecture to reduce the processing time and offers 155.52Mbps (STM-1) interface with the full-duplex mode for the ATM-based network. Furthermore, in order to minimize the search time for the table look-up, a LANCAM-based structure combining the routing table with the ATMARP table is proposed. The VHDL simulation results show that this proposed method can transmit (receive) at 155.52Mbps with delays of 48.5 clocks (29.5clocks).

• Laser Solutions
• /
• v.15 no.2
• /
• pp.11-14
• /
• 2012

In this paper, we have made a proposal concerning the beam shaping mask(BSM) using random-array slits to control intensity distribution profile of laser beam and demonstrated its proprieties experimentally. When a lot of slits are set out irregularly, diffraction patterns of light does not appear but granularity patterns as a bundle of fibers appear. Intensity distribution profile is controlled by densities distribution of circular slits arrayed randomly because the number of slits and its area means amount of light energy through BSM. Namely as the number of slits in high intensity area is increased and that in low intensity area decreased, amount of light energy is same over all local parts. So gaussian intensity distribution could be changed to flat-top.

• Ocean and Polar Research
• /
• v.34 no.1
• /
• pp.73-83
• /
• 2012

Antarctica is very sensitive to climate change but the number of stations is not sufficient to accurately analyze climate change in this regoin. Model reanalysis data supplements the lack of observation and can be used as long term data to verify climate change. In this study, the 20CR (Twentieth Century Reanalysis) Project data from NCEP/NCAR and monthly mean data (temperature, solar radiation and longwave radiation) from 1871 to 2008, was used to analyze the temperature trend and change in radiation. The 20CR data was used to validate the observation data from Antarctica since 1950 and the correlation coefficients between these data were determined to be over 0.95 at all stations. The temperature increased by approximately $0.23^{\circ}C$/decade during the study period and over $0.20^{\circ}C$/decade over all of the months. This increasing trend was observed throughout the Antarctica and a slight increase was observed in the Antarctic Peninsula. In addition, solar radiation (surface) and longwave radiation (surface and top of atmosphere) trends correlated with the increase in temperature. As a result, outgoing longwave radiation at the surface is attenuated by atmospheric water vapor or clouds and radiation at the top of the atmosphere was reduced. In addition, the absorbed energy in the atmosphere increases the temperature of the atmosphere and surface, and then the heated surface emits more longwave radiation. Eventually these processes are repeated in a positive feedback loop, which results in a continuous rise in temperature.

• Journal of Korea Society of Industrial Information Systems
• /
• v.26 no.6
• /
• pp.135-154
• /
• 2021

This paper compares and analyzes the domestic OTT services to access their success factors, strategies and examine the domestic OTT leader's wavve's unique differentiation strategy. It is a comparative study of the top five market share services based on the operator and content's key success factors criteria, revenue structure, personalization, interactive media and cooperation. As a result, the common success factors were contents that reflected the characteristics of the operators, hybrid VOD, hybrid filtering, real-time participation interaction, alliances between the same and heterogeneous industries, and utilization of existing business areas. In addition, the study confirmed that it expanded the scope of the project and operated the contents efficiently by introducing one or more business strategies. wavve has been widely validated with its content, while B2C has long-term benefits and overseas use services, and B2B has a systematic use system, differentiating itself from other services. This paper can be the foundation for identifying the strengths and differences of each service on 2021, entering the domestic OTT industry, and establishing competitive strategies.