• Journal of Korea Multimedia Society
• /
• v.15 no.10
• /
• pp.1228-1235
• /
• 2012

In this Paper, we propose an energy efficient localization technique based on WUSB (Wireless USB) over WBAN (Wireless Body Area Networks) protocol required for Wearable Computer systems. For this purpose, the proposed localization algorithm minimizes power consumption and estimates location without range information. It is executed independently on the basis of WUSB over WBAN protocol at each sensor node comprising peripherals of a wearable computer system. And it minimizes power consumption by estimating locations of sensor nodes with range-free method fast.

• Korean Journal of Mathematics
• /
• v.18 no.1
• /
• pp.63-77
• /
• 2010

Infinite finite range inequalities relate the norm of a weighted polynomial over ${\mathbb{R}}$ to its norm over a finite interval. In this paper we extend such inequalities to generalized polynomials with the weight $W(x)={\prod}^{m}_{k=1}{\mid}x-x_k{\mid}^{{\gamma}_k}{\cdot}{\exp}(-{\mid}x{\mid}^{\alpha})$.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.3
• /
• pp.66-73
• /
• 2008

This paper presents a position sensorless control system of SRM over wide speed range. Due to the doubly salient structure of the SRM, the phase inductance varies along with the rotor position. Most of the sensorless control techniques are based on the fact that the magnetic status of the SRM is a function of the angular rotor position. The rotor position estimation of the SRM is somewhat difficult because of its highly nonlinear magnetizing characteristics. In order to estimate more accurate rotor position over wide speed range, Neural Network is used for this highly nonlinear function approximation. Magnetizing data patterns of the prototype 1-hp SRM are obtained from locked rotor test, and used for the Neural Network training data set. Through measurement of the flux-linkage and phase currents, rotor position is able to estimate from current-flux-rotor position lookup table which is constructed from trained Neural Network. Experimental results for a 1-hp SRM over 16:1 speed range are presented for the verification of the proposed sensorless control algorithm.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.467-472
• /
• 2007

A modern MEMS resonator is a micro-scale structure operated over a high frequency range. In order to predict its resonant behavior in a design process, High-frequency response analysis (Hi-FRA) is demanded. Algebraic substructuring (AS) is known as a fast numerical technique to construct an eigenspace for FR and frequency sweep (FS) algorithm efficiently solves the frequency response system projected on the eigenspace. However, the existing FS algorithm using AS is developed for low-FRA, say over the range 1Hz-2KHz. In this work, we extend the FS algorithm using AS for FRA over an arbitrary frequency range. Therefore, it can be efficiently applied to systems operated at a high frequency, say over the range 230MHz-250MHz. The success of the proposed method is demonstrated by Hi-FRA of a checkerboard resonator.

• Journal of Environmental Science International
• /
• v.10 no.2
• /
• pp.143-151
• /
• 2001

The atmospheric conditions and the transport mechanism of long-range transport of air pollutants from coastal area to inland area were investigated using regular meteorological data and air pollution data obtatined from the southeastern area of Korea. Daytime temperature over the inland area(Taegu) was higher than that over the coastal area(Pusan) and the temperature difference of about 5~6$^{\circ}C$ when the thermal low most fully developed and the sea level pressure over Taegu was lower than that over Pusan by about 4~5hPa at that time. Therefore this low pressure appeared to the thermally induced low. Air mass polluted from the coastal area during the morning period was transported inland area, at first by the sea breeze and by the large scale wind system toward the thermal low generated in the mountainous inland region. This was explained by the fact that the concentration of air pollutants over Taegu increased throughtout the late afternoon.

• Atmosphere
• /
• v.20 no.2
• /
• pp.161-172
• /
• 2010

In an effort to investigate the characteristics of synoptic meteorological conditions in association with long-range transport of haze phenomena occurred over Korea, we statistically classified characteristics of haze events into two types of haze: stagnant case and long-range transport case, based on the synoptic meteorological parameters, and analyze comparatively the characteristics of synoptic meteorological conditions for each case. The results showed that the occurrence frequency of stagnant case accounts for 64.5%, showing superiority of stagnant haze cases over the long-range transport case which occupies only 35.5% among total 67 cases for the period from 2000 to 2007. This result indicates that haze phenomena occurred over Korea has influenced by not only the emission in Korea by itself but long range transport effects originating from China inland. The synoptic condition on 850hPa level showed that, when stagnant case occurred, Korean peninsula was located under the effects of negative vorticity with the significantly weak wind speed and stable atmospheric condition. In contrast, long-range transport case shows positive vorticity and relatively strong wind speed over 850hPa level, especially with the location of high pressure system over the area of southwestern China. This location of high pressure system implies to induce the westerlies or northwesteries consistently due to its pressure gradient by itself. Also other comparative studies haze days (vs.) Asian dust days are carried out, and we found out that the patterns of long-range transport of haze phenomena in Korea shows similar to Asian dust case but the static stability condition indicates more stabilized atmospheric condition than dust phenomena.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.1
• /
• pp.73-86
• /
• 2011

Haze phenomena were analyzed to assess the impact of long range transport process on the air quality of Seoul and Busan. We statistically classified haze days observed in both Seoul and Busan into two types of haze cases: stagnant case and long-range transport case, and analyzed the air pollutant levels comparatively for each of the two cases for the period of 2000~2007. The results showed that the long-range transport haze case occurs less frequently with the occurrence frequency of 35.5% than stagnant case with the occurrence frequency of 64.5%. During the observed all haze days, all pollutants have high concentration in comparison with those under other meteorological conditions (Rain, Mist, Dust, Clear, Rain+Mist) except for only $PM_{10}$ of Dust case where its level shows highest among total 6 categorized conditions. The long range transport haze case shows similar levels of $PM_{10}$ and $NO_2$, but higher $SO_2$ and lower $O_3$ compared with stagnant haze cases, suggesting the importance of sulfur chemistry for long range transport haze case and local photochemistry for stagnant haze case. In addition, by employing the NOAA/HYSPLIT-4 backward trajectory model, we subdivided the long range transport haze cases into two different sources: urban anthropogenic high emission areas of central China, and natural emission sources over north China and/or Mongolia. The former long range transport haze case shows higher occurrence (with Seoul 70% and Busan 85%) than the latter haze case (with Seoul 30% and Busan <10%). This is also implying that the long haze phenomena occurred over Korea have been influenced by not only the anthropogenic emissions but also the natural dust emissions. These both emission sources can be good contributors in calculating the source-receptor relationship over Korean atmospheric environment.

• Journal of Biomedical Engineering Research
• /
• v.36 no.3
• /
• pp.69-78
• /
• 2015

Ultrasonic physiotherapy systems should comply with IEC 60601-2-5(particular requirements for safety of ultrasonic physiotherapy equipment) standard for safety of patients and clinical performances. One of the most important parameters in the standard is the effective radiating area ($A_{ER}$). It has to be measured in accordance with IEC 61689 (field specifications and methods of measurement in the frequency range 0.5MHz to 5MHz). Typical ultrasonic physiotherapy system works in the frequency range 1MHz ~ 3MHz to comply with the IEC 61689. However, ultrasonic physiotherapy system using frequencies over 5MHz is out of the IEC 61689's scope. That is, even if such ultrasonic physiotherapy systems are developed by demands of the market, there is no standard to apply. It is the motivation for this study. Whereas there are other parameters to be considered, this study focuses on the effective radiating area and shows effectiveness of applying IEC 61689 in measuring effective radiating area of ultrasonic physiotherapy systems using frequency range over 5MHz by comparing the results of computer simulation and experiment. Results of this study shows that applying the IEC 61689 standard to ultrasonic physiotherapy system using frequency range over 5MHz is possible.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.75-76
• /
• 2016

This paper proposes a power factor correction circuit with a high efficiency over a wide load range characteristics for a communication power supply. And the characteristic verification is applied to produce a design of prototype. Power factor correction circuit can reduce conduction losses by applying Bridgeless Boost Converter for efficiency. Over a wide load range to maintain the efficient, the control method of a PWM controller is divided by two sections according to the load area. In the low-load region, it was reduced switching losses by applying the critical conduction mode control method. On the other hand, in the heavy-load area, the hysteresis current control method is used to maintain the high efficiency over a wide load range by limiting the peak noise of the inductor.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.42.1-42
• /
• 2002

A model to predict population by sex, age and district over a long-range period is proposed based on fuzzy theories. First, a fuzzy model is described. Second, a method to estimate the social increase by sex and age in each district is proposed based on a fuzzy clustering method for dealing with long-range socioeconomic changes in population migration. By the proposed methods, it became possible to predict the population by sex, age and district over a long-range period. Third, the structure and characteristics of the three models of employment model, time distance model, and land use model constructed to predict various socioeconomic indicators, which are require...