• Proceedings of the Korea Society of Design Studies Conference
• /
• 1998.04a
• /
• pp.58-59
• /
• 1998

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.6
• /
• pp.778-783
• /
• 2015

We studied about the strength characteristics of the FRP bonding method due to reduce accident on the oceans and protect life for my people. We test tension and bending strength of butt joint, lap joint, V-scarf joint, X-scarf joint. The result of test, it's pattern is similar both tension and bending strength. Tension strength and bending strength was excellent in order to X-scarf-butt joint-V-scarf-lap joint. The tension strength is the best properties X-scarf showed a 57% strength rate of the basic material, and bending strength showed a 77% strength rate of the basic material. Overall, the X-scarf 12t joint has most excellent properties of tension and bending strength. The lap joint has worst properties of tension and bending strength. We have to test having different over-lay of V-scarf and X-scarf joint each 12t, 16t, 20t. V-scarf of 20t over-lay has excellent character of tension and bending strength. But X-scarf of 12t over-lay has excellent character of tension and bending strength. The results are shown to the contrary. The ship is received a lot of stress. it's hard to compare a direction both actual and test. But we can acknowledge material basic characteristic of strength through tension and bending test. We give the four repair method; butt joint, lap joint, V-scarf joint, X-scarf joint and the reduced ratio in comparison with basic material; In addition give the separated data for V-scarf and X-scarf characteristic of 12t, 16t, 20t overlay length. For our study repair man can select good repair method in his work station.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.316-319
• /
• 2001

In weaving welding where a V groove exists, the heat input distribution is an important factor that determines the defectiveness of the bead shape, undercut and over-lap. In this study, the amount of heat input, which is determined by the welding current, voltage, speed and weaving conditions is calculated through numerical methods. Furthermore, the heat input distribution as a two- dimensional heat source was observed when applied to each groove. Therefore, a heat input control algorithm is suggested to prevent the defects generated from undercut or over-lap, which was verified through an analysis of the heat input distribution.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.339-343
• /
• 1998

Sinusoidal model 은 음성신호처리의 넓은 분야에 적용되고 있는 방법으로 고음질의 합성음을 생성해 낼 수 있고, 조작이 용이하다는 장점을 가지고 있다. 본 논문에서는 Analysis-by-synthesis/Overlap-add Sinusoidal model 이라는 방법을 이용하여 시간축 변환과 dam성 변환을 수행하였다. 특히 본 논문에서는 음질향상을 위하여 시간축 변환시에는 정적인 구간과 변화하는 구간을 구별하여 서로 다른 시간축 변환비를 이용하였고, 기존의 LPC 방법에 비해 스펙트럼 포락선을 보다 잘 추정하는 Improved Cepstrum을 이용하여 음정변환에 적용하였다. 또 서로 다른 문맥에서 얻어진 음성단위들을 결합할 때 생기는 위상차이를 극복하기 위하여, 기본주파수 성분이 일치하도록 시간축을 이동하여 합성하였다. 실험결과 본 논문에서 적용한 방법들을 통해 기존 방식에 비해 개선된 음질을 얻을 수 있었다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.12-13
• /
• 2021

As construction projects are gradually getting larger and focusing on building skyscraper with the development of construction technology and the concentration of population in cities, the choice of the soil sheeting works is very important in terms of securing safety and economic feasibility. Further research is planned on the developed concrete guide-based continuous over lap pile method through the introduction of a system that automates vertical management, continuous improvement and supplementation so that the basement soil sheeting wall can be utilized as a building structure.

• Korean journal of communication and information
• /
• v.16
• /
• pp.168-206
• /
• 2001

This study attempts to examine the relationships between the major market-based media and the government after closing military regime era, 1961-1987. After the military regime was collapsed, while the mass media in Korea obtained independence and autonomy from government, they have been confronted with the terrible competition not so much comparatively as before. The watchdog role in the traditional liberalism, which is regarded as normative relationship between the media and the government would be transformed in accordance with the market condition and the maturity of democracy. Thus, the watchdog metaphor has been variously deviated in rower-centered society; lap dog, guard dog, attack dog. liberalists argue that the primary democratic role of the media is to art as a public watchdog overseeing the state. Social democrats, however, criticize them as simplistic conception which could be only applied to the government. They argue that the media should be seen as a source of redress against the abuse of all forms of power over others; the home, the economy, and the civil society. The lap dog view is that the media is overwhelmingly dependent on the established power structure contrary to the watchdog. While the guard dog perspective is a means to preserve the power structure alarming with playing 'conflict role', the attack do8 aims to the private interest of the media in intruding into the politics. The attack dog perspective by T. Patterson could be composed of the interpretive style of report, the game schema report over the policy schema in the election, and the negativism against politics and government. The market-dominant press has been likely to transform from lap-guard dog into attack-guard dog. In Roh Tae Woo government(1988-1992), while the press was a lessened lap-guard dog before three parties merger in 1990, after merger the press had been transformed as the reinforced lap-guard dog because this merger entailed joint, party-to-party negotiations, and the formation of the new party preceded by dissolution of the ruling blot. In the early stage of Kim Young Sam government(1993-1997), the press has kept in pace with the reform movement drive-forced by the government. However, the press withdrew the support of Kim's reform in reaching the level of threat to ruling bloc. The press coalesced only circumstantially with government and was interested in preserving some margin of independence. The failure of Kim's reform proved the political muscle of the press in post-autho-ritarianism. In the middle stage of Kim Dae Jung government (1998-) that resulted in the shift of power structure as once-opposition party leader, the stress has been a manifested attack-guard dog owing to the anti-cold war policy, the realignment policy of power, and the minority-base of Kim's government. The press has endeavored to hold political communication within limits relatively less threatening to the established order.

• Journal of Biomedical Engineering Research
• /
• v.14 no.1
• /
• pp.41-50
• /
• 1993

This paper proposes an adaptive technique for the cardiac output regulation of a pendulum type electromechanical TAH. This techinque, which consists of two RLSE's and two PASTC' 5, performs Its controllability over the TAIB so that the m(RAP) and m(LAP) values re- main close to their desired values under she assumption that the variation of m(RAP) and m (LAP) are dominated by the variation of C.0. and the difference between the left and right ventricular output, respectively. To evaluate the performance of the proposed control system, a simulation is performed by using a human model which contains physiologic, drug and treatment, artificial heart and noise models. As a result, dual adaptive controller showed that abnormal m(LAP) and m(RAP) could be recovered to the normal range within 10minute and maintained desired value in steady state. The operation of this controller prored to be robust in spite of the rapid variation of human status.

• Journal of Welding and Joining
• /
• v.28 no.1
• /
• pp.34-40
• /
• 2010

In Friction Stir Lap Welding(FSLW), the movement of material within the weld was more important than the microstructure, due to the interface present between the sheets. Thus, The soundness of free defect, Effective Sheet Thickness(EST) and width of joint were most important factor of mechanical properties. Specimens by lap joint types that were 'A-type' and 'R-type' were made in this study. A-type tensile specimen was loaded at advancing side and R-type tensile specimen was loaded at retreating side. Macro-, micro-structural observation and mechanical properties of FSLW A5052-H112 alloy ware investigated under varying rotating and welding speed. The results were as follows: Material hook formed decreasing after sharply increasing was appeared at the end interface of joint area in advanced side, and material hook formed decreasing after smoothly increasing was observed at that in retreated side. Tensile load had no relation with defects. As rotating speed was higher, tensile strength was increasing and EST was decreasing regardless of joint types. joint efficiency was over 70%. In a result of fractography, fracture in A-type was partially occurred by dimple in SZ, and fracture in R-type was generally occurred by dimple in HAZ.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.626-629
• /
• 2004

Recently, the self-healing technique is being investigated to repair the damaged polymeric composites by the use of microcapsules with the healing agent. This technique can obtains both the damage detection and the damage repair simultaneously over the converntional repairing techniques. In this study, the effects of the catalyst ratio to the healing agent and thermal characteristics to the mixtures of healing agent are investigated through single lap shear tests and DSC. The Healing agents such as DCPD, ENB, and their mixtures are considered and Grubb's catalyst is used as a catalst.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.865-871
• /
• 2003

This paper presents the test results of 24 beam-end specimens to investigate the effect of concrete strength and cover thickness on the development resistance capacity in tensile lap splice length regions. The results showed that as higher strength concrete was employed, nor only development resistance capacity was influenced by cover thickness, but also more sufficient safety factor reserved shorter than the lap splice length provision in current design code. From experimental research results, high-strength concrete development length was not inverse ratio of ($\sqrt{f_{ck}}$) but directly inverse of $f_{ck}$, and it is also said that there is a certain limit length of the embedded steel over which the assumption of uniform bond stress distribution is valid specially for high-strength concrete not having a same embed length such as normal-strength concrete in current design criteria hypothesis.