• Transactions of Materials Processing
• /
• v.8 no.4
• /
• pp.356-363
• /
• 1999

This paper discusses some techniques for the determination of optimum blank size and pre-form design for multi-stepped deep drawing of oval shell. The deep drawing process of oval shape has been regarded as more difficult than that of cylindrical shell because of its complicated behavior of plastic deformation. But there is insufficient information in this area to carry out successful deep drawing work of irregular products such as oval, rectangular, and square shapes. In order to find the optimum conditions, the drawing apparatus for two kinds of pre-form design are built, a series of drawing experiments performed, and thickness stain distributions measured. From the results of thess suggested experiments, various optimum process variables are observed and discussed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.15-22
• /
• 2002

Considering the high temperature durability, the most important issue is to accurately predict the maximum operating temperature of the shell, mat and substrate. This temperature prediction then defines the material selections far the mat, shell and cones, and allows an assessment to be made as to the necessity of heat shielding. In this papers, The commercial code FLUENT was utilized to simulate automotive oval type catalytic converters, with the objective of predicting thermal behavior under steady-state, high-load conditions. Specialized computational models are used to account for effects of heat and mass transfer in the monolith, conjugate heat transfer in the various converter materials, and radiation heat transfer.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.25 no.2
• /
• pp.205-208
• /
• 2012

Antheraea pernyi silkworm is a well known wild silkworm to produce a valuable silk fiber. A. pernyi silkworm was reared in Korean oak field and examined the cocoon characteristics, such as cocoon weight, cocoon shell weight, and percentage of cocoon shell weight. Degumming loss was also measured after alkali degumming process. A. pernyi silkworm spins tawny color cocoon in oval shape. Cocoon shell weight of A. pernyi silkworm, 0.78 g, was heavier than that of B. mori silkworm, 0.51 to 0.63 g. Cocoon shell percentage of A. pernyi silkworm, 32.8%, was higher than that of B. mori silkworm, 23.4 to 25.2%. Degumming loss percentage of A. pernyi silkworm, 17.1%, was lower than that of B. mori silkworm, 25.0%. SEM showed that the surface of the cocoon filament was coarse and oriented with longitudinal direction.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.3
• /
• pp.115-125
• /
• 2008

Recently, Exhaust Gas Recirculation (EGR) system which re-flow a cooled exhaust gas from vehicles burning diesel as fuel to a combustion chamber of engine has been used to solve the serious air pollution. For the design and mass production of EGR system, it is essential to ensure structural integrity evaluation. The EGR system consisted of ten dimpled oval core rectangular tubes, two fix-plates, two coolant pipes, shell body and two flanges in this study. To confirm the safety of the designed system, finite element modeling about each component such as the dimpled oval core tube with the dimpled shape and others was carried out. The reliability of EGR system against exhaust gas flow with high temperature was investigated by flow and pressure analysis in the system. Also, thermal and strength analysis were verified the safety of EGR system against temperature change in the shell and tubes. Furthermore, modal analysis using ANSYS was also performed. From the results of FE analysis, there were confirmed that EGR system was safe against the flow of exhaust gas, temperature change in EGR system and vibration on operation condition, respectively.

• The Korean Journal of Malacology
• /
• v.27 no.3
• /
• pp.191-192
• /
• 2011

Pulmonate snail, Onchidium hongkongensis from muddy flat of Muan-gun was recorded as new to the Korean molluscan fauna. Shell-less body light-gray or reddish-gray in colour, oval shaped with numerous pustules on dorsal surface usually covered with mud. Black pair of tentacles with terminal eyes. Including the new record in this study, the family Onchidiidae 2 genera and 2 species in the Korean waters.

• The Korean Journal of Malacology
• /
• v.31 no.3
• /
• pp.253-255
• /
• 2015

The family Olividae includes predatory species with medium-sized, glossy, elongated oval-shaped shell. As sand-dwellers, they are broadly distributed in tropical and subtropical oceans. They feed mostly on other mollusks and carrions including sea snails and bivalves. To date, two species in the genus Amalda (subfamily Ancillinae) have been reported in Korean waters. In this study, Amalda rubiginosa (Swainson, 1823) was collected from Korean waters and morphologically described in details as a first record.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.1
• /
• pp.17-22
• /
• 1972

This results concerning the growth of transplanting of the oyster seed, Crassostrea angulata and Ostrea Iurida, which were transplanted from Japan by air, and cultivated by the raft suspended method at the coast of Yeongoo-Ri, Koje-Goon, located on the southern coast of Korea from January to December 1970, are as follows, 1. The mean shell height of O. lurida was 36.4mm, and the shape of the shell was round and small. On the other hand, the mean shell height of C. angulata was 87.4mm and the shell length was 52.3mm, and the shape of the shell was oval and large, 2. O. lurida and C. angulata oysters grew well when the water temperature was above $16^{\circ}C$ and the specific gravity ranged from 1.0171 to 1.0236 from June to July. 3. There was a little difference in relative valiance between shell length and height of O, lurida but significant difference was shown in C. angulata from July to November. 4. The mortality rate of O. lurida was $35.2\%$ and that of C. angulata was $21.7\%$ respectively.

• The Korean Journal of Malacology
• /
• v.15 no.2
• /
• pp.115-119
• /
• 1999

We investigated the processes of egg and larval developments for aquaculture technique development of seedling production fo the flat oyster, Ostrea denselamellosa. Teo flat oyster of larviparous type was different from the pacific oyser (ovivarous type) because their larvae (trochophore and prodissoconch larvae) in the gill released into the seawater. The process of egg development was observed by artificial fertilization at $25^{\circ}C$, using a dissecting method. The sizes of Unfertilized eggs ranged from 80 to 90 $\mu\textrm{m}$ and fertilized eggs with globule-shape was 90-100 $\mu\textrm{m}$. The Polar body appeared after fertilization and egg cleavage began within 1 hour, reaching the blastula stage after 10 hours. The trochophore in the gill appeared 2-3 days after fertilization and grew to the prodissoconch larvae (130 140 $\mu\textrm{m}$) having a complete shell after 1-2 days. The shell of prodissoconch larvae grew to 205 220 $\mu\textrm{m}$ after 10 hours, and then they became umbo stage larvae showing oval in shape. The velum of umbo stage larvae was degenerated about 17-20 days after fertilization and grew into a pediveliger with a developed foot, at this time, the shell length size was 320 360 $\mu\textrm{m}$.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.2 no.2
• /
• pp.111-117
• /
• 2001

Screening of fifteen bivoltine silkworm breeds of Bombyx mori Linn at a temperature of $31{\pm}1^{\circ}C$ and relative humidity of 85${\pm}$5% resulted in the identification of eight thermo-tolerant breeds. The survival and cocoon shell ratio of the tolerant breeds ranged from 72.7 to 78.7% and 20.0 to 20.1% respectively. The tolerant breeds comprised of four oval breeds and four dumb-bell breeds. Eight foundation crosses prepared by crossing the oval and dumb-bell parents among themselves were screened at a temperature of $31{\pm}1^{\circ}C$ and relative humidity of 85{\pm}5%. The performance of the foundation crosses on 11 economic characters were analysed by employing Multipie Trait Evaluation Index method. Four foundation crosses which scored average index value > 50 were selected as breeding parents and breeding initiated for the evolution of thermo-tolerant bivoltine silkworm breeds. The methodology and the results of the foundation crosses reared both at 31{\pm}1$^{\circ}C$ and at $25{\pm}1^{\circ}C$ temperatures, are discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3971-3976
• /
• 2009

In this study, we secured wasted oyster shells as raw materials in order to applicate it to corrosion preventive ceramic coating reagent in the drinking water pipeline. Then, we investigated physicochemical properties in terms of basic calcination processing. Oyster shell was composed with 92.08% of $CaCO_3$ and the shapes of the pulverized particles were mostly oval. The calcined oyster shell showed increasing tendency of weight loss and of calcium content with the lapse of time and increase of temperature. The result indicates that the higher calcination processing temperature and the uniformly smaller particle size give more efficiency during calcination process. Therefore it is anticipated to be a good ceramic material to protect a surface of cleaning bed and inside of a tap water pipes from corrosion.