• 한국의류산업학회지
• /
• 제20권6호
• /
• pp.704-712
• /
• 2018

This study analyzed working postures using the Ovako Working Posture Analysis System (OWAS) to improve work clothes for construction workers. A video taken at a construction work site was stopped at regular intervals and the postures of relevant body parts proposed by OWAS was recorded. Additionally, based on analysis of the working postures code, the level of work action for each postures was classified from stage I to IV. General workers frequently straightened or bent forward at the waist, and used their legs to stand, bend, or walk. Wood workers moved extensively from the waist, keeping their legs relatively straight and their arms held below their shoulders, repeatedly tapping with a hammer weighing less than 10.0kg. Rebar bending workers mainly bent forward at the waist, with both legs bent or standing with one leg bent. Rebar transport and fixing workers walked with the waist straight, and occasionally one or both hands held above the shoulders. Their work also involved holding a hook, which weigh less than 10.0kg, in their hands, and the difficult task of lifting and placing long rebars, which weigh from 10.0 to 20.0kg or more. Concrete pouring workers bent or twisted their back to the side. Therefore, this study suggests that design goals should be different when developing workwear for each type of worker.

• 한국산업융합학회 논문집
• /
• 제24권3호
• /
• pp.271-281
• /
• 2021

Pinus densiflora and Larix kaempferi forests not only extended the plantation management area but also cultivated to the sustainable wood supply chain during the last 5-years. These prescriptions are primarily done by manual operation activities, particularly in young tree tending. Two types of tending activities, brashing by brush cutter(BB) and pruning by pruning shear and saw(PP), were selected for the investigate of musculoskeletal disorders' level and postural risks using Ovako Working Posture Analysis System (OWAS). The postural risk indexes (BB and PP) ranged from 115 to 125 and 102 to 105, respectively. There is no significant difference between the species. The young tree tending operations had low postural risks. The results may be used as basic data to develop technical guideline for safe young trees.

• 대한안전경영과학회지
• /
• 제22권2호
• /
• pp.31-38
• /
• 2020

The study evaluated the accuracy and intra-rater reliability for OWAS (Ovako Working posture Analysing System), RULA (Rapid Upper Limb Assessment), REBA (Rapid Entire Body Assessment) to improve their evaluation accuracy and reliability. Participants (n = 163) with undergraduate degree were recruited in this study and trained for 6 hours about the ergonomic assessment methods. Ergonomic assessments were conducted using OWAS, RULA, and REBA for a representative work with dynamic posture found in manufacturing industries. The study compared action categories (overall level) and detailed evaluation scores for individual body part. Action categories of the participants significantly differed from the golden reference defined by ergonomic experts. The participants underrated or omitted scores for truck (37.4% of the participants) and legs (52.8%) in OWAS. Similarly, the participants underrated or omitted additional scores for all body parts except the hand and wrist in RULA (53.5%) and REBA (54.8%). On the other hand, the participants overrated scores for the hand and wrist in RULA (55.2%) and REBA (39.9%). The results found in this study can help of selecting focus points and parts during assessment and education to improve accuracy and reliability of the ergonomic assessment methods.

• 한국직업건강간호학회지
• /
• 제11권2호
• /
• pp.121-131
• /
• 2002

Objective: The purpose of this study was to determine the physical load by identifying harmfully working postures and to develop recommendations for improving the existing situation with nurses in ICU, thereby to provide the basis for development of work-related musculoskeletal preventive program. Method: Various types of tasks were recorded with a video camera to chart and analyze different postures by OWAS(Ovako Working Posture Analysing System). Collected data showed that poor postures were adopted, not only for lifting or repositoning a patient, but also for other tasks. Data Analysis: The performed activities were then divided into Nursing Intervention Classification. Altogether 128 postures were selected for analysis. Then they were classified into different OAC (OWAS Action Categories). From all the observation, unhealthy postures, for which corrective measures had to be considered immediately (i.e., 75% classified as OACII+III+IV) were found. Collected data were analyzed in terms of percentage, 2-tail Mann-Whitney U test. Result: Poor postures mainly occur during 'positioning the patient' and 'airway suctioning' in NIC. No difference was found (p=0.060) between the percentage of harmful posture adopted during the patient handling tasks and non-patient handling tasks. Conclusion: This study shows, that in the nursing profession with ICU not only occur during patient handling, but also during other activities. The OWAS method was useful in determining the physical load by locating potential activities due to harmfully working postures, providing a detailed description with analysis, and suggesting successful means to reduce postural load.

• 한국산림과학회지
• /
• 제109권2호
• /
• pp.195-201
• /
• 2020

산림작업은 비정형화된 작업 환경(날씨, 지형)에서 신체의 반복적인 동작 등으로 인하여 근골격계 질환에 취약하다. 특히, 조림목의 원활한 생장을 위해 실행하는 풀베기와 칡덩굴제거 작업은 여전히 많은 인력이 투입되고 있으며, 이 작업자세에 대한 인간공학적 평가가 필요하다. 따라서 본 연구에서는 OWAS (Ovako Working Posture Analysis System) 분석방법을 이용하여 예초기를 이용한 풀베기 작업과 낫·손톱을 이용한 칡덩굴제거 작업의 신체부담을 정량적으로 평가하였다. 또한 작업자세 위험도 지수(Postural risk index: PRI)를 통하여 산림작업의 위험 정도를 분석하였다. 풀베기와 칡덩굴제거 작업원에 대한 작업자세를 분석한 결과, 칡덩굴제거작업의 작업자세 위험성이 풀베기작업에 비해 통계적으로 더 높은 수준을 보였다. 칡덩굴을 제거하는 작업 과정 중에서 다리에서는 두 다리를 구부리는 자세와 무릎 꿇는 자세의 비율이 높게 나타나기 때문에 근골격계에 부정적 영향을 미치는 것으로 판단된다. 이 연구결과는 풀베기와 칡덩굴제거 작업원의 작업부하 및 근골격계 질환을 저감하는 기초자료로 활용될 수 있을 것으로 기대된다.

• 한국산림과학회지
• /
• 제110권2호
• /
• pp.210-216
• /
• 2021

우리나라 모든 산업에서 근골격계질환은 작업자들의 안전에 큰 영향을 미치고 있으며, 산림작업은 산업안전보건법에 따라 근골격계 부담작업으로 분류된다. 특히 벌도 및 가지제거작업은 주로 인력작업으로 실시되고 있으며, 작업원의 안정성 확보를 위해 작업자세에 대한 평가가 필요하다. 따라서 본 연구는 체인톱을 이용한 벌도 및 가지제거작업의 작업자를 대상으로 세가지 인간공학적 분석 도구(OWAS, RULA, REBA)를 이용하여 위험도를 평가하고, 평가기법별 작업자세에 대한 영향인자를 분석하였다. 벌도와 가지제거작업자세의 위험도는 RULA, OWAS, REBA 순으로 높게 평가되었으며, 대부분 2-3단계로 작업자세의 즉각 변경조치는 요구되지 않았다. 하지만 벌도작업에서 허리와 다리를 굽힌자세와 가지제거작업에서 벌도목 위에서 작업하는 자세는 위험도가 매우 높게 분석되었다. 또한 벌도작업의 경우 산지경사, 가지제거작업의 경우는 지상에서부터 벌도목 높이가 작업위험도 평가에 영향이 높은 것으로 분석되었다. 따라서 산림작업에 있어서 작업자의 안전성을 확보하기 위해 작업부하가 낮은 자세(벌도작업: 쪼그리는 자세, 가지제거작업: 허리와 다리가 곧은 자세)로 작업하는 것이 바람직한 것으로 사료된다.

• 반도체디스플레이기술학회지
• /
• 제21권2호
• /
• pp.117-122
• /
• 2022

This paper proposes a method for evaluating the work of manufacturing workers using MediaPipe as a risk factor for musculoskeletal diseases. Recently, musculoskeletal disorders (MSDs) caused by repeated working attitudes in industrial sites have emerged as one of the biggest problems in the industrial health field while increasing public interest. The Korea Occupational Safety and Health Agency presents tools such as NIOSH Lifting Equations (NIOSH), OWAS (Ovako Working-posture Analysis System), Rapid Upper Limb Assessment (RULA), and Rapid Entertainment Assessment (REBA) as ways to quantitatively calculate the risk of musculoskeletal diseases that can occur due to workers' repeated working attitudes. To compensate for these shortcomings, the system proposed in this study obtains the position of the joint by estimating the posture of the worker using the posture estimation learning model of MediaPipe. The position of the joint is calculated using inverse kinetics to obtain an angle and substitute it into the REBA equation to calculate the load level of the working posture. The calculated result was compared to the expert's image-based REBA evaluation result, and if there was a result with a large error, feedback was conducted with the expert again.

• 한국응급구조학회지
• /
• 제27권3호
• /
• pp.33-46
• /
• 2023

Purpose: This study aims to evaluate the risk of work-related musculoskeletal disorders (WMSDs) in 119 EMT during patient-carrying tasks using a long backboard (LBB) and a variable stretcher. Methods: Manikins were used as patients, and 45 new 119 EMT from K Fire Academy were filmed performing patient-carrying tasks on stairs. The tasks were analyzed using Ovako working posture analysis system (OWAS) and Rapid entire body assessment (REBA). Results: In using LBB, the OWAS score was Mode 3(Mean 2.37, Maximum 3), requiring as soon as possible corrective action, the REBA score was Mode 11(Mean 9.16, Maximum 11), requiring immediate improvement. In using variable stretcher, the OWAS score was Mode 1(Mean 2.33, Maximum 3), non-necessity for corrective action, the REBA score was Mode 9(Mean 8.0, Maximum 11), requiring as soon as possible. Conclusion: In conclusion, improvement was needed in one task (carrying a patient using a LBB) in the OWAS and in two tasks (carrying a patient using a LBB, carrying a patient using a variable stretcher) in the REBA. Thereby, required attention and management of WMSDs during training. In addition, it is essential to carry out objective and quantitative assessments through ergonomic analysis by occupational health professionals when designing future training programs to prevent WMSDs.

• 한국직업건강간호학회지
• /
• 제12권1호
• /
• pp.31-38
• /
• 2003

This study is an attempt to analyze the physical load by the type of the nursing tasks at the neurosurgical ICU nurses through the quantitative analysis of the working postures by the type of the nursing tasks with the OWAS(Ovako Working Postures Analysis System). Data collection was conducted through the video recording of the 13 nurses working at the neurosurgical ICU. For the analysis of the work postures by the type of the nursing tasks, and were interviewed regarding the subjective degree of the difficulties with the work postures related to the tasks. Collected data was analyzed through the WinOWAS program. The results were as follows : AC3 or AC4 tasks among the 18 nursing tasks types are "occupied bed making and change of the patient gown", "back massage", "suction", "elimination management", "change of position", "adjustment of bed", "helping the patient to move","measurement of CVP"and "measurement of urine volume". It appears that these tasks are harmful to the musculoskeletal system and the improvement or change of the work is required. The results stated above indicate that improper working postures during the nursing tasks influence the musculoskeletal system. Therefore, making use of assistant devices for the improvement of the working environment at the nursing tasks, based on human technological diagnoses, is required regarding the duty types with massive work pressure known to be harmful to the musculoskeletal system among those performed by the nurses. And there is a need of the education about the employment and maintenance of the vocational back pain prevention.

• International Journal of Quality Innovation
• /
• 제9권1호
• /
• pp.22-40
• /
• 2008

Unnatural working postures usually cause musculoskeletal problems for workers in work field, especially in traditional industry. Many analysis and survey methodologies have been developed to identify unnatural postures and disorder risks in workplaces. The Ovako Working Posture Analyzing System (OWAS) and Nordic Musculoskeletal Questionnaire (NMQ) are the representative methods and applied widely. This study applied the both tools to investigate the work field of a manufacturing factory of the water heater's case. We divided the manufacturing process into nine workshops, took the pictures of working motions by DV camera and analyzed the postures on OWAS. From the OW AS results, we could identify the risks level of musculoskeletal symptoms as four Action Categories (AC). And from the comparison of OWAS and NMQ results, we could provide the suggestions to improve the working methods and environment. From the results of OWAS, we found that the operators' head/neck and back were above AC3 in some workshops. If the situation continued in long period, the operators might have the risk to get musculoskeletal symptoms. From the investigation of NMQ, we also found that the percentage of aches on neck, shoulders and lower back were higher than other parts of body. The correlation between aches and jobs was more than 75%. So we provided some suggestions to improve: work rotation and adjustment of work surface/height to fit in with Ergonomics. Then the risks of musculoskeletal symptoms would be reduced.