• Journal of the Korean Society of Costume
• /
• v.53 no.6
• /
• pp.25-43
• /
• 2003

This study is to classify the types of Jikryung and to look into formative . periodic Characteristics. Results of analyzing can be described as follows. 1. Jikryung in the Chosun Era was classified according to whether it had a side hem. Jikryung which had side hem was reclassified according to the position of the side hem into inside, inside and outside and outside fold types and backward leaning type. Jikryung with no side hem was reclassified into types of closed and opened sides. 2. Concerning formative Characteristics, the type of inside fold was coexisted with the types of short front and long rear, the same front and rear, and narrow sleeves, bean chaff typed sleeves. Inside and outside fold type was used the type of short front and long rear, narrow sleeves. Outside fold type was used the type of same front and rear, bean chaff typed sleeves. Backward leaning type was used the same front and rear, wide sleeves. The types of closed and opened sides transformed from double Sup to single Sup and from narrow sleeves to bean chaff in its form and wide sleeves. 3. Concerning periodic Characteristics, the 1st period of Jikryung with side hem showed up the type of inside and outside fold, the 2nd period did the type of outside fold, The 3rd period did the type of backward leaning. Regarding Jikryung with no side hem, its 1st and 3rd periods saw the type of closed side, while its 2nd period coexisted with the types of closed and opened sides.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.3
• /
• pp.248-254
• /
• 2005

The purpose of this study was to investigate the distribution of stress within the regenerated bone surrounding the implant using three dimensional finite element stress analysis method. Using ANSYS software revision 6.0 (IronCAD LLC, USA), a program was written to generate a model simulating a cylindrical block section of the mandible 20 mm in height and 10 mm in diameter. The $5.0{\times}11.5-mm$ screw implant (3i, USA) was used for this study, and was assumed to be 100% osseointegrated. And it was restored with gold crown with resin filling at the central fossa area. The implant was surrounded by the regenerated type IV bone, with 4 mm in width and 7 mm apical to the platform of implant in length. And the regenerated bone was surrounded by type I, type II, and type III bone, respectively. The present study used a fine grid model incorporating elements between 250,820 and 352,494 and nodal points between 47,978 and 67,471. A load of 200N was applied at the 3 points on occlusal surfaces of the restoration, the central fossa, outside point of the central fossa with resin filling into screw hole, and the functional cusp, at a 0 degree angle to the vertical axis of the implant, respectively. The results were as follows: 1. The stress distribution in the regenerated bone-implant interface was highly dependent on both the density of the native bone surrounding the regenerated bone and the loading point. 2. A load of 200N at the buccal cusp produced 5-fold increase in the stress concentration at the neck of the implant and apex of regenerated bone irrespective of surrounding bone density compared to a load of 200N at the central fossa. 3. It was found that stress was more homogeneously distributed along the side of implant when the implant was surrounded by both regenerated bone and native type III bone. In summary, these data indicate that concentration of stress on the implant-regenerated bone interface depends on both the native bone quality surrounding the regenerated bone adjacent to implant and the load direction applied on the prosthesis.