• 한국의학물리학회지:의학물리
• /
• 제25권2호
• /
• pp.116-121
• /
• 2014

본 본문은 Bio-MEMS 공정으로 제작한 마이크로 세포 분석 바이오칩을 사용하여 적혈구의 광학적 특성을 전압으로 측정한 실험이다. Bio-MEMS 공정을 이용하여 세포의 원활한 이동과 측정 분석에 사용되는 글라스에 채널 패턴 에칭을 위하여 포토리소그래피(photolithography)와 산화완충식각(BOE: buffered oxide etchant) 공정 조건, 세포 분석과 정보 전달에 사용되는 광섬유의 에칭을 위하여 산화완충식각 공정 조건, 세포나 유체를 칩과 외부의 전달 등에 사용되는 글라스의 홀을 위하여 전기화학방전(ECD: electro chemical discharge) 공정 조건, 글라스 접합을 위한 자외선반응접합(UVSA: ultraviolet sensitive adhesives) 공정 조건을 정립하였다. 또한 유체나 세포의 흐름 제어를 위한 라미나 흐름 조건, 적혈구세포에 대한 산란빔 파형을 측정하였다. 적혈구 실험을 통하여 출력 광섬유의 각도에 따른 산란빔이 출력측의 광섬유각도가 $0^{\circ}$일 때 약 17 V, 각도가 $5^{\circ}$일 때 약 10 V, 각도가 $10^{\circ}$일 때 약 6 V, 각도가 $15^{\circ}$일 때 약 4 V의 전압(Vpp)으로 측정되었다. 따라서 마이크로 세포 분석 바이오칩 제작의 소형화, 단순화, 공정신간 단축, 정량화하였고 적혈구의 광학적 특성을 측정을 측정함으로써 의공학(biomedical), 바이오칩공학(biochip), 반도체공학(semiconductor), 생물정보학(bioinformatics) 등의 응용과학 분야 발전에 기여할 것으로 기대한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1005-1008
• /
• 1992

This paper deals with a method to Improve the input current waveform in a single phase Rectifier. This method is based on the sophisiticated utilization of the auxiliary circuit consisting of two SCRs and a interphase reacter and the condenser necessary for reducing the fluctuating voltage in output side. The basic theories of the proposed system is treated, and its validity is verified with simulation.

• 대한전기학회논문지
• /
• 제32권3호
• /
• pp.76-83
• /
• 1983

This paper describes the method of operating the phase controlled rectifier by controlling the firing angle in III, IV quadrant to absorb the lrading reactive power and of improving the waveform of ac current by driving dual converter. The system is intended to compensate the reactive power for any lagging load. Also, by the above method this paper enables us to improve the power factor and waveform referred to the source current and the dc output voltage in the converter.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1058-1061
• /
• 2002

This paper presents the method of low power optimization considering the glitch reduction in CMOS circuits. Our algorithm utilizes the information of MOS size, the load capacitance of fan-out, and input slew to calculate the output waveform by using the linear signal model. Therefore, the accurate waveform of glitch can be obtained for estimation of power dissipation caused by glitches. Our algorithm is applied to ISCAS’85 benchmark circuits and experimental results show 23% glitch reduction and 11% total power reduction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.543-546
• /
• 1987

Trapezoidal wave is suitable for the modulating signal of the microcomputer based PWM inverter for the use of motor drives because the switching patterns can be generated by means of on-line computation. In this paper, the output waveform of three-level modulation inverters for the trapezoidal modulating signal is investigated both theoretically and experimentally.

• ETRI Journal
• /
• 제26권6호
• /
• pp.657-660
• /
• 2004

We propose a fine phase tuner and a rounding processor for a numerically controlled oscillator (NCO), yielding a reduced phase error in generating a digital sine waveform. By using the fine phase tuner presented in this paper, when the ratio of the desired sine wave frequency to the clock frequency is expressed as a fraction, an accurate adjustment in representing the fractional value can be achieved with simple hardware. In addition, the proposed rounding processor reduces the effects of phase truncation on the output spectrum. Logic simulation results of the NCO using these techniques show that the noise spectrum and mean square error (MSE) for eight output bits of a 3.125 MHz sine waveform are reduced by 8.68 dB and 5.5 dB, respectively, compared to those of the truncation method, and 2.38 dB and 0.83 dB, respectively, compared to those of Paul's scheme.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.181-184
• /
• 2005

Operating conditions of photovoltaic power generator is very sensitive to the PV modules. The PV module's control is an importance issue in the removing DC ripple noise. In this paper, the phase-shifted-carrier technique, which is a new three-step dc-dc power multi-converter schemes, is applied to solar generator system to improve the output current waveform. The novel type of three-step dc-dc converter presented has many features such as the good output waveform, high efficiency, low switching losses, low acoustic noise. The circuit configuration is constructed by the conventional full-bridge type converter circuit using the isolated DC power supply for which the solar cell is very suitable. In the end, a circuit design for understanding three-step dc-dc converter and new solar power system were presented

• Journal of electromagnetic engineering and science
• /
• 제2권1호
• /
• pp.5-10
• /
• 2002

We have analized the inverse class-F and class-F amplifiers using their waveforms. From the analytic equations derived from the analysis, we have calculated tole efficiencies, output powers, DC power dissipations, and optimum fundamental load impedances of the inverse class-F and class-F amplifiers. We also have compared them for various operation conditions, which include the same peak current, saute DC power dissipation, same fundamental RF output power, and same fundamental load impedance with different Ron(on-resistance). These analyses have clearly shown the performance limitations, advantages, and guide to the optimized design of the inverse class-F amplifiers.

• 대한전기학회논문지
• /
• 제33권9호
• /
• pp.347-354
• /
• 1984

This paper presents a method of improving the power factor and , the waveform of A.C line currents and the output waveforms of AC to DC fully bridge converter systems which is achieved by connecting CON I.II and CON III.IV in series and parallel. The basic principle of the CON I.II.III.IV's operation is simple and feasibility of thease converter is proved by experiments. CON I and CON III are constructed of natural commutation, CON II and CON IV are constructed of forced commutation. The experimental results show that the power factor and waveform of the source currents and the output waveforms are improved by the method of connecting converter in series and parallel and driving it in I, II, III, IV quadrant.

• 한국통신학회논문지
• /
• 제23권4호
• /
• pp.1121-1133
• /
• 1998

본 논문에서는 출력측의 전류 및 전압 파형 분석을 통한 대신호 전력증폭기의 새로운 설계 방법을 제시하였다. 기존의 고효율 이론인 하모닉 로딩 이론을 좀더 실제 소자에 적합하도록 수정하여 적용하였으며, 전력증폭기의 대신호 동작시 발생하는 바이어스점의 변화를 고려하여 '대신호 입력시의 실제적인 바이어스점'의 개념을 제시하였다. 제시된 이론을 바탕으로 HEMT 소자를 사용하여 2GHz대의 전력증폭기를 제작하였으며, 제작된 증폭기는 2V의 바이어스 전압에 대해 14dBm의 출력과 46%의 드레인 효율, 38%의 전력부가효율 및 7.8dB의 전력이득의 특성을 나타냈다.