• Title/Summary/Keyword: Output current

Search Result 4,002, Processing Time 0.031 seconds

Characterization of Schottky Diodes and Design of Voltage Multiplier for UHF-band Passive RFID Transponder (UHF 대역 수동형 RFID 태그 쇼트키 다이오드 특성 분석 및 전압체배기 설계)

  • Lee, Jong-Wook;Tran, Nham
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.44 no.7 s.361
    • /
    • pp.9-15
    • /
    • 2007
  • In this paper, we present the design of Schottky diodes and voltage multiplier for UHF-band passive RFID applications. The Schottky diodes were fabricated using Titanium (Ti/Al/Ta/Al)-Silicon (n-type) junction in $0.35\;{\mu}m$ CMOS process. The Schottky diode having $4{\times}10{\times}10\;{\mu}m^{2}$ contact area showed a turn-on voltage of about 150 mV for the forward diode current of $20\;{\mu}A$. The breakdown voltage is about -9 V, which provides sufficient peak inverse voltage necessary for the voltage multiplier in the RFID tag chip. The effect of the size of Schottky diode on the turn-on voltage and the input impedance at 900 MHz was investigated using small-signal equivalent model. Also, the effect or qualify factor of the diode on the input voltage to the tag chip is examined, which indicates that high qualify factor Schottky diode is desirable to minimize loss. The fabricated voltage multiplier resulted in a output voltage of more than 1.3 V for the input RF signal of 200mV, which is suitable for long-range RFID applications.

Development of Neutron, Gamma ray, X-ray Radiation Measurement and Integrated Control System (중성자, 감마선, 엑스선 방사선 측정 및 통합 제어 시스템 개발)

  • Ko, Tae-Young;Lee, Joo-Hyun;Lee, Seung-Ho
    • Journal of IKEEE
    • /
    • v.21 no.4
    • /
    • pp.408-411
    • /
    • 2017
  • In this paper, we propose an integrated control system that measures neutrons, gamma ray, and x-ray. The proposed system is able to monitor and control the data measured and analyzed on the remote or network, and can monitor and control the status of each part of the system remotely without remote control. The proposed system consists of a gamma ray/x-ray sensor part, a neutron sensor part, a main control embedded system part, a dedicated display device and GUI part, and a remote UI part. The gamma ray/x-ray sensor part measures gamma ray and x-ray of low level by using NaI(Tl) scintillation detector. The neutron sensor part measures neutrons using Proportional Counter Detector(low-level neutron) and Ion Chamber Type Detector(high-level neutron). The main control embedded system part detects radiation, samples it in seconds, and converts it into radiation dose for accumulated pulse and current values. The dedicated display device and the GUI part output the radiation measurement result and the converted radiation amount and radiation amount measurement value and provide the user with the control condition setting and the calibration function for the detection part. The remote UI unit collects and stores the measured values and transmits them to the remote monitoring system. In order to evaluate the performance of the proposed system, the measurement uncertainty of the neutron detector was measured to less than ${\pm}8.2%$ and the gamma ray and x-ray detector had the uncertainty of less than 7.5%. It was confirmed that the normal operation was not less than ${\pm}15$ percent of the international standard.

Data Envelopment Analysis of the Management Efficiency of National Shipping Enterprises in South Korea -Chiefly on the Corporate Entertainment and Advertisement Cost- (DEA모형을 이용한 국적선사의 경영효율성 분석 -접대비와 광고·선전비를 중심으로-)

  • Park, Hyun-Jun;Kim, Hyuna;Lim, Young-Tae
    • Journal of Korea Port Economic Association
    • /
    • v.32 no.2
    • /
    • pp.123-135
    • /
    • 2016
  • This study uses Data Envelopment Analysis(DEA) to investigate the management efficiency of Korean shipping companies based on business administration costs such as corporate entertainment, advertisement, and labor costs. We analyze shipping enterprises listed on the Korean stock market of the period of 2010-2014. Corporate entertainment, advertisement and labor costs are used as input variables and sales and net income are used as output variables. We use technical efficiency, pure technical efficiency, scale efficiency and returns to scale to propose a plan to improve the efficiency of inefficiency decision-making units (DMUs). The results of the efficiency analysis show that six of the DMUs in the technical efficiency of CCR model and eight of the DMUs in the pure technical efficiency of BCC model are in efficient state. In terms of return to scale, six of the DMUs(24% of all DMUs) show increasing returns to scale, while 13 DMUs(52% of all DMUs) showdecreasing returns to scale. Because multiple efficient state for DMUs exist in the technical efficiency analysis, we conduct a super efficiency analysis. The results show that the efficient state of the twomost efficient DMUs are 1.314 and 1.243, respectively. This implies that these DMUs could maintain their current levels of the efficiency if they increase the amount spent on advertisements, corporate entertainment and labor costs by 31.4% and 24.3%. respectively. We conclude this study by providing the efficiency states of each DMU and target for improving the inefficiencies in each case.

A Study on the Utilization and Control Method of Hybrid Switching Tap Based Automatic Voltage Regulator on Smart Grid (스마트그리드의 탭 전환 자동 전압 조정기의 다중 스위칭 제어 방법 및 활용 방안에 관한 연구)

  • Park, Gwang-Yun;Kim, Jung-Ryul;Kim, Byung-Gi
    • Journal of the Korea Society of Computer and Information
    • /
    • v.17 no.12
    • /
    • pp.31-39
    • /
    • 2012
  • In this paper, we propose a microprocessor-based automatic voltage regulator(AVR) to reduce consumers' electric energy consumption and to help controlling peak demanding power. Hybrid Switching Automatic Voltage Regulator (HS-AVR) consist of a toroidal core, several tap control switches, display and command control parts. The coil forms an autotransformer which has a serial main winding and four parallel auxiliary windings. It controls the output voltage by changing the combination of the coils and the switches. Relays are adopted as the link switches of the coils to minimize the loss. To make connecting and disconnecting time accurate, relays of the circuit have parallel TRIACs. A software phase locked loop(PLL) has been used to synchronize the timings of the switches to the voltage waveform. The software PLL informs the input voltage zero-crossing and positive/negative peak timing. The traditional voltage transformers and AVRs have a disadvantage of having a large mandatory capacity to accommodate maximum inrush current to avoid the switch contact damage. But we propose a suitable AVR for every purpose in smart grid with reduced size and increased efficiency.

Code for Unplanned Encounters at Sea(CUES): Its Limitation and Recommendations for Improvement (해상에서의 우발적 조우 시 신호 규칙(CUES)의 제한점과 개선을 위한 제언)

  • Oh, Dongkeon
    • Strategy21
    • /
    • s.44
    • /
    • pp.323-351
    • /
    • 2018
  • Adopted in Western Pacific Naval Symposium(WPNS) 2014, Code for Unplanned Encounters at Sea(CUES) has been the most valuable output of WPNS history. Written and suggested by Australian Navy in 1999, the goal of CUES is to decrease the possibility of the naval conflict by establishing the code among international navies in the Western Pacific region. Facing many oppositions and requirement of People's Liberation Army Navy(PLAN) in WPNS 2012 and 2013, but it finally adopted in WPNS 2014, with many changes in detailed provisions. From then, navies in the Western Pacific region have followed CUES to prevent maritime conflicts in the region, CUES, however, sometimes does not work correctly. Contents of CUES is the mixture of the parts of Multinational Maritime Tactical Signal and Maneuvering Book(MTP) and International Regulations for Preventing Collision at Sea 1972(CORLEGs). There are means of radio communications such as frequency and signals, instructions for maneuvering and so on. Thus, it is not a new document for the U.S. Navy and its allies, but it requires training to implicate at sea for navies other than U.S. allies, like PLAN. Lots of provisions in CUES were changed because of the opposition of PLAN, and CUES has many shortcomings and practical limitations. First, since CUES is non-legally binding, and there are no methods to force the naval assets on the sea to follow. Second, CUES is only applied to naval assets; naval ships - warships, naval auxiliaries, and submarines - and naval aircraft. Third, the geographical scope in CUES is not clear. Fourth, there is no provision for submerged submarines. Finally, CUES has no time-based framework or roadmap for training. In this regard, there would be six recommendations for improvement. First, CUES should be reviewed by WPNS or other international institutions, while keeping non-binding status so that WPNS could send signals to the navies which do not answer CUES on the sea. Second, the participation of Maritime Law Enforcements(MLEs) such as coast guard is inevitable. Third, navies would use full text of MTP rather than current CUES, which extracts some parts of MTP. Fourth, CUES needs provisions with respect to submerged submarines, which recognizes as offensive weapons themselves. Fifth, the geographic scope of CUES should be clear. Since there are some countries in which claim that a rock with a concrete structure is their territory, CUES should be applied on every sea including EEZ and territorial seas. Finally, the detailed training plan is required to implicate CUES at sea. Rim of the Pacific (RIMPAC) is a good exercise to train CUES, because almost all WPNS member countries except six countries are participating in RIMPAC. CUES is a meaningful document not only for navies but also for nation-states in the region. To prevent escalation of conflict in the region, potentially caused by an unplanned collision at sea, CUES should be applied more strictly. CUES will continue to be in subsequent WPNS and therefore continue to improve in the effectiveness as both an operational and diplomatic agreement.

A Method for Migrating Object-Oriented Systems into SOA Services (객체지향 시스템에서 SOA서비스로의 전이 기법)

  • Kim, Ji-Won;La, Hyun-Jung;Kim, Soo-Dong
    • The KIPS Transactions:PartD
    • /
    • v.17D no.1
    • /
    • pp.25-40
    • /
    • 2010
  • Service-Oriented Architecture (SOA) is a development paradigm for reusing services as an independent reuse unit. A service delivers a cohesive functionality through its external interface. Since services have unique characteristics which are not typically presented in conventional development approaches, there is a demand for effective approaches to developing services. Most of the current SOA methodologies presenta process where services are designed and developed from the requirements rather than reusing existing assets, which demands high cost and effort. Hence, a desirable approach is to be able to develop services by migrating from their existing legacy systems such as object-oriented system. A difficulty in this migration is that objects in object-oriented systems reveal characteristics which differ considerably from those of services. That is, objects are designed without considering commonalities among several consumers. In this paper, we first define mapping relationships between key artifacts in object-oriented system and those in SOA services. By these relationships and considering commonalities among several applications in a domain, we propose three systematic methods to migrate from object-oriented system to SOA services. Each method consists of a list of input and output artifacts and detailed guidelines which are performed in order. Through these methods, service developers can easily develop services with less effort.

High Resolution Gyeonggi-do Agrometeorology Information Analysis System based on the Observational Data using Local Analysis and Prediction System (LAPS) (LAPS와 관측자료를 이용한 고해상도 경기도 농업기상정보 분석시스템)

  • Chun, Ji-Min;Kim, Kyu-Rang;Lee, Seon-Yong;Kang, Wee-Soo;Park, Jong-Sun;Yi, Chae-Yon;Choi, Young-Jean;Park, Eun-Woo;Hong, Sun-Sung
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.14 no.2
    • /
    • pp.53-62
    • /
    • 2012
  • Demand for high resolution weather data grows in the agriculture and forestry fields. Local Analysis and Prediction System (LAPS) can be used to analyze the local weather at high spatial and temporal resolution, utilizing the data from various sources including numerical weather prediction models, wind or temperature profilers, Automated Weather Station (AWS) networks, radars, and satellites. LAPS has been set to analyze weather elements such as air temperature, relative humidity, wind speed, and wind direction every hour at the spatial resolution of $100m{\times}100m$ for Gyeonggi-do on near real-time basis. The AWS data were revised by adding the agricultural field AWS data (33 stations) in addition to the KMA data. The analysis periods were from 1 to 31 August 2009 and from 15 to 21 February 2010. The comparison of the LAPS output showed the smaller errors when using the agricultural AWS observation data together with the KMA data as its input data than using only either the agricultural or KMA AWS data. The accuracy of the current system needs improvement by further optimization of analyzing options of the system. However, the system is highly applicable to various fields in agriculture and forestry because it can provide site specific data with reasonable time intervals.

Design of a On-chip LDO regulator with enhanced transient response characteristics by parallel error amplifiers (병렬 오차 증폭기 구조를 이용하여 과도응답특성을 개선한 On-chip LDO 레귤레이터 설계)

  • Son, Hyun-Sik;Lee, Min-Ji;Kim, Nam Tae;Song, Han-Jung
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.16 no.9
    • /
    • pp.6247-6253
    • /
    • 2015
  • This paper presents the transient-response improved LDO regulator based on parallel error amplifiers. The proposed LDO regulator consists of an error amplifier (E/A1) which has a high gain and narrow bandwidth and a second amplifier (E/A2) which has low gain and wide bandwidth. These amplifiers are in parallel structure. Also, to improve the transient-response properties and slew-rate, some circuit block is added. Using pole-splitting technique, an external capacitor is reduced in a small on-chip size which is suitable for mobile devices. The proposed LDO has been designed and simulated using a Megna/Hynix $0.18{\mu}m$ CMOS parameters. Chip layout size is $500{\mu}m{\times}150{\mu}m$. Simulation results show 2.5 V output voltage and 100 mA load current in an input condition of 2.7 V ~ 3.3 V. Regulation Characteristic presents voltage variation of 26.1 mV and settling time of 510 ns from 100mA to 0 mA. Also, the proposed circuit has been shown voltage variation of 42.8 mV and settling time of 408 ns from 0 mA to 100 mA.

A study on the Optimal Configuration Algorithm for Modeling and Improving the Performance of PV module (태양광모듈의 모델링 및 성능향상을 위한 최적구성방안에 관한 연구)

  • Jeong, Jong-Yun;Choi, Sung-Sik;Choi, Hong-Yeol;Ryu, Sang-Won;Lee, In-Cheol;Rho, Dae-Seok
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.5
    • /
    • pp.723-730
    • /
    • 2016
  • Solar cells in a PV module are connected in series and parallel to produce a higher voltage and current. The PV module has performance characteristics depending on solar radiation and temperature. In addition, the PV system causes power loss by special situations, including the shadows of the surrounding environment, such as nearby buildings and trees. In other words, an increase in power loss and a decrease in life cycle can occur because of the partial shadow and hot-spot effect. Therefore, this paper proposes the optimal configuration algorithm of a bypass diode to improve the output of a PV module and one of a PV array to minimize the loss of the PV array. In addition, this paper presents a model of a PV module and PV array based on the PSIM S/W. The simulation results confirmed that the proposed optimal configuration algorithms are useful tools for improving the performance of PV system.

The Development of a beam profile monitoring system for improving the beam output characteristics (빔 출력 특성 개선을 위한 빔 프로파일 모니터링 시스템 개발)

  • An, Young-jun;Hur, Min-goo;Yang, Seung-dae;Shin, Dae-seob;Lee, Dong-hoon
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.19 no.11
    • /
    • pp.2689-2696
    • /
    • 2015
  • Radioactive isotopes which are manufactured using a cyclotron in a radioisotope used for radiation diagnosis is affected by the production yield according to size and shape of the beam and beam uniform degree from irradiated location when the proton beam investigated the target by cyclotron. Therefore, in this paper developed the BPM(Beam Profile Monitor) device capable of measuring the beam cross-section at the cyclotron beam line. It was configured so as to be able to remote control the BPM device in LabView and used the BPM program it was to be able to easily monitor and display to analyze the graph of two-dimensional graph and a three-dimensional beam distribution numerical information of the beam obtained while scanning the tungsten wire to the X and Y axis. The time it takes to measure the beam can be confirmed 37seconds when step motor driving speed was 2000pps. Through a beam readjusted based on the measured beam distribution information by optimizing the beam distribution it can be made to maximize the RI production yield and contribute supply stabilization.