• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.235-240
• /
• 2011

Small hydropower resources for five major river systems have been studied. The model, which can predict flow duration characteristic of stream, was developed to analyze the variation of inflow caused from rainfall condition. And another model to predict hydrologic performance for small hydropower(SHP) plants is established. Monthly inflow data measured at Andong dam were analyzed. The predicted results from the developed models in this study showed that the data were in good agreement with measured results of long term inflow at Andong darn. It was found that the models developed in this study can be used to predict the available potential and technical potential of SHP sites effectively. Based on the models developed in this study, the hydrologic performance for small hydropower sites located in river systems have been analyzed. The results show that the hydrologic performance characteristics of SHP sites have some difference between the river systems. Especially, the specific design flowrate and specific output of SHP sites located on North Han river and Nakdong river systems have large difference compared with other river systems.

• 한국철도학회논문집
• /
• 제13권3호
• /
• pp.278-282
• /
• 2010

자기부상열차의 급전변전소는 공급되는 전력의 주파수 변화에 필요한 인버터를 포함하고 있어, 다른 철도 급전 시스템과는 차별되는 특성을 가지고 있으며, 이에 대한 급전시스템을 구성하고 있는 설비의 정격과 기본적인 모델을 구축하는 연구가 진행 중에 있다. 본 논문에서는 독일의 TR-07 급전 시스템과 중국 상하이 자기부상열차의 인버터 모델을 참고하여, 3레벨 인버터를 이용한 자기부상열차의 급전변전소를 모델링하고 과도현상 분석에 많이 이용되고 있는 프로그램인 PSCAD/EMTDC를 이용하여 그 출력 특성을 살펴보았다. 또한 자기부상열차 시스템 부하에 공급하려는 출력을 위한 인버터 제어 방법을 기술하고, 인버터의 기준파 주파수와 진폭 변조비를 변화시킴에 따라 그 출력이 어떻게 변화하는지 나타내었다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.315-318
• /
• 2008

In this paper proposed the solar tracking system to use a fuzzy control order to increase an output of the PV(Photovoltaic) array. The solar tracking system operated two DC motors driving by signal of photo sensor. The control of dual axes is not an easy task due to nonlinear dynamics and unavailability of the parameters. Recently, artificial intelligent control of the fuzzy control, neural-network and genetic algorithm etc. have been studied. The fuzzy control made a nonlinear dynamics to well perform and had a robust and highly efficient characteristic about a parameter variable as well as a nonlinear characteristic. Hence the fuzzy control was used to perform the tracking system after comparing with error values of setting-up, nonlinear altitude and azimuth. In this paper designed a fuzzy controller for improving output of PV array and evaluated comparison with efficient of conventional PI controller. The data which were obtained by experiment were able to show a validity of the proposed controller.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.246-250
• /
• 2009

String & tabbing step in the crystalline PV module manufacturing process for the temperature directly affects solar cells. In fact, in the manufacture of PV modules tend to be temperature factor and the corresponding changes n the output shows the same characteristics. In this journal, it will be considered about thermal characteristics, especially changes of characteristic in high temperature of the solar cell through experiment that we measure electric output characteristics of solar cells after those are applied with high temperature changes for two seconds. And we can think about the possibility of efficiency improvements over looks in PV module manufacturing processes.

• 전기학회논문지
• /
• 제63권10호
• /
• pp.1467-1472
• /
• 2014

This paper study on powering characteristic on speed variation of propulsion system of prototype 8200 electric locomotive propulsion system through simulation modeling. For this purpose, it being applied in the field of railway IGBT (Insulated Gate Bipolar Transistor) elements are used. Converter was performed PLL (Phase-Locked Loop) control method that is used to control the phase and output voltage, and the inverter was carried an indirect vector control method to control the speed of traction motor. The results of simulation by modeling and experimental unit, we was confirmed that converter is controlled a unity power factor and output voltage by reference voltage. Also traction motor was controlled by indirect vector control and SVPWM inverter switching method very well.

• 조명전기설비학회논문지
• /
• 제18권6호
• /
• pp.84-90
• /
• 2004

제어계에서 제어성능을 개선시키기 위해서 많은 제어기법들이 제안되어왔다. 궤환제어계에서 일반적으로 제어기의 출력이 제어대상의 입력으로 사용된다. 그러나 불필요한 잡음이 제어기의 출력에 포함된다. 그러므로 이러한 잡음을 제거하고 계의 응답특성을 개선시키기 위해서 전치보상기를 사용할 필요가 있다. 본 논문에서는 모델추종제어를 위한 전치보상기의 설계법을 I-PD 제어계에서 제안하였다. 제안한 전치보상기를 신경망으로 구현하였고, 계의 응답특성이 어떤 조건하에서 변할 때 원하는 응답이 되도록 전치보상기의 이득이 자동적으로 조정되도록 하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 추계학술대회 논문집
• /
• pp.199-201
• /
• 2008

In this paper proposed the solar tracking system to use direct fuzzy control order to increase an output of the PV (Photovoltaic) array. The solar tracking system operated two DC motors driving by signal of photo sensor. The control of dual axes is not an easy task due to nonlinear dynamics and unavailability of the parameters. Recently, artificial intelligent control of the fuzzy control, neural-network and genetic algorithm etc. have been studied. The fuzzy control made a nonlinear dynamics to well perform and had a robust and highly efficient characteristic about a parameter variable as well as a nonlinear characteristic. Hence the fuzzy control was used to perform the tracking system after comparing with error values of setting-up, nonlinear altitude and azimuth. In this paper designed a DFC(Direct Fuzzy Control)controller for improving output of PV array and evaluated comparison with efficient of conventional PI controller. The data which were obtained by experiment were able to show a validity of the proposed controller.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.847-851
• /
• 2000

In this study, contour-vibration-mode Pb($Ni_{1/2}$,$W_{1/2}$)$O_3$-Pb(Zr,Ti)$O_3$ piezoelectric transformers for driving a 28W(T5) fluorescent lamp were fabricated to the modified filter structure with ring and dot electrodes which has been developed for application in 455kHz AM radios. The piezoelectric transformers were fabricated to the size of $31.5$\times$31.5$\times$2.5$mm^3$ with the variations of ring/dot electrode area ratio. Driving of piezoelectric transformer was carried out with input region for the ring electrode and output region for the dot electrode. The electrical properties and characteristic temperature rises caused by the vibration were measured at various load resistances. A 28 W fluorescent lamp, T5, was successfully driven by the fabricated transformer. The transformer with ring/dot electrode area ratio of 1.83 exhibited the best properties in terms of output power, efficiency and characteristic temperature rise, 30.95 W, 97.57% and8.3$^{\circ}C$ respectively.

• Wind and Structures
• /
• 제32권2호
• /
• pp.81-87
• /
• 2021

The aim of the current study is to compare the performance of large 2 MW and 3 MW wind turbines operating on existing onshore wind farms using Blade Element Momentum (BEM) theory and Angular Momentum (AM) theory and illustrate the performance characteristic curves of the turbines as a function of wind speed (U∞). To achieve this, the measurement data obtained from two different Wind Energy Power Plants (WEPPs) located in the Hatay region of Turkey was used. Two different horizontal-axis wind turbines with capacities of 2 MW and 3 MW were selected for evaluation and comparison. The hub-height wind speed (UD), turbine power output (P), atmospheric air temperature (Tatm) and turbine rotational speed (Ω) data were used in the evaluation of the turbine performance characteristics. Curves of turbine power output (P), axial flow induction factor (a), turbine rotational speed (Ω), turbine power coefficient (CP), blade tip speed ratio (λ), thrust force coefficient (CT) and thrust force (T) as a function of U∞ were obtained for the 2 MW and 3 MW wind turbines and these characteristic curves were compared. Results revealed that, for the same wind speed conditions, the higher-capacity wind turbine (3 MW) was operating at higher turbine power coefficient rates, while rotating at lower rotational speed ratios than the lower-capacity wind turbine (2 MW).

• 한국정보통신학회논문지
• /
• 제20권2호
• /
• pp.253-259
• /
• 2016

본 논문은 $1:{\infty}$ 또는 ${\infty}:1$의 전력 분배 비율을 가지는 가변 전력 분배기 회로를 제안하였다. 제안된 가변 전력 분배기 회로는 안정된 입력 정합 특성을 가지며 입력 신호를 두 개의 경로로 분배하는 브랜치라인 커플러, 브랜치라인 커플러의 두 출력에 연결되어 90도 위상 변화량을 가지는 두 개의 가변 위상 변환기, 가변 위상 변환기를 거친 두 신호를 결합하는 링-하이브리드 커플러로 구성된다. 제안된 가변 전력 분배기 회로는 가변 위상 변환기에서 90도 위상 변화에 따라 가변 전력 분배기의 두 출력 단자의 출력 전력 비율을 원하는 값으로 설정할 수 있다. 제안된 가변 분배기 회로는 2GHz에서 Taconic사의 RF-35 20mil을 이용하여 제작하였다. 제작된 가변 전력 분배기 회로는 1.9-2.1 GHz 주파수 대역에서 두 개의 출력 단자에 1:1000에서 5000000:1의 전력 분배 비율의 변화가 가능하였다. 또한, 제작된 가변 전력 분배기는 전력 분배 비율에 관계없이 입력 반사계수 -20 dB 이하, 전력 손실 약 -1.0 dB, 두 출력 단자의 격리 특성 -17 dB 이하의 안정적인 특성을 보였다.