• 한국기계연구소 소보
• /
• 통권18호
• /
• pp.125-129
• /
• 1988

This paper proposes a sensitivity technique for analysis of the relationships between input variables (known values) and output variables(unknown values), These design variables are constrained by design equations. Thus, the output variables can be calculated by solving the equations with eliminating the input variables from the equations because the input variables become constants. If the output variables are not satisfied, the values of the input variables must be adjusted by increasing or decreasing the values and then the problem must be solved again. This is called as the iterative design procedure. The sensitivity technique, presented in this paper, gives the sensitivity on the changes of the values of the output variables to the input variables.

• 산업공학
• /
• 제12권4호
• /
• pp.551-556
• /
• 1999

In this paper, we compare the performance of three data mining classification algorithms(neural network, decision tree, logistic regression) in consideration of various characteristics of categorical input and output data. $2^{4-1}$. 3 fractional factorial design is used to simulate the comparison situation where factors used are (1) the categorical ratio of input variables, (2) the complexity of functional relationship between the output and input variables, (3) the size of randomness in the relationship, (4) the categorical ratio of an output variable, and (5) the classification algorithm. Experimental study results indicate the following: decision tree performs better than the others when the relationship between output and input variables is simple while logistic regression is better when the other way is around; and neural network appears a better choice than the others when the randomness in the relationship is relatively large. We also use Taguchi design to improve the practicality of our study results by letting the relationship between the output and input variables as a noise factor. As a result, the classification accuracy of neural network and decision tree turns out to be higher than that of logistic regression, when the categorical proportion of the output variable is even.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.157-157
• /
• 2000

In the fuzzy control for the multi-variable system, it is difficult to obtain the fuzzy rule. Therefore, the parallel structure of the independent single input-single output fuzzy controller using a pairing between the input and output variable is applied to the multi-variable system. The concept of relative gain matrix is used to obtain the input-output pairs. However, among the input/output variables which are not paired the interactive effects should be taken into account. these mutual coupling of variables affect the control performance. Therefore, for the control system with a strong coupling property, the control performance is sometimes lowered. In this paper, the effect of mutual coupling of variables is considered by tile introduction of a simple compensator. This compensator adjusts the degree of coupling between variables using a neural network. In this proposed neuro-fuzzy controller, the Neural network which is realized by back-propagation algorithm, adjusts the mutual coupling weight between variables.

• Journal of Electrical Engineering and Technology
• /
• 제6권3호
• /
• pp.423-430
• /
• 2011

Multi-input multi-output (MIMO) dynamic matrix control (DMC) technique is applied to control steam temperatures in a large-scale ultrasupercritical once-through boiler-turbine system. Specifically, four output variables (i.e., outlet temperatures of platen superheater, finish superheater, primary reheater, and finish reheater) are controlled using four input variables (i.e., two spray valves, bypass valve, and damper). The step-response matrix for the MIMO DMC is constructed using the four input and the four output variables. Online optimization is performed for the MIMO DMC using the model predictive control technique. The MIMO DMC controller is implemented in a full-scope power plant simulator with satisfactory performance.

• 대한전기학회논문지
• /
• 제40권7호
• /
• pp.706-717
• /
• 1991

In order to remove the assumption of full state availability which is one of the major difficulties with the practical realization of variable structure control systems,a new switching function with a dynamic structure is proposed. And the control performances of the output feedback variable structure control systems with the dynamic switching function are evaluated through simulation studies. The proposed dynamic switching function is driven by small number of measured output and input variables while conventional static switching function requires full state information. Therefore, the proposition of the dynamic swiching function makes practical implementation of output feedback variable structure control scheme possible for the systems with unmeasurable state variables, high order systems and large scale systems that the conventional variable structure control schemes with static switching function cannot be applied. In the variable structure control systems with the dynamic switching function, desired control performance can be guaranteed by proper choice of design parameters such as poles of switching function dynamic equation and switching control gains even though small number of measured output and input variables are provided as shown in simulation resuls.

• 한국건설관리학회논문집
• /
• 제13권5호
• /
• pp.94-102
• /
• 2012

최근 글로벌 금융위기, 미분양 주택의 증가 등으로 인해 건설기업의 효율성 분석이 요구되고 있다. 기업에 대한 효율성 분석시 가장 중요한 것은 효율성 측정에 사용된 투입-산출변수이다. 하지만 건설기업의 효율성 분석에 중요한 영향을 미치는 핵심적인 투입-산출변수를 추출하기 위한 체계적인 연구는 미흡하였다. 따라서 본 연구에서는 건설기업의 효율성 분석을 위한 핵심 투입-산출변수를 추출을 위해 투입-산출변수 별로 모든 조합을 제시한 모형을 제시하고 DEA모형과 PCA분석을 통하여 건설기업의 효율성을 분석에 중요한 요소인 투입-산출변수를 추출하고자 한다. 본 연구를 위해 기존 연구 및 이론적 고찰을 하고, 효율성 측정을 위한 변수 및 21개 모형을 설정하였다. 다음으로 효율성 및 PCA분석을 하고 결과를 도출하였다. 연구 결과, 핵심적인 투입 및 산출변수는 2006년의 경우 투입변수는 종업원수, 산출변수는 매출액, 2008년의 경우 투입변수는 자본금, 산출변수는 당기순이익, 2010년의 경우 투입변수는 고정자산, 산출변수는 매출액으로 나타났다. 건설기업 효율성 결과에 중요한 영향을 주는 변수 추출을 통해 개별 건설기업들이 효율성을 향상하기 위한 중점전략을 마련할 수 있을 것으로 판단된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.93.3-93
• /
• 2001

We propose the cascade PID type fuzzy control method for a good performance such as robustness. The one of proposed method, the first stage have two input variables of an error and a derivative error, and one output variable, and the next stage have two input variables of the output of first stage and an integral error, and one output variable, have two stages. The other, the first stage has one input of an error, and one output variable, and the second stage have two input of the output of first stage and a derivative error, and one output variable, and the third stage have two input of the output of the second stage and an integer error, and one output variable ...

• 품질경영학회지
• /
• 제39권2호
• /
• pp.244-255
• /
• 2011

In this study, we try to evaluate the efficiency of the photonics industry using a data envelopment analysis(DEA) model. We first develope four stage procedures for selecting proper input and output variables which consist of selecting the first candidate variables from literature survey, selecting the second candidate variables through experts' discussion, measuring the partial efficiency of the selected variables based on Tofallis' profiling, and clustering some variables through the rank correlation analysis of partial efficiency proposed by Min and Kim(l998). With this procedure, we select 4 input variables(capital, number of employee, R&D cost, operating cost) and 2 output variables(sales, growth of sales) and then utilize CCR and BCC model to measure efficiencies of 26 photonics companies in Gwangju. Moreover, we perform the reference group analysis to figure out what causes inefficiencies and to provide the desirable values for input and output variables at which inefficient photonics companies become efficient. Finally, we classify 26 photonics companies into three groups such as optical communications, optical applications, and optical sources, and perform the Kruskal-Wallis test to check if there exist some differences between efficiencies of three groups.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.271-271
• /
• 2000

This paper considers guaranteed cost output feedback controller for the uncertain time-varying delay systems with delays in state and control input. The uncertainty in the system is assumed to be norm-bounded and time-varying. The sufficient condition for the existence of controller and the guaranteed cost output feedback controller design method are presented. Also, using some changes of variables and Schur complements, the obtained sufficient condition can be reformulated as LMI forms in terms of transformed variables. Using the obtained LMI variables, we derive guaranteed cost controller gain and guaranteed cost.

• 대한산업공학회지
• /
• 제40권1호
• /
• pp.84-99
• /
• 2014

In this study, determinant input-output variables are identified for calculating Data Envelopment Analysis (DEA) efficiency scores relating to evaluating the efficiency of government-sponsored research and development (R&D) projects. In particular, this study proposes a systematic framework of design and analysis of experiments, called "all possible DEAs", for pinpointing DEA determinant input-output variables. In addition to correlation analyses, two modified measures of time series analysis are developed in order to check the similarities between a DEA complete data structure (CDS) versus the rest of incomplete data structures (IDSs). In this empirical analysis, a few DEA determinant input-output variables are found to be associated with a typical public R&D performance evaluation logic model, especially oriented to a mid- and long-term performance perspective. Among four variables, only two determinants are identified : "R&D manpower" ($x_2$) and "Sales revenue" ($y_1$). However, it should be pointed out that the input variable "R&D funds" ($x_1$) is insignificant for calculating DEA efficiency score even if it is a critical input for measuring efficiency of a government-sonsored R&D project from a practical point of view a priori. In this context, if practitioners' top priority is to see the efficiency between "R&D funds" ($x_1$) and "Sales revenue" ($y_1$), the DEA efficiency score cannot properly meet their expectations. Therefore, meticulous attention is required when using the DEA application for public R&D performance evaluation, considering that discrepancies can occur between practitioners' expectations and DEA efficiency scores.