• 새물리
• /
• 제68권11호
• /
• pp.1215-1224
• /
• 2018

Most solar photovoltaic (PV) modules frequently get shadowed, completely or partially, resulting in a reduction of PV generation. This paper presents and compares the results from simulations and experimental measurements of the power output from a single PV module under various shading conditions. The study was carried out with a 90 W PV module and a 250 W PV module. The shaded area was increased from 0 to 100% for both variable and constant irradiances to analyze the effect of fluctuations in the solar irradiance certain shading conditions. The effect of shading for irradiance levels from 100 to $900W/m^2$ was investigated. Results showed that for every $100W/m^2$ decrease in the solar irradiance level, the power output decreased by 9, 0.7 and 1.5 W at 0, 25 and 50% shading, respectively. For solar irradiance levels higher than $500W/m^2$, the temperature increased by 1.6, 2.7 and $1.1^{\circ}C$ at 0, 25 and 50% shading, respectively, for every $100W/m^2$ increase in the irradiance.

• 디지털콘텐츠학회 논문지
• /
• 제19권7호
• /
• pp.1281-1287
• /
• 2018

이 연구에서는 중도중복장애아동을 위한 보완대체 의사소통(AAC) 앱의 모듈별 세부적 요소와 기능을 도출하고 이에 해당하는 인터페이스를 설계하였다. 연구 결과, 화면구성, 의사소통 판 편집, 시청각출력, 스위치&스캐닝 모듈별 세부 프로그램 구성은 다음과 같다. 화면구성 모듈은 의사소통 범주, 철자판, 즐겨찾기, 화면잠금, 설정 기능으로 구성된다. 의사소통 판 편집 모듈에서는 의사소통 범주, 상징, 즐겨찾기 편집 기능이 포함된다. 시청각적 출력 모듈은 청각적 출력의 형태로 음성의 높낮이, 강도, 속도, 음색을 개인별로 조정하는 기능을 제공한다. 시각적 출력의 형태에서는 칸의 배경색과 크기, 테두리 색과 두께를 조정한다. 스위치&스캐닝 모듈에서는 칸이 청각적, 시각적으로 표시되었을 때 스위치를 누름으로써 선택(클릭)이 이루어지는 기능을 제공한다. 향후 이 연구에서 제시한 프로그램을 실제로 구현한 AAC 앱의 개발이 필요하다.

• 환경영향평가
• /
• 제26권3호
• /
• pp.195-206
• /
• 2017

최근 도시물순환 회복을 위한 저영향개발(LID) 기법 적용에 대한 관심이 증가함에 따라, LID 계획 설계 및 시공, 유지관리 등에 활용할 수 있는 건축정보모델(BIM)에 대한 관심이 증가하고 있다. 이에 따라 본 논문에서는 LID 기법의 계획 및 설계공정 단계에서 BIM의 적용가능성과 활용방안을 검토하고자 2D기반의 설계도서를 통해 산출된 LID 시설물의 물량과 BIM 모델링에서 산출된 LID 시설물의 물량을 자동으로 비교하는 모듈을 개발하여 2D기반 산출물량과 비교검토하였다. BIM 기반 LID 시설물량 자동검토 모듈을 개발하기 위해서 연구대상지를 선정하고, BIM 모델링을 통해 물량산출표를 추출하였다. 추출된 물량산출표를 2D 기반의 물량산출표와 비교하기 위한 알고리듬을 작성하고, 작성된 알고리듬을 프로그램화해 산출된 물량의 비교 검토를 실시하였다. 대상지에 적용된 LID 시설물의 모델링을 완료하고, LID 시설물량 자동검토 모듈을 이용해 2D 기반 설계도서의 물량산출표와 BIM기반 물량산출표의 비교 검토를 실시하여, 좀 더 정확한 물량산출을 진행하였다. 또한 산출된 결과 중 재료의 물량 오차율이 ${\pm}30%$를 벗어나는 시설물들의 오차발생 원인을 분석하여 LID 시설물량 자동검토 모듈의 정확도를 검토하였다. LID 시설물량 자동검토 모듈을 통해, 설계도서를 기반으로 한 물량 산출과정에서 발생할 수 있는 오류들을 조기에 발견하고 수정할 수 있을 것으로 보이며, BIM 기반 LID 시설물 종합 관리 시스템 구축의 기반을 마련할 수 있을 것으로 판단된다.

• 한국태양에너지학회 논문집
• /
• 제39권5호
• /
• pp.1-10
• /
• 2019

Recently, the installation capacity of PV (photovoltaic) systems has been increasing not only field installation but also floating PV, farm land, BIPV/BAPV. For this reason, the new design and materials of PV module are needed. In particular, in order to apply a PV system to a building, lightweight of the PV module is essential. PV modules made of generally used texturing glass are excellent in output and reliability, but there is a limit to the weight that can be reduced. For the lightweight of the PV module, it necessary to use a film instead of a glass. However, the application of film rather than a glass may cause various problems such as decrease in photocurrent by decrease in transmittance and a increase of CTM (cell to module) loss, a degradation of the reliability, and so on. In this paper, PV modules using Ultra barrier film, which is recently a lot of interest as a substitute for a glass, its characteristic analysis and reliability test were conducted. The transmittance and UV characteristics of each material were verified, and the output of the fabricated 1 cell PV module was measured. In addition, 24 cell PV modules were fabricated at the lab-scale and its reliability tests were conducted. As a result of the experiment, the reliability characteristics of the ultra barrier film PV module were excellent, and it was confirmed that it could be used as the front material of the PV module instead of glass

• 대한전자공학회논문지TC
• /
• 제46권12호
• /
• pp.14-21
• /
• 2009

본 논문에서는 7개의 MMIC 전력증폭기 칩과 박막기판을 결합하여 MIC 모듈을 구성함으로써 Ka-대역 중심주파수 영역에서 10 W 이상의 출력전력을 가지는 펄스모드 전력증폭기 모듈을 설계하고 제작하였다. 전력증폭기 모듈의 제작에는 밀리미터파 대역에 적합한 수정된 형태의 윌킨슨 전력분배기/합성기와 모듈의 조림과정에서 공진을 억제하고 작은 삽입손실 특성을 보이는 CBFGCPW-Microstrip 천이구조를 활용하였다. 전력용 MMIC 바이어스 회로에 사용된 큰 값의 바이패스 캐패시터에 의해 발생되는 펄스모드 출력전력의 감소를 개선하고자 TTL 펄스 타이밍 제어 기법을 제안하였다. 제안된 방법을 10 kHz, $5\;{\mu}sec$ 펄스모드로 동작하는 전력증폭기 모듈에 적용한 결과 펄스모드 동작시간을 200 nsec 이상 개선할 수 있었고 0.62 W의 출력전력을 향상시킬 수 있었다. 구현된 전력증폭기 모듈은 59.5 dB의 전력이득과 11.89 W의 출력전력을 보여주었다.

• 소성∙가공
• /
• 제12권2호
• /
• pp.110-115
• /
• 2003

This paper is concerned with the compression test and forming process of flange by using virtual reality and analysis(simulation) program. This virtual manufacturing can be carried out one personal computer without any expensive devices for experiment. The virtual manufacturing composed of three modules such as the imput, calculation and the output modules on internet. Internet user can give the material's property and process parameters to the sever computer at the input module. On the calculation module, a simulator computes the virtual manufacturing process by analysis program and stores the data as a file. The output module is the program in which internet user can confirm virtual manufacturing results by showing tables, graphs, and 3D animation. This programs is designed by an internet language such as HTML, CGI, VRML and JAVA ,while analysis programs use the finite increasing, the virtual manufacturing technique will substitute many real experiments in the future.

• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.225-228
• /
• 2016

KRISS-V, a V-band millimeter-wave source module for a primary RF power standard and calibration system developed by the Korea Research Institute of Standards and Science is here presented. The output power of KRISS-V is several times higher than that of commercial amplifier/multiplier chains and is highly stable (the standard deviations of output power are less than 0.01% in the worst case). The spectral purity of KRISS-V is high enough to consider it a single-tone signal generator. We also added programmable attenuation capability to KRISS-V for remote power control. Moreover, the in-house source module is cost-effective and adaptable to various measurement schemes. The structure of the model as well as detailed component information are introduced so that it can be reproduced.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.183-185
• /
• 2009

In this thesis, output voltage, current and power of solar module were classified by irradiation and module temperature from data of overall operating characteristics collected for one year in order to manage efficient photovoltaic generation system and deliver maximum power. In addition, from these data, correlations between irradiation, module temperature of photovoltaic cell and amount of power given by photovoltaic cell was quantitatively examined to deduce optimization of the design and construction of photovoltaic generation system. The results of this thesis can be summarized as follows. As I-Y characteristics according to a temperature range of 10$\sim$50[], the area of I-V characteristics were increased with an increase in temperature. Since this area corresponds to the power, output power is thought to have increased with temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.180-182
• /
• 2009

In this thesis, output voltage, current and power of solar module were classified by irradiation and module temperature from data of overall operating characteristics collected for one year in order to manage efficient photovoltaic generation system and deliver maximum power. In addition, from these data, correlations between irradiation, module temperature of photovoltaic cell and amount of power given by photovoltaic cell was Quantitatively examined to deduce optimization of the design and construction of photovoltaic generation system. The results of this thesis can be summarized as follows. As I-V characteristics according to a irradiation range of 100$\sim$900 $[W/m^2]$, voltage and current were increased with an increase in irradiation. The result is thought of as an increase in output power with increasing irradiation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1120-1121
• /
• 2008

This paper is proposed cooling system of BIPV(Building Integrated Photovoltaic) by micro-controller. The output power of PV generation system is not systematically tracked and influenced by various factors; solar irradiance, solar cell temperature. The temperature of solar module should be minimized to increase electrical output. Therefore, it is proposed that micro-controller cools to decrease temperature of solar module using thermoelement. The validity of this paper is proved by comparing solar module temperature of cooling system and un-cooling system.