• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.359-369
• /
• 2021

In underwater communications, to compensate performance degradation induced from rapidly changing channel transfer characteristic, multi-band communication method which allocate the same data to different frequency bands is used. However, the multi-band configuration may have worse performance than the single-band one because performance degradation in a particular band affects the output from the entire bands. This problem can be solved through a receiving end that analyzes error rates of each band, sets threshold values and allocates lower weights to inferior bands. Therefore, this paper proposed a weighting algorithm based on estimated Bit Error Rate (BER) which analyzes reliability of received data based on the performance difference between demodulated and decoded data. Employing turbo codes with coding rate of 1/3, we evaluate the performance of the proposed weighted multi-band transmission model in real underwater environments based on optimal simulation parameters. Through the sea trial experiment, we confirmed error performance was improved by applying the proposed weighting algorithm.

• International Area Studies Review
• /
• v.22 no.4
• /
• pp.19-35
• /
• 2018

This paper is to estimate the total factor productivity(TFP) in the Korean manufacturing and service industries during the period 1975:1-2016:4 using the stochastic frontier analysis model. In order to analyze the determinants for the total factor productivity the paper estimates the industry-specific determinant elasticities of TFP using the autoregressive distributed model. The industry-specific determinants, which reflect the industrial structure and properties include markup, the ratio of capital to labor(KL), and the ratio of foreign intermediate goods (FIG) to industrial output. The average value for total factor productivity growth was estimated to be 0.0199 in manufacturing and 0.0063 in the service industry. The markup and KL elasticities of TFP were estimated to be 2.481 and 0.651 in manufacturing respectively and -1.403 and 0.042 in the service industry respectively. The empirical results suggest that the industrial markup and the ratio of capital to labor have had decisive effects on the changes in the total factor productivity in the Korean manufacturing and service industries during the period 1975:1-2016:4.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.434-439
• /
• 2019

This paper proposed a control algorithm to compensate the delay time to improve the signal to noise, and the proposed control algorithm estimate the target information to apply the continuous wave radar equation. The proposed control algorithm improves the output signal of each array element bv multiplying the weight of the receive signal to the signal to noise ratio. Radar radiate a signal in spatial and the target information is estimated by the echoed signal from the target. But the signal in the wireless communication environment occurs the delay time due to the multipath which appear human and natural structures. It is difficult to accurately estimate the desired information because of the degradation for the system performance due to the interference signal and the signal distortion. The target information can be improved by compensating the delay signal to apply the weight to the received signal by using the uniform linear array antenna. As a simulation result, we show that the performance of the proposed control algorithm and the non-compensated delay time are compared. The proposed control algorithm proved that the target distance estimation information is improved.

• Journal of the Korea Computer Graphics Society
• /
• v.26 no.5
• /
• pp.15-24
• /
• 2020

We present a supervised learning method that estimates the simulation parameters required to simulate the fabric from the static drape shape of a given fabric sample. The static drape shape was inspired by Cusick's drape, which is used in the apparel industry to classify fabrics according to their mechanical properties. The input vector of the training model consists of the feature vector extracted from the static drape and the density value of a fabric specimen. The output vector consists of six simulation parameters that have a significant influence on deriving the corresponding drape result. To generate a plausible and unbiased training data set, we first collect simulation parameters for 400 knit fabrics and generate a Gaussian Mixed Model (GMM) generation model from them. Next, a large number of simulation parameters are randomly sampled from the GMM model, and cloth simulation is performed for each sampled simulation parameter to create a virtual static drape. The generated training data is fitted with a log-linear regression model. To evaluate our method, we check the accuracy of the training results with a test data set and compare the visual similarity of the simulated drapes.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.3
• /
• pp.213-218
• /
• 2021

It is known that total least-squares method shows better estimation performance than least-squares method when noise is present at the input and output at the same time. When total least squares method is applied to data with time series characteristics, Recursive Total Least Squares (RTS) algorithm has been proposed to improve the real-time performance. However, RTLS has numerical instability in calculating the inverse matrix. In this paper, we propose an algorithm for reducing numerical instability as well as having similar convergence to RTLS. For this algorithm, we propose a new RTLS using Iterative Wiener Filter (IWF). Through the simulation, it is shown that the convergence of the proposed algorithm is similar to that of the RTLS, and the numerical robustness is superior to the RTLS.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.1
• /
• pp.39-50
• /
• 2022

In this study, we suggested the optimal training period for predicting the streamflow using the LSTM (Long Short-Term Memory) model based on the deep learning and CMIP5 (The fifth phase of the Couple Model Intercomparison Project) future climate scenarios. To validate the model performance of LSTM, the Jinan-gun (Seongsan-ri) site was selected in this study. We comfirmed that the LSTM-based streamflow was highly comparable to the measurements during the calibration (2000 to 2002/2014 to 2015) and validation (2003 to 2005/2016 to 2017) periods. Additionally, we compared the LSTM-based streamflow to the SWAT-based output during the calibration (2000~2015) and validation (2016~2019) periods. The results supported that the LSTM model also performed well in simulating streamflow during the long-term period, although small uncertainties exist. Then the SWAT-based daily streamflow was forecasted using the CMIP5 climate scenario forcing data in 2011~2100. We tested and determined the optimal training period for the LSTM model by comparing the LSTM-/SWAT-based streamflow with various scenarios. Note that the SWAT-based streamflow values were assumed as the observation because of no measurements in future (2011~2100). Our results showed that the LSTM-based streamflow was similar to the SWAT-based streamflow when the training data over the 30 years were used. These findings indicated that training periods more than 30 years were required to obtain LSTM-based reliable streamflow forecasts using climate change scenarios.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.1
• /
• pp.19-26
• /
• 2022

This paper presents a pre-processing method to facilitate the container's BIC-code recognition. We propose a network that can find ROI(Region Of Interests) containing a BIC-code region and estimate a homography matrix for warping. Taking the structure of STN(Spatial Transformer Networks), the proposed network consists of next 3 steps, ROI detection, homography matrix estimation, and warping using the homography estimated in the previous step. It contributes to improving the accuracy of BIC-code recognition by estimating ROI and matrix using the proposed network and correcting perspective distortion of ROI using the estimated matrix. For performance evaluation, five evaluators evaluated the output image as a perfect score of 5 and received an average of 4.25 points, and when visually checked, 224 out of 312 photos are accurately and perfectly corrected, containing ROI.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.174-174
• /
• 2023

The impact of global warming on the south Asian summer monsoon is of critical importance for the large population of this region. This study aims to investigate the future changes of the precipitation extremes during pre-monsoon and monsoon, across this region in a more organized regional structure. The study area is divided into six major divisions based on the Köppen-Geiger's climate structure and 10 sub-divisions considering the geographical locations. The future changes of extreme precipitation indices are analyzed for each zone separately using five indices from ETCCDI (Expert Team on Climate Change Detection and Indices); R10mm, Rx1day, Rx5day, R95pTOT and PRCPTOT. 10 global climate model (GCM) outputs from the latest CMIP6 under four combinations of SSP-RCP scenarios (SSP1-2.6, SSP2-4.5, SSP3-7.0, and SSP5-8.5) are used. The GCMs are bias corrected using nonparametric quantile transformation based on the smoothing spline method. The future period is divided into near future (2031-2065) and far future (2066-2100) and then the changes are compared based on the historical period (1980-2014). The analysis is carried out separately for pre-monsoon (March, April, May) and monsoon (June, July, August, September). The methodology used to compare the changes is probability distribution functions (PDF). Kernel density estimation is used to plot the PDFs. For this study we did not use a multi-model ensemble output and the changes in each extreme precipitation index are analyzed GCM wise. From the results it can be observed that the performance of the GCMs vary depending on the sub-zone as well as on the precipitation index. Final conclusions are made by removing the poor performing GCMs and by analyzing the overall changes in the PDFs of the remaining GCMs.

• Journal of radiological science and technology
• /
• v.46 no.4
• /
• pp.277-285
• /
• 2023

In this study, pneumonia identification networks with the small number of layers were constructed by using chest X-ray images. The networks had similar trainable-parameters, and the performance of the trained models was quantitatively evaluated with the modification of the network architectures. A total of 6 networks were constructed: convolutional neural network (CNN), VGGNet, GoogleNet, residual network with identity blocks, ResNet with bottleneck blocks and ResNet with identity and bottleneck blocks. Trainable parameters for the 6 networks were set in a range of 273,921-294,817 by adjusting the output channels of convolution layers. The network training was implemented with binary cross entropy (BCE) loss function, sigmoid activation function, adaptive moment estimation (Adam) optimizer and 100 epochs. The performance of the trained models was evaluated in terms of training time, accuracy, precision, recall, specificity and F1-score. The results showed that the trained models with the small number of layers precisely detect pneumonia from chest X-ray images. In particular, the overall quantitative performance of the trained models based on the ResNets was above 0.9, and the performance levels were similar or superior to those based on the CNN, VGGNet and GoogleNet. Also, the residual blocks affected the performance of the trained models based on the ResNets. Therefore, in this study, we demonstrated that the object detection networks with the small number of layers are suitable for detecting pneumonia using chest X-ray images. And, the trained models based on the ResNets can be optimized by applying appropriate residual-blocks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.12
• /
• pp.1890-1897
• /
• 2022

In this paper, we design a navigation filter for an underwater glider. Underwater gliders are low-cost, reusable, and can be used for a long time. Two types of filters are designed considering characteristics such as small size, low cost, and low power. The navigation filter estimates the reference velocity of the underwater glider's body frame based on the minimum sensor output. The sensor configuration of the first filter consists of an accelerometer, a magnetometer, and a depth sensor. the second filter include extra a gyroscope in the same configuration. The estimated velocity is fused with the attitude, converted into the velocity of the navigation frame and finally the position is estimated. To analyze the performance of the proposed filter, analysis was performed using Monte Carlo numerical analysis method, and the results were analyzed with standard deviation (1σ). Standard deviations of each filter's position error are 334.34m, 125.91m.