• 대한기계학회논문집B
• /
• 제36권12호
• /
• pp.1201-1207
• /
• 2012

본 연구에서는 15kW 모터로 구동되는 $5m^3$/min의 유량을 고효율로 공급할 수 있는 2엽 비막힘형 수중 펌프의 임펠러를 설계하는 것을 목표로 임펠러 출구 위치 변화($h_I$), 출구 폭($b_2$) 및 허브 프로파일이 펌프 성능에 미치는 영향을 상용 해석용 프로그램 ANSYS CFX를 사용한 전산해석을 통해 수행하였다. 해석 결과, 임펠러 출구 위치 변화($h_I$) 및 출구 폭($b_2$)이 증가하면 양정 및 축동력의 경우는 $h_I$, $b_2$와 함께 지속적으로 증가하지만 효율의 경우는 $h_I$=38 mm, $b_2$=55 mm 까지만 증가하며, 그 이상의 값에서는 일정한 값을 가짐을 보여준다. 그리고 허브 프로파일의 변화는 상대적으로 임펠러 성능에 큰 영향을 미치지는 않는다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.99-103
• /
• 2000

This paper describes the development of standard series for turbo blowers. In mass production system, it is very required to standardize blowers to improve the productivity of ordering, estimating, manufacturing. To standardize blowers, we performed researches on the effects of $b_1$(impeller inlet width), $b_2$(impeller outlet width), ${\beta}_1$(blade inlet angle), ${\beta}_2$(blade outlet angle), Z(number of blades) of impellers and geometry of casing experimentally. Through this study, we chose the several best model of turbo blowers with high efficiency and low noise, which represent each specific speed series 63, 80, 100, 125, 160, 200, 250, 315. After the development of such standardized blowers, the test results are used to prepare the fan geometry and performance database for a selection software.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.71-84
• /
• 2020

In order to improve the performance of marine centrifugal pump, a centrifugal pump whose specific speed is 66.7 was selected for the research. Outlet diameter D2, outlet width b2, blade outlet angle β2, blade wrap φ and blade number z of the impeller were chosen as the variables. The maximum weighted average efficiency and the minimum vibration intensity at the base were calculated as objectives. Based on the Latin Hypercube method, the impeller was numerically optimized. The numerical results show that after optimization, the amplitudes of pressure fluctuation on the main frequency at different monitoring points decrease in varying degrees. The radial force on impeller decreases obviously under off-design flow rates and is more symmetrical during the operation of the pump. The variation of the axial force is relatively small, which has no obvious relationship with the rotating angle of the impeller. The energy performance and vibration experiment was performed for verifying. The test results show that the weighted average efficiency under 0.8Qd, 1.0Qd and 1.2Qd increases by 4.3% after optimization. The maximal vibration intensity at M1-M4 on the pump base reduced from 0.36 mm/s to 0.25 mm/s, decreasing by 30.5%. In addition, the vibration velocities of bracket in pump side and outlet flange also have significant reductions.

• 한국자동차공학회논문집
• /
• 제24권1호
• /
• pp.74-81
• /
• 2016

The aim of this study was to find the initial design value of turbine blade for electrical type turbocompound system generating 10 kW. Turbocompound is one of the waste heat recovery system applying to internal combustion engine to recover exhaust gas energy that was about 30 % of total input energy. To design the turbine blade, 1-D mean line flow model was used. Exhaust gas temperature, pressure, flow rate and turbine rotating speed was fixed as primary boundary conditions. The velocity triangles was defined and used to determine the rotor inlet radius and width, the rotor outlet radius at shroud and radius at hub, the rotor flow angles and the number of blades.

• 대한기계학회논문집B
• /
• 제34권9호
• /
• pp.843-850
• /
• 2010

본 연구에서는 생활폐기물 관로이송 설비에서 사용되고 있는 터보블로어의 성능향상을 목적으로 하며, 볼류트 케이싱의 확대반경과 폭에 따른 터보블로어의 성능특성을 삼차원 나비어-스톡스 방정식을 통한 수치해석과 실험적인 방법을 적용하여 분석하였다. 수치해석을 통한 압력과 효율특성은 실험값과 잘 일치함을 확인하였다. 수치해석을 이용한 볼류트 케이싱 형상특성 연구를 통하여, 터보블로어의 성능은 임펠러 익간 및 블로어 출구의 압력손실을 줄임으로써 개선됨을 확인하였다. 본 설계변수 분석을 통하여 효율은 약 3%, 압력은 약 2% 개선할 수 있었다. 또한 수치해석 결과를 이용하여 터보블로어의 내부유동장 특성을 비교, 분석하였다.