• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.2
• /
• pp.136-147
• /
• 2002

Characteristics of unit loads of pollutants were investigated at a paddy fields area(Soro-ri) with large-scaled plots on loam soil during irrigation seasons of 1999 ∼2000. The average irrigation requirement of experimental paddy area are estimated at over 3,000 mm. The unit loads of pollutants in paddy fields area are determined by subtracting irrigation water load from outflow load (percolated and surface outflow loads). Surface outflow load in rainy days was calculated using the relationships of discharge and load, which are grouped into fertilizing and non-fertilizing periods. The ratios of the surface outflow load in rainy days to the total surface outflow load are 16.4% for T-N, 26.8% for T-P, and 23.3% far CODc,. The unit loads of pollutants show month-to-month and year-to-year variations, and monthly unit load of pollutants can show negative values, indicating that the paddy area acts as the pollutants sink. The average unit loads of the pollutants during irrigation seasons were estimated at 18.2 kg/ha fur T-N, 0.31 kg/ha for T-P, and 43.3 kg/ha for CODc,, which are smaller than the reported values for Kosei area in Japan.

• Journal of Chest Surgery
• /
• v.13 no.2
• /
• pp.125-129
• /
• 1980

A patient with anomalous coronary artery crossing right ventricular outflow tract in association with Tetralogy of Fallot underwent total correction. The left anterior descending coronary artery was originated from right coronary artery anterior to the pulmonary valve ring. The incision from outflow tract to pulmonary artery tunneled underneath the aberrant artery and patch graft across the pulmonary valve ring to enlarge outflow of right ventricle and stenotic pulmonary valve ring.

• Wind and Structures
• /
• v.9 no.6
• /
• pp.419-440
• /
• 2006

This article synthesizes the literature on the meteorology, experimental simulation, and wind engineering ramifications of intense downburst outflows. A novel design of a large-scale test facility and experimental evidence of its validity are presented. A two-dimensional slot jet is used to simulate only the outflow region of a downburst. Profiles of mean velocity and turbulence quantities are acquired using hot-wire anemometry. Comparison with the literature provides empirical evidence that supports the current approach. A geometric analysis considers the validity of applying a two-dimensional approximation for downburst wind loading of structures. This analysis is applicable to power transmission lines in particular. The slot jet concept can be implemented in a large boundary layer wind tunnel to enable large-scale laboratory experiments of thunderstorm wind loads on structures.

• Wind and Structures
• /
• v.10 no.4
• /
• pp.315-346
• /
• 2007

A preceding companion article introduced the slot jet approach for large-scale quasi-steady modelling of a downburst outflow. This article extends the approach to model the time-dependent features of the outflow. A two-dimensional slot jet with an actuated gate produces a gust with a dominant roll vortex. Two designs for the gate mechanism are investigated. Hot-wire anemometry velocity histories and profiles are presented. As well, a three-dimensional, subcloud numerical model is used to approximate the downdraft microphysics, and to compute stationary and translating outflows at high resolution. The evolution of the horizontal and vertical velocity components is examined. Comparison of the present experimental and numerical results with field observations is encouraging.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.67.2-67.2
• /
• 2013

Part of mid-J CO emission detected by the Herschel/PACS observations of embedded young stellar objects (YSOs) has been attributed to the UV-heated outflow walls. We have applied our newly developed self-consistent models of Photon Dominated Region (PDR) and Non-LTE line Radiative transfer In general Grid (RIG) to the Herschel FIR CO observations. If the black body radiation of T = 15,000 K is used, the observed mid-J CO line fluxes can be produced in inner dense regions (n ${\geq}$ 106 cm-3) with -4.5 ${\leq}$ log Gdust/n ${\leq}$ -2.5, where gas temperatures are larger than 300 K and CO abundances are ${\geq}$ 10-5, along the UV-heated outflow walls. The contribution of the UV heated outflow cavity wall in Class I seems to be larger than that in Class 0.

• Korean Journal of Veterinary Research
• /
• v.55 no.3
• /
• pp.209-211
• /
• 2015

An 8-year-old spayed female Maltese (2.5 kg of body weight) presented with the primary complaint of loud heart murmur and exercise intolerance. Diagnostic imaging revealed severe pulmonic stenosis (peak velocity 5.2 m/s) with right ventricular hypertrophy. The dog revisited after 2 years, at which time, diagnostic imaging revealed severe biventricular hypertrophy, dynamic left ventricular outflow tract obstruction, left atrial dilation and pulmonary hypertension with worsened pre-existing pulmonic stenosis. Postmortem investigation revealed hypertrophic cardiomyopathy and regional myocardial infarction. The case was diagnosed as hypertrophic cardiomyopathy secondary to severe right and left ventricular outflow tract obstruction.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1209-1213
• /
• 2005

It reflects well feature of slope that is characteristic of city river basin of Pusan local. Process various hydrological datas and basin details datas which is collected through basin basis data. weather satellite equipment(EMS-DEU) and automatic water level equipment(AWS-DEU) and use as basin input data of ILLUDAS model, SWMM model and HEC-HMS model In order to examine outflow feature of experiment basin and then use in reservoir design of experiment basin through calibration and verification about HEC-HMS model. Inserted design rainfall for 30 years that is design criteria of creek into HEC-HMS model and then calculated design floods according to change aspect of the impermeable rate. Capacity of reservoir was determined on the outflow mass curve. Designed imagination reservoir(volume $54,000m^3$) at last outlet upper stream of experiment basin, after designing reservoir. It could be confirmed that the peak flow was reduced resulting from examining outflow aspect. Designing reservoir must decrease outflow of urban areas.

• Water for future
• /
• v.28 no.5
• /
• pp.129-140
• /
• 1995

In this study we derived steady-state relationships between surface saturation area and subsurface outflow, and between surface saturation area and soil moisture storage through numerical experiments with Richards equation on a hillslope. Numerical experiments analyzed the sensitivity of topographic and soil hydraulic properties on steady-state relationships between surface saturation area and subsurface outflow. And the power law for the extent of surface saturation area was determined as a function of subsurface outflow or soil moisture storage.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.303-308
• /
• 2004

It is recently reported that the importance of environmental impact assessment(EIA) about groundwater outflow problems is beingy raised in the case of tunnel excavation during railroad construction. The EIA about groundwater outflow into railroad tunnel is generally performed using the results of numerical analysis embodied through groundwater flow modeling program like MODFLOW. The basic data for this modeling include (1) the geological and hydrogeological investigation data along the planned block of tunnel excavation, (2) total amount of outflowed groundwater during tunnel excavation, and (3) the status of groundwater level fluctuation in the water-supply wells distributed in the planned block of tunnel excavation. In this study, the authors analyzed the cases of the computational modeling about groundwater outflow in three planned blocks of railroad tunnel, and suggest the environmental impact factors and mitigation plan during EIA of tunnel excavation in railroad construction.

• International Journal of Fluid Machinery and Systems
• /
• v.6 no.1
• /
• pp.18-24
• /
• 2013

In order to apply the design method of diagonal flow fan based on axial flow design to the design of radial-outflow type diagonal flow fan which has lower specific speed of 600-700 [$min^{-1}$, $m^3/min$, m], radial-outflow type diagonal flow fan which specific speed was 670 [$min^{-1}$, $m^3/min$, m] was designed by a quasi three-dimensional design method. Experimental investigations were conducted by fan characteristics test, flow surveys by a five-hole probe and a hot wire probe. Fan characteristics test agreed well with the design values. In the flow survey at rotor outlet, the characteristic region was observed. Two flow phenomena are considered as the cause of the characteristic region, one is tip leakage vortex near rotor tip and another is pressure surface separation on the rotor blade.