• Korean Journal of Heritage: History & Science
• /
• v.45 no.2
• /
• pp.72-99
• /
• 2012

Cheomseongdae, Korea's so-called "star-gazing tower" located in the former Silla Dynasty capital of Gyeongju, is generally believed to have maintained its original shape since its construction in 647. The stone structure was closely examined and measured by Gyeongju National Museum in 1962 and reexamined by Korean National Research Institute of Cultural Heritage in 2009. This research noted the following structural anomalies of Cheomseongdae. A corner of the top rectangle layer was broken diagonally in a form that can never be attributed to a natural cause. The four metal clamps under the top rectangle layer had been missing. Four grooves, with unknown usage, exist on the sides of the long rectangular stones projected out of the circular body at the second and third circular layers from the top. On the second circular layer from the top, there are three flat stones, less than a half as tall as their surrounding stones. The average height of the third circular layer from the top is only 23.5 cm, while the overall average of the entire 27 circular layers is 29.9cm. This research postulates that all these anomalies are due to prior destructions and improper restorations of the structure. The first destruction and restoration of Cheomsengdae was likely to have occurred before the mid 15th century. The damages might include a pavilion on the top of the structure and a stone with the name of the structure carved in. The Mongolian invasion in the 13th century was a most likely cause. After the restoration, the structure suffered at least another attack. The damages on the top layer and the missing iron clamps were due to the later attack. The grooves and flat stones were to house holding device that affixed certain objects to the outer surface of the circular body. The metal or stone objects might have faced upward at the four corners of Chemseongdae, bridging the gaps between the rectangle layers and circular layers. The current Chemseongdae lost at least the four affixed objects, four holding devices, and one flat stone.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.135-135
• /
• 2015

Tubes are of extreme importance in industries as for fluid channels or wave guides. Furthermore, some weapon systems such as cannons use the tubes as gun barrels. To increase the service life of such tubes, a protective coating must be applied to the tubes' inner surface. However, the coating methods applicable to the inner surface of the tubes are very limited due to the geometrical restriction. A small-diameter cylindrical magnetron sputtering gun can be used to deposit coating layers on the inner surface of the large-bore tubes. However, for small-bore tubes with the inner diameter of one inch (~25 mm), the magnetron sputtering method can hardly be accommodated due to the space limitation for permanent magnet assembly. In this study, a new approach to coat the inner surface of small-bore tubes with the inside diameter of one inch was developed. Instead of using permanent magnets for magnetron operation, an external electro-magnet assembly was adopted around the tube to confine the plasma and to sustain the discharge. The electro-magnet was operated in pulse mode to provide the strong axial magnetic field for the magnetron operation, which was synchronized with the negative high-voltage pulse applied to the water-cooled coaxial sputtering target installed inside the tube. By moving the electro-magnet assembly along the tube's axial direction, the inner surface of the tube could be uniformly coated. The inner-surface coating system in this study used the tube itself as the vacuum chamber. The SS-304 tube's inner diameter was 22 mm and the length was ~1 m. A water-cooled Cu tube (sputtering target) of the outer diameter of 12 mm was installed inside of the SS tube (substrate) at the axial position. The 50 mm-long electro-magnet assembly was fed by a current pulse of 250 A at the frequency and pulse width of 100 Hz and 100 usec, respectively. The calculated axial magnetic field strength at the center was ~0.6 Tesla. The central Cu tube was synchronously driven by a HiPIMS power supply at the same frequency of 100 Hz as the electro-magnet and the applied pulse voltage was -1200 V with a pulse width of 500 usec. At 150 mTorr of Ar pressure, the Cu deposition rate of ~10 nm/min could be obtained. In this talk, a new method to sputter coat the inner surface of small-bore tubes would be presented and discussed, which might have broad industrial and military application areas.

• Journal of Korean Dental Science
• /
• v.11 no.2
• /
• pp.71-81
• /
• 2018

Purpose: The purpose of this study was to investigate the corrosion behaviors of dental implant alloy after microsized surface modification in electrolytes containing Mn ion. Materials and Methods: $Mn-TiO_2$ coatings were prepared on the Ti-6Al-4V alloy for dental implants using a plasma electrolytic oxidation (PEO) method carried out in electrolytes containing different concentrations of Mn, namely, 0%, 5%, and 20%. Potentiodynamic method was employed to examine the corrosion behaviors, and the alternatingcurrent (AC) impedance behaviors were examined in 0.9% NaCl solution at $36.5^{\circ}C{\pm}1.0^{\circ}C$ using a potentiostat and an electrochemical impedance spectroscope. The potentiodynamic test was performed with a scanning rate of $1.667mV\;s^{-1}$ from -1,500 to 2,000 mV. A frequency range of $10^{-1}$ to $10^5Hz$ was used for the electrochemical impedance spectroscopy (EIS) measurements. The amplitude of the AC signal was 10 mV, and 5 points per decade were used. The morphology and structure of the samples were examined using field-emission scanning electron microscopy and thin-film X-ray diffraction. The elemental analysis was performed using energy-dispersive X-ray spectroscopy. Result: The PEO-treated surface exhibited an irregular pore shape, and the pore size and number of the pores increased with an increase in the Mn concentration. For the PEO-treated surface, a higher corrosion current density ($I_{corr}$) and a lower corrosion potential ($E_{corr}$) was obtained as compared to that of the bulk surface. However, the current density in the passive regions ($I_{pass}$) was found to be more stable for the PEO-treated surface than that of the bulk surface. As the Mn concentration increased, the capacitance values of the outer porous layer and the barrier layer decreased, and the polarization resistance of the barrier layers increased. In the case of the Mn/Ca-P coatings, the corroded surface was found to be covered with corrosion products. Conclusion: It is confirmed that corrosion resistance and polarization resistance of PEO-treated alloy increased as Mn content increased, and PEO-treated surface showed lower current density in the passive region.

• Journal of Sericultural and Entomological Science
• /
• v.30 no.2
• /
• pp.88-95
• /
• 1988

The structure ki mutant chorion is described by the ultrastructural level with the scanning electron microscope. The micropyle on the anterior, posterior, leteral and dorsal side region surface patterns do not so much differ from ki mutant and normal strains. The surface structure of ventral side of ki mutant, which is the presumptive embryonic region in oocytes, were netted part corresponding to the boundary of follicle cells that is similar to lateral side structure of egg-shell. The eggshell thickness of ventral side on the ki mutant is mostly thicker. However, the structure of transverse section of normal and ki mutant egg-shell are composed of the outer, middle and inner layers. The ki not effects the formation of the lamellar layer in the egg-shell. It is observed that the characteristic structure in ki mutant egg chorion may be attributed to a areal specificity of epithelium in ventral side of egg-shell formation, and it affects the process of the accumulation of secreted chorionic material and the egg-shell architecture.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1998.11a
• /
• pp.89-94
• /
• 1998

Marine sponges are recognized as a plentiful source of diverse biologically active secondary metabolites. Recently, we have initiated a research to discover antitumor constituents from the marine sponges collected from Korean Waters. Marine sponges collected from the South Sea of Korea were screened for several biological activities including such as brine shrimp lethality and cytotoxicity. Significant brine shrimp lethality was detected in the crude extract of a two-sponge association of Poecillastra sp. and Jaspis sp. A cross-section of this sample showed two layers of morphologically distinct sponges. The thin and dirty yellow outer layer was identified as Poecillastra sp. (Pachastrellidae), the surface of which was very rough. The light-grey inner layer was identified as Jaspis sp. (Jaspidae), the surface of which was smooth. This two-sponge association appears to be consistent as these sponges were always found in associated form regardless of collection site or collection period. Investigation of the bioactive constituents monitored by brine shrimp lethality assay led to the isolation of pectenotoxin II (PTX2) and psammaplin A as causative compounds for the brine shrimp lethality. $^1$H- and $\^$13/C-nmr signals of PTX2 was fully assigned utilizing TOCSY, HETCOR, Long-range HETCOR, and Homonuclear J-resolved 2D experiments. PTX2 displayed very potent and selective cytotoxicities in the 60 cell line panel antitumor assay at the NCI. PTX2 has progressed to acute toxicity determination and in vivo antitumor assay at the NCI (Table 1). However, significant in vitro antitumor activity of PTX2 can not be affirmed in the in vivo assay.

• Journal of Powder Materials
• /
• v.20 no.6
• /
• pp.432-438
• /
• 2013

In this study, analysis on the oxidation behavior was conducted by a series of high-temperature oxidation tests at both $800^{\circ}C$, $900^{\circ}C$ and 1000 in the air with sintered STS 316L. The weight gain of each oxidized specimen was measured, the oxidized surface morphologies and composition of oxidation layer were analyzed with Scanning Electron Microscope-Energy Dispersive x-ray Spectroscopy (SEM-EDS), finally, the phase change and composition of the oxidized specimen were shown by X-Ray Diffraction (XRD). As a result, the weight gain increased sharply at $1000^{\circ}C$ when oxidation test was conducted for 210 hours. Also, a plentiful of pores were observed in the surface oxidation layers at $900^{\circ}C$ for 210 hours. In addition, the following conclusions on oxidation behavior of sintered STS 316L can be obtained: $Cr_2O_3$ can be formed on pores by influxing oxygen through open-pores, $(Fe_{0.6}Cr_{0.4})_2O_3$ can be generated on the inner oxidation layer, and $Fe_2O_3$ was on the outer oxidation layer. Also, $NiFe_2O_4$ could be precipitated if the oxidation time was kept longer.

• The Korean Journal of Malacology
• /
• v.5 no.1
• /
• pp.1-9
• /
• 1989

A scanning electron microscopic study on the glochidium and glchidial encystment of Anodonta grandis on the guppy was conducted. The shape of the glochidium is apparently triangular and its averge size is 0.45mm X0.4mm when closed, The two glochidial shell valves are of the same size, kept together by a ligament of 120${\mu}{\textrm}{m}$ in length and 7 ${\mu}{\textrm}{m}$ in width. Each of the glochidial shell valves has a 16 ${\mu}{\textrm}{m}$ long hook sitdded with many spines on the superior face. A large area to the apex of the valve surrounding the base of the hook is provided with numerous small spines which become progressively smaller towards the periphery of the area, The external surface of the glochidial shell valve is covered with numerous small processes showing successive change in the shape and the pattern of destribution by part. Besides the processes, there are a number of niches scattered all over the exterior surface. The glochidial shell valve has two layers. One is the outer thin membrane bearing the processes and the niches and the others is the inner layer bearing numerous holes which any accessory structure and 2.65 ${\mu}{\textrm}{m}$ in diameter, emerges from a canal located at center of ventral plate of the mamtle, A total of three types of the hair cells are observed. In present artificial infection of the glochidium to the guppy, it took about three to four hours to complete an early cysts, During the period of encystment, The epithelial cells of the host fish actively migrated toward the attached glochidium and covered it.

• Ocean and Polar Research
• /
• v.27 no.3
• /
• pp.299-309
• /
• 2005

The community structure of meiobenthos was studied in the sediment of Kongfjorden, Spitsbergen of Svalbard Island in the Arctic Sea. Samples of meiobenthos were collected in August, 2003. Meiobenthic organisms were collected by SCUBA and van veen grab or acryl sub-corers 34mm in internal diameter, and were taken from upper sediment to a depth of 3cm at each station. A total of 26 meiofaunal groups were found in the sediment of Spitsbergen in Svalbard Island. Nematodes were the most dominant faunal group. Sarcomastigophorans, benthic harpacticoids, and nauplius larvae of crustaceans, were also important components of the meiobenthic community of Kongsfjorden. All of these low faunal groups were comprised of more than 90% of total meiobenthos at every station. The total density of meiobenthos at each station was highest at station MeG 6 $(3,583{\pm}1,137inds./10cm^2)$, and lowest at station $MeG9(28{\pm}1inds./10cm^2)$. Meiobenthos in general showed the highest density in the upper 1cm layer. This may be associated with food and oxygen supply to subsurface. Harpacticoids showed extreme preference at the surface and little presence in layers deeper than 2cm. These animals may be less resistant to oxygen deficiency, and nauplius also showed the same trend. However, in St. MeG 8 and 9, meiobenthos were dense at depths of more than 0-1cm, at especially at depths of 2-3m because of relatively easy penetration of oxygen. Based on the results of cluster analysis, three meiobenthos assemblages were distinguished: one was in the outer and two were in the inner fjord. Station SCU 5 was grouped with the meiobenthos assemblage located in the outer fjord. The outer ford community was characterised by : 1) a relatively low mean number of meiobenthos taxa, 2) a relatively high density of harpacticods and nauplius. One of the inner ford communities (a group of four nation: MeG 2, 3, 8, 9) was in the proximity of the glaciers. Specifically, it was characterised by : 1) a low mean number of meiobenthos taxa, 2) a low density. The other inner ford community was characterised by both a high density and great mean number of meiofaunal taxa.

• Korean Journal of Weed Science
• /
• v.14 no.2
• /
• pp.144-155
• /
• 1994

Scanning electron micrography and Transmission electron micrography studies were performed on the surfaces of stem(coleoptiles) of rice and barnyardgrass under various cropping patterns at 5 days after seeding or transplanting. Stem surfaces of rice under dry condition possessed rodlet-like epicuticular waxes, trichomes, stomata and cork cell layer in both broadcast and drilled rice while barnyardgrass had only thread-like epicuticular waxes, but trichomes, stomata and cork cell layers were not found. However, rice under water condition has no rodlet-like waxes, stomata and cork cells, and barnyardgrass was similar to that under dry condition. On the other hand, those on stems of 8-day and 25-day transplanted rice were well arranged and developed compared with those of direct seeded rice. Electron micrography showed significant difference in thickness of outer epidermal cell walls of rice and barnyardgrass under dry, water and transplanting condition. Thickness of outer epidermal cell was greater in transplanted rice, dry direct seeded rice, water-direct seeded rice and barnyardgrass in descending order.

• Journal of Conservation Science
• /
• v.33 no.5
• /
• pp.355-362
• /
• 2017

The Nongso tomb of Sunchang was built in a relatively deep place; hence there was little damage from grave robbers. The tomb was completely filled with a large amount of charcoal, and therefore the wooden coffin was excavated in relatively good condition. On the basis of the structure of the tombs, excavated artifacts, and radiocarbon dating results, the tomb is estimated to be from between the late Goryeo and the early Joseon period. The wooden coffin excavated is double-layered structures consisting of an outer coffin and an inner coffin. The outside of the wooden coffin is thickly lacquered and decorated with yellow letters and white motifs. An analysis of the pigments' components revealed that the major component of the letters was gold (Au) and the major component of the motifs was silver (Ag). The coffin lacquer had three layers: a pigment layer, a yellowish-brown layer, and a black layer. The wooden bases of the coffins were painted with a black substance, such as soot, as mineral elements were not detected in the black layer. The yellowish-brown layer is presumed to be refined lacquer. From the analysis of the structure of the layers and pigments, we can estimate the method was adopted for making lacquer for wooden coffin. It is assumed that the method used gold leaf and gold powder. The form of the pigment and the internal structure are likely to be gold leaf, but the shape of the surface letters appears to have been formed using gold powder. This study will serve as important information for understanding lacquer making techniques at the time of the tombs' construction by confirming the making method through reproduction experiments using gold leaf and gold powder.