• Ocean and Polar Research
• /
• 제40권4호
• /
• pp.223-235
• /
• 2018

This study was carried out to investigate benthic sedimentary environments and benthic polychaetous communities on the coast of Ulsan, located on the southern East Sea of Korea. This survey was conducted at 15 stations, four times seasonally in January, April, July and October 2016. From the coast to the outer sea, surface sediments turned into fine grained sediments. There were complex coarse-grained sedimentary facies in various forms in the coastal zones while those with mud facies were found in the offshore zone. Organic matter content (LOI) and sulfide amount (AVS) recorded extremely high values, and increased from the coast to the outer sea, showing a similar trend to mud content with depth. The benthic polychaetous community revealed a mean density of $525ind./m^2$, and the total species number of species was 84. The major dominant polychaetous species were Magelona japonica, Lumbrineris longifolia and Heteromastus filiformis throughout the four seasons. Magelona japonica was concentrated predominantly in shallow coastal areas, but was present in all the regions of the survey area. Lumbrineris longifolia showed higher density in offshore regions more than 30 m deep, whereas H. filiformis showed higher density in coastal areas less than 30 m in depth. As a result of cluster analysis, the study area was divided into three ecological areas according to species composition, such as the northern coastal area between Ulsan PortOnsan Port, the southern area around Hoeya River and the outer sea area. Benthic environments in the study area, as determined by AMBI and BPI index, maintained a healthy condition in all four seasons with the AMBI at a level above GOOD and BPI at a level above FAIR. As organic matter accumulation continues to take place in the Ulsan coastal area, it is essential that detailed research activities continue to be carried out and ongoing monitoring be maintained.

• Applied Microscopy
• /
• 제17권1호
• /
• pp.131-160
• /
• 1987

Anatomical features of the renal papilla and pelvis and ultrastructures of the epithelium covering these areas in four species of mammals were studied by means of light, scanning and transmission electron microscopy. In terms of the morphology of mammalian kidney types distinguished by Sperber(1944), Pfeiffer(1968) and Schmidt-Nielsen(1977), the kidneys of animal species used in this experiment were; 1) the mouse kidney with the fornix between a long conical papilla and the funnel-shaped pelvis, 2) the guinea pig kidney with the peripelvic column and pelvic pouch between a short conical papilla and the funnel-shaped pelvis, 3) the dog kidney with the peripelvic column and pelvic pouch between the crest-shaped papilla and the funnel-shaped pelvis, and 4) the cattle kidney which is divided into multiple renculi with minor and major calyces and pelvis. The renal papilla was lined with the simple or pseudostratified columnar epithelium which covered the inner zone of the renal medulla. The epithelial cells with numerous short microvilli on the surface contained a few organelles. In the mouse, the fornix was lined with one to two cell-layered cuboidal epithelium which covered the outer zone of the renal medulla and a part of the cortex. The epithelial cells of the fornix with numerous short microvilli or microridges on the surface had well-developed organelles. In the guinea pig, the peripelvic column was lined with the simple cuboidal or low columnar epithelium which covered the outer zone of the renal medulla. The epithelial cells with numerous short microvilli on the surface contained well-developed organelles. The pelvic pouch was lined with the pseudostratified columnar epithelium which was composed of four kinds of cells; the secretory cell with small electron-dense granules (310 nm), the secretory cell with large granules (720 nm) showing various electron densities, the mitochondria-rich cell with a single cilium, and the basal cell. Pelves of the mouse and guinea pig, peripelvic column, pelvic pouch and pelvis of the dog, and minor and major calyces and pelvis of the cattle were lined with the transitional epithelium. The fusiform vesicles in the superficial cells of the epithelium were highly developed in the dog, relatively well developed in the mouse and guinea pig, and poorly developed in the cattle. From the above findings, it is suggested that the transport of solutes and water of the urine in the pelvic cavity can take place through the epithelia covering the renal papilla and fornix of the mouse, papilla and peripelvic column of the guinea pig, and papillae of the dog and the cattle. And specialized cell types in the epithelium of the guinea pig pelvic pouch, two kinds of secretory cells and mitochondria-rich cell with a single cilium, could have peculiar functions in the renal pelvis, respectively.

• 해양환경안전학회지
• /
• 제24권7호
• /
• pp.841-847
• /
• 2018

세계 에너지 소비와 에너지 수요가 급격히 증가함에 따라 환경문제와 지속가능성에 대한 관심이 요즘 더욱 중요해지고 있다. 신재생에너지 중 해상풍력발전과 같은 깨끗하고 재생가능한 에너지자원은 대체에너지 자원으로 주목받고 있다. 유지보수 및 운영상의 관점에서 해상풍력발전은 일반적으로 연근해해역에 설치될 계획이지만 해상풍력발전단지의 개발은 계획된 풍력단지를 따라 기존의 해상교통으로부터 다양한 해상교통 간섭에 직면해 있는 실정이다. 해상풍력발전단지 인근해역 및 단지 내에서 해상교통을 안전하고 효과적으로 통제하기 위해 선박이 해상풍력단지 내에서 통항할 수 있도록 표준 기준을 제안한다. 따라서, 본 연구의 목적은 국외 해상풍력발전단지의 현지 규정을 조사하여 해상풍력발전단지에 대한 선박통항 허용 및 안전구역 기준을 수립 하는데 있다. 풍력단지의 내측 안전구역은 풍력터빈 날개 회전직경의 150 %를 적용한 거리와 외측안전구역으로는 외곽에 위치한 풍력터빈으로부터 200 m의 범위의 거리를 제시하였으며, 또한 풍력단지 내 선박통항 허용기준은 풍력터빈 날개의 높이와 조위를 평가하여 향후 서남해 해상풍력발전단지의 실증단지 해역에서 Air draft 14.47 m가 선체 접촉을 피할 수 있는 최소 마진을 가진 기준을 제시하였다. 향후 연구과제로서, 단일 해상풍력단지 내의 선박 통항 기준과 더불어 인접한 해상풍력단지 간의 선박통항 기준마련을 위한 후속연구가 필요하다.

• Computers and Concrete
• /
• 제14권6호
• /
• pp.675-694
• /
• 2014

Annular and solid concrete specimens with different aspect ratios and static unconfined compressive strengths were studied for impact loading using SHPB test setup. Numerical simulations in LSDYNA were also carried out and results were validated. The stress-strain curves obtained under dynamic loading were also compared with static compressive tests. The mode of failure of concrete specimen was a typical ductile failure at high strain rates. In general, the dynamic increase factor (DIF) of thin solid specimens was higher than thick samples. In the numerical study, the variation of axial, hydrostatic and radial stresses for solid and annular samples was studied. The core phenomenon due to confinement was observed for solid samples wherein the applied loads were primarily borne by the innermost concrete zone rather than the outer peripheral zone. In the annular samples, especially with large diameter inside hole, the distribution of stresses was relatively uniform along the radial distance. Qualitatively, only a small change in the distribution of stresses for annular samples with different internal diameters studied was observed.

• 한국버섯학회지
• /
• 제10권3호
• /
• pp.101-108
• /
• 2012

Pleurotus ostreatus 'Miso' is a mutant strain showing white color in pileus from the known parent strain 'Wonhyeong 1'. Shape and several other characters also vary with culture conditions. Mating experiments were performed to understand interstrain mating relationship using monokaryons of the parent and the mutant strains. All monokaryons were grown from single spores isolated from freshly collected fruit bodies. Pairings were performed in 90 mm petri dishes on PDA. They were allowed to grow at 25 until two fronts of the advancing mycelia met and developed a conspicuous contact zone. The contact zone and the outer edges of paired colonies on each plate were examined for clamp connections. The parent and the mutant resulted in tetrapolar incompatibility in intrastrain crosses. In interstrain crosses, each monokaryotic tester strain of the parent strain was out-crossed to monokaryotic tester strains of the mutant. As a result of these crosses it was found that both strains share the same A and B incompatibility factors yielding 25% compatibility.

• 소성∙가공
• /
• 제20권3호
• /
• pp.236-242
• /
• 2011

The two objectives of this study were, first, to determine the optimal friction welding process parameters using finite element simulations and, second, to evaluate the mechanical properties of the friction welded zone for large piston rods in marine diesel engines. Since the diameters of the rod and its connecting part are very different, the manufacturing costs using friction welding are reduced compared to those using the forging process of a single piece. Modeling is a generally accepted method to significantly reduce the number of experimental trials needed when determining the optimal parameters. Therefore, because friction welding depends on many process parameters such as axial force, initial rotational speed and energy, amount of upset and working time, finite element simulations were performed. Then, friction welding experiments were carried out with the optimal process parameter conditions resulting from the simulations. The base material used in this investigation was AISI 4140 with a rod outer diameter of 280 mm and an inner diameter of 160 mm. In this study, various investigation methods, including microstructure characterization, hardness measurements and tensile and fatigue testing, were conducted in order to evaluate the mechanical properties of the friction welded zone.

• KIEAE Journal
• /
• 제17권4호
• /
• pp.75-81
• /
• 2017

Purpose: Most contemporary office buildings supply external views, a sense of openness and a sense of time to their occupants by adopting the curtain walls, which are equipped with an outer cover having large window area. As a result, the amount of radiation increases, adversely affecting cooling load during the summer in office buildings. Although solar radiation decreases heating load and reduces energy costs during the winter period, due to the characteristics of offices where occupants work largely during daytime, the cooling load is important compared to the heating. Therefore, diverse measures to resolve those trade-offs and annual energy cost have been investigated. Method: In this study, the annual thermal load was comparatively analyzed according to the slat angle of the venetian blind along with lighting control technique. Result: After selecting effective conditions, in order to resolve such issues, this study established automated control strategies of slat angle depending on the window-to-wall ratio and zone orientation, so that the findings of this study can be effectively generalized to other circumstances.

• 열처리공학회지
• /
• 제13권3호
• /
• pp.143-150
• /
• 2000

Ferritic plasma nitrocarburising was performed on pure iron using a modified DC plasma unit. This investigation was carried out with various gas compositions which consisted of nitrogen, hydrogen and carbon monoxide gases, and various gas pressures for 3 hours at $570^{\circ}C$. After treatment, the different cooling rates(slow cooling and fast cooling) were used to investigate its effect on the structure of the compound layer. The ${\varepsilon}$ phase occupied the outer part of the compound layer and ${\gamma}^{\prime}$ phase existed between the ${\varepsilon}$ phase and the diffusion zone. The gas composition of the atmosphere influenced the constitution of the compound layer produced, i.e. high nitrogen contents were essential for the production of ${\varepsilon}$ phase compound layer. It was found that with increasing carbon content in the gas mixture the compound layer thickness increased up to 10%. In the gas pressure around 3 mbar, the compound layer characteristics were slightly effected by gas pressure. However, in the low gas pressure and high gas pressure, the compound layer characteristics were significantly changed. The constitution of the compound layer was altered by varying the cooling rate. A large amount of ${\gamma}^{\prime}$ phase was transformed from the ${\varepsilon}$ phase during slow cooling.

• 천문학논총
• /
• 제11권1호
• /
• pp.27-47
• /
• 1996

We have performed the high resolution computer simulation with 1D spherical hydrodynamic code in order to study the dynamical evolution of supernova ejecta interacting with a pre-existing fast wind structure. The fast wind structure has been calculated with $M_{in}=3{\times}10^{-6}M_{\odot}yr^{-1}$ and ${\upsilon}_{in}=1000km/sec$, which velocity is higher than the critical velocity relating to the initial radiative cooling. The fast wind becomes initially adiabatic. After a shell formation time of ${\sim}4000yrs$, the wind becomes radiative cooling at the shell zone, forming a thin dense radiative shell and an adiabatic wind bubble afterward. When supernova explodes in the wind center at 20,000yrs after the wind evolves, the supernova ejecta, which has a dense distribution of ${\rho}{\propto}r^{-n}$(here we have n = 9), interacts initially with, the understood wind zone, producing forward and reverse shocks. The reverse shock heats the supernova ejecta and its temperature increases. In this study, as the mass of the supernova ejecta is larger than that of the wind shell ($M_{ej}=5M_{\odot}$, $M_{sw}=2M_{\odot}$), we can conform two shell structures: an outer shell by the supernova ejecta and a secondarily shocked wind shell by it. The secondarily shocked wind shell should accelerates in this case to be R-T unstable, consequently producing the knots.

• 자원환경지질
• /
• 제27권2호
• /
• pp.131-145
• /
• 1994

The Daehung and Pyeongan talc mines are located in the Yoogoo area, Chungcheongnam-Do. These deposits occur as the complex vein type in the ultramafic rocks which intruded Precambrian gneiss. The talc ore formed from sepentinitt: originated from ultramafic rocks but some of those from hornblende gneiss. The talcification processes were considered here on the basis of the mineral assemblages, paragenesis, and geochemistry. It appears that there are five processes in talcification ; serpentine$\rightarrow$talc, phlogopite$\rightarrow$chlorite$\rightarrow$talc, phlogopite$\rightarrow$talc, hornblende$\rightarrow$chlorite$\rightarrow$talc, and hornblende$\rightarrow$talc. Among them, the most dominant alteration path is serpentine to talc in these deposits. EPMA data suggest that there might be interstratified minerals were in between parent mineral and talc such as serpentine and talc, and phlogopite and talc. It can be found that tremolite exists in between the inner and outer most part of talcified serpentinite blocks coated with phlogopite. Some of tremolites has been altered to talc. The quartz veins and carbonate minerals were found in the talc ore zone. It indicates that the hydrothermal solution played an important role in talcification. The hydrothermal alteration occured after sepentinization. Ore zones can be divided into two zones; talc-serpentine zone preserving a pseudormorph of olivine (mesh texture) and talc-phlogopite zone showing talcification from phlogopite directly or through chlorite. It can be concluded that the formation of major talc ore body was due to talcification of serpentinite and phlogopite by hydrothermal solution. A nature of hydrothermal solution was relatively pure water at the beginning of serpentinization, and was getting richer in silica composition. There was a large amount influx of K and AI with hydrothermal solution in the later stage, and increased $P_{CO_{2}}$ also. It suggests that phlogopite formed in later stages as a secondary mineral. So, the major part of the talc ore body was formed from one parents rocks, serpentinite originated from ultramafic rocks, by hydrothermal solutions at several times.