• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1085-1088
• /
• 2001

The process of styrofoam pattern that has been used for material of press die pattern depends chiefly on handwork. Laser manufacturing system developed to increase precision and efficiency of process that is also able to convert the design easily. Applying the RP(rapid prototyping) concept reversely, the unnecessary part of section is vapored away by heat source of laser beam after converting 3-D CAD model into cross-sectional shape information. Laser beam is line-scanned in plane specimens to measure the depth and width of cut, surface roughness, cross-sectional shape as converting laser power, scanning speed, cutting gas pressure. With these basic data, plane surface, inclined surface, hole, outer contour trimming process is experimented and optimum condition are obtained. In plane and inclined surface experiments, 15W laser power and 50mm/s scanning speed make superior processing property and 30W, 10mm/s make processing efficiency increase in trimming process. With these results, simple patterns were manufactured and the possibility of applying laser manufacturing system to styrofoam pattern was convinced.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.239-248
• /
• 1997

The nesting of parts cut on raw steel plate has been a subject of interest to the shipbuilding industry for many years. "Nesting" is defined operation of layout of the parts on the raw material with minimizing the waste rate. Therefore, it is very important to optimize the cutting area. Since the existing nesting programs are prepared for expensive workstations and the expert, it is needed to develop nesting program for personal computer to improve the technology of small/middle sized shipyards and their productivity. This study involves development and application of appropriate optimization technique to solve the problem of plate nesting. And the appropriate D/B for storing nesting data developed, the function of D/B is introduced in this paper.his paper.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.3
• /
• pp.13-20
• /
• 1983

A method for the detecting defined vertices is described in this paper. An alogrithm detecting vertex position by means of calculating an error and distinguishing the defined inner and outer corners by the chain code of line segments is described. To calculate the error, virtual links are detected by means of a jointing relations of line segments for a contour. And so an error is calculated by measuring a minimum distance from a jointing point between the line segments to virtual link. As a result, this method is more flexible and effective than conventional Freeman's method.

• The Research Journal of the Costume Culture
• /
• v.11 no.5
• /
• pp.671-682
• /
• 2003

The purpose of this study is to analyze styles of costume and understand meanings related to costume embodied in the images of Buddha in Baekche period. Visual and textual analysis of the paintings include the images of Buddha in Baekche period was used for the research. The results of this study were summarized as fellows; Budah's hair style is identified as simple, Gae. Buddha wears Sanghati(outer wear) made of Tongeun and Peundanwoogeun, and many cases Sanghati made of Tongeun are usually seen. Three kinds of upper garment were identified; Samkaksika, right and left crossed upper garment, and Peunsam. Samkaksika was frequently seen in the paintings. Lower garment was a Nirasana reach to the ankle, was worn with a belt. Two skirts were also seen occasionally. The symbolic meaning of costume of Buddha was related to its religious meaning and identified as majesty and saintliest, which is harmonized with her simple costume styles. The wrapped style of costume, which did not show the contour of the buddha's body adds mystery. Also, the styles of costume created by different wrapping methods signify originality.

• Korean Journal of Veterinary Service
• /
• v.20 no.2
• /
• pp.183-189
• /
• 1997

This article reports a spontaneous thoracic teratoma in a laying hen (Deklb brown warren). In this case, a 40 days old hen was submitted for necropsy as part of an investigation into a flock problem suspected Marek's disease to Chonbuk Veterinary Service Laboratory in 1983. On the gross finding, mass was In the cranial subpulmonary cavity and attached to the vertebral column. It contained fully developed contour feathers. Histologically, feathers were arised from feather follicles complete with arrector plumi muscle, nerve, vessel and mucous gland composed with simple tall columnar epithelium. The outer surface of mass was lined by keratinized or nonkeratinized stratified squamous epithelium. It converted to pseudostratified ciliated columnar epithelium in some area. There were lymphocyte infiltration around gland tissue and eosinophilic intranuclear inclusion bodies in nonkeratinized epithelium. This thoracic teratoma was composed of ectodermal origin, squamous epithelium and nerve, and endodermal origin, mucous gland. This case in laying hen has never been reported in the literature in the world.

• Journal of Broadcast Engineering
• /
• v.2 no.2
• /
• pp.114-124
• /
• 1997

In object based coding, binary shape ccx:ling plays an important role by ccx:ling the outer shape of object. Here we propose a new shape ccx:ling tool, which enccx:les the outline of shape from a baseline. Different from 2-D (Vertex) shape ccx:ling algorithms. the proposed method encodeds the data that are extracted in a I-D fashion. The enccx:led data consist of the starting position, distance lists, and turning point lists. In the lossless ccx:ling mode, every contour pixel is input for ccx:ling, whereas variable sampling has been employed to enccx:le fewer contour pixels while preserving reasonable distortion. For interframe ccx:ling, a fast motion compensation was achieved by use of distance and turning point lists. Subjective viewing tests proved that the proposed method outperforms the current shape ccx:ling standard, CAE, in MPEG-4. In objective results for compression efficiency, the proposed method was significantly better in intraframe coding than CAE, whereas CAE was better in interframe ccx:ling.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.4
• /
• pp.334-341
• /
• 2003

When the pressure tubes(f are in contact with the calandria tube(CT) in the pressurized heavy water reactor(PHWR), the temperature difference between inner and outer wall of W results in a thermal diffusion of hydrogen (deuterium) and hydride blisters are formed on the outer surface of PT. Because the hydride blisters and zirconium matrix are acoustically continuous, it is not easy to distinguish the blisters from the matrix with conventional ultrasonic method. An ultrasonic velocity ratio method was developed to detect small hydride blisters on the zirconium pressure tube. Hydride blisters were grown in the PT specimen using a steady state thermal diffusion device. The flight times of longitudinal echo and reflected shear echo from the outer surface were measured accurately. The velocity ratio of the longitudinal wave to the shear wave was calculated and displayed using contour plot. Compared to the conventional flight time method of longitudinal wave, the velocity ratio method shows superior sensitivity to detect smaller blisters as well as better images for the blister shapes. Detectable limit of the outer shape of the hydride blisters was conservatively estimated as $500{\mu}m$, with the same specifications of ultrasonic transducer used in the actual PHWR pressure tube inspection.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.1
• /
• pp.65-72
• /
• 1991

For the enhancement of a comprehension in temporomandibular joint radiographs, the author has compared and analysed the roentgenographic images of the temporomandibular joint of human dry skull which was taken by submentovertex projection, panoramic radiography, oblique lateral transcranial projection, corrected anterio-posterior tomogram and corrected lateral tomogram. The obtained results were as follows. 1. The submentovertex projection represented in detail the both poles and the posterior surface of the condylar head of the mandible. 2. The oblique lateral transcranial projection represented the articular space, the outer contour of the condylar head and the position of the condylar head within the mandibular fossa, but the relationship of the temporomandibular joint was not revealed accurate, because of the oblique direction of a central ray in taking radiographs. 3. The corrected antero-posterior tomogram was superior method in representation of roent- genographic images of the superior surface and the both poles of the condylar head and the corrected lateral tomogram was considered as the most accurate method among some radiographic techniques for the interpretation of articular space and condyle-fossa relationship. 4. It was possible to observe three-dimensionally the head of condyle with the combinated use of submentovertex projection, corrected antero-posterior tomogram and corrected lateral tomogram.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.3
• /
• pp.203-211
• /
• 2014

To raise the industrial competitiveness in the field of ship-building, it is crucially important that the yard should use production facilities and working space effectively. Among the related works, the management of tremendous blocks' number, the limited area of assembly shops and inefficient personnel and facility management still need to be improved in terms of being exposed to a lot of problems. To settle down these conundrums, the various strategies of block arrangement on the assembly floors have been recently presented and in the results, have increasingly began to be utilized in practice. However, it is a wonder that the sampled or approximated block shapes which usually are standardized projections or the geometrically convex contour only have been prevailed until now. In this study, all parts including the panel, stiffeners, outer shells, and all kinds of outfitting equipment are first extracted using the Volume Primitive plug-in module from the ship customized CAD system and then, the presented system constructs a simpler and more compact ship data structure and finally generates the novel projected contours for the block arrangement system using the adaptive concave hull algorithm.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.3
• /
• pp.191-199
• /
• 1997

This paper develops the piece creation of Hull-structure using PC(Personal Computer) which is from CADRA of graphic program. Large-sized shipbuilding yard was carried out on the development of CNC(Computer Numerical Control) auto cutting system used in super S/W such as AUTODEF, TRIBON. But this system needs lots of expenses and high technician, and only used in large-sized shipbuilding yard, not medium-sized and small-sized shipbuilding yard. To bring up the small and medium-sized ship building yard lacking a little competitive power. Small and medium-sized shipbuilding yard need the piece creation of Hull Structure S/W which is joined with the CADRA. Therefore the piece creation of Hull-Structure S/W is developed to joined with the CADRA of graphic S/W to create the piece to be needed on as auto cutting process using PC.