• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.343-359
• /
• 2017

Many researches and policies have been carried out for saving energy in buildings. However, there are a few studies of thermal characteristics of wood-based materials that have been widely used as structural materials and finishing materials in buildings. In this study, thermal bridging areas were found to investigate thermal performance of residential building using non wood-based materials and wood-based materials. And heat transfer analysis of 16 case studies according to composition of structural materials and finishing materials was conducted. Also in this experiment, Physibel Trisco was used as the heat transfer analysis simulation tool, which conforms to the calculation method of ISO 10211. Analytical modeling was also carried out according to the ISO 10211, and the boundary temperature conditions were set at room temperature $20^{\circ}C$ and outdoor temperature $-11.3^{\circ}C$ (Seoul standard) according to the energy saving design standard in South Korea. Applied structures are classified according to the cases of concrete structure with non wood-based finishing materials, concrete structure with wood-based finishing materials and wood structure. Analyzed building elements were divided into a wall, a roof, an interlayer floor and a bottom floor. As a result, it can be confirmed that the thermal bridge of the concrete structure and wood structure were caused by the geometrical and material causes. In addition, the structural thermal bridge was caused in the discontinuity of the insulation in the concrete structure. Also it was confirmed that the linear heat transfer coefficient of the wall decreases when the wood-based materials are applied to the concrete structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.610-616
• /
• 2020

Recently, the application of a photocatalyst to road structures is being attempted to solve environmental problems caused by fine particulate matter and automobile exhaust. The purpose of this study was to develop a release agent with GST (low-cost, high-performance photocatalyst produced from wastewater sludge). For this, the method of mixing and dispersing GST with the release agent was used first, and the removal performance of nitrogen oxide (NOx) was then checked. The best performance without a precipitation reaction was achieved using a stabilizing agent at 20 % in an outdoor exposure test for four weeks. The NO and NOx removal rate of the specimen demolded by applying the GST release agent developed in this study showed excellent effects of 200 to 400 % compared to the Plain material. To increase the performance of the GST release agent, it is necessary to improve the dispersibility of GST in the release agent and increase the amount of the nano-sized photocatalyst. In addition, the use of GST release agent in road structures and exposed concrete is expected to increase the NOx removal efficiency.

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.373-381
• /
• 2009

To preserve steel cultural properties on display outdoors, the surface of these relics is processed with a covering treatment, which is a typical anti-corrosion method. Since the registered cultural heritage of Korea No. 78 Locomotive at Jangdan Station of Gyeongui Line will be treated by preservation process and displayed in the open outdoor area, effective surface covering agents were selected through testing to prevent the corrosion of the locomotive. The mixed wax are based on two types of microcrystalline wax which is one of regular surface covering agents for locomotives and bee‘s wax. For the weather resistance test, 3 types of wax were applied to each specimen of the locomotive and the specimens were tested in the Xenon-Arc Accelerated Weathering Tester for 1000 hours in accordance with the ISO 4892-1981 criteria and the test results were compared. As a result, on the surface of the specimen coated with the bee's wax, a whitening event appears after 400 hours which causes aging, and the specimens coated by the microcrystalline wax showed signs of a whitening event after 800 hours. The moisture contact angle with the microcrystalline wax coating was also less than with the bee's wax. Therefore, it was found that the high temperature microcrystalline wax is the most effective coating agent in terms of weather resistance and moisture blocking capability and the high temperature microcrystalline wax was adopted for coating the surface of the locomotive.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.252-257
• /
• 2015

Fruit cracking and vine leaf spot of grapes tend to occur when the plants were directly exposed to rain under outdoor culture. Rain shelter facility can be an alternative method to prevent the cracking and disease of grape, but it also has some limitations in practical usages. We designed rain shelter facility which can completely shut out the rain and ventilate naturally, and it was upgraded to meet the standards of disaster prevention against snow and wind load. The newly developed rain shelter has two-story roof structure, and the $2^{nd}$ floor roof was equipped over $1^{st}$ floor roof at a distance of 40cm. For natural ventilation and water proof, the upper roof protruded about 50cm from the ridge of a $1^{st}$ floor roof. The various tests were carried to examine such as grape quality, brown spot and fruit cracking of Campbell Early under the conventional and the newly developed rain shelter facility which was built about $100{\ss}{\check{S}}$. In comparison of temperature between the conventional and the newly developed rain shelter facility when outside temperature was more than $34^{\circ}C$, the inside temperature was recorded as $40.7^{\circ}C$ and $37.4^{\circ}C$, respectively. There was no significant difference between the two facilities when outside was below $32^{\circ}C$ The quality such as soluble solids and marketable fruit was increased, and fruit cracking of grapes and vine leaf spot also drastically diminished in the newly developed rain shelter.

• Journal of Korea Multimedia Society
• /
• v.8 no.10
• /
• pp.1369-1382
• /
• 2005

Vehicle segmentation, which extracts vehicle areas from road scenes, is one of the fundamental opera tions in lots of application areas including Intelligent Transportation Systems, and so on. We present a vehicle segmentation approach for still images captured from outdoor CCD cameras mounted on the supporting poles. We first divided the input image into a set of two-dimensional grids and then calculate the feature values of the edges for each grid. Through analyzing the feature values statistically, we can find the optimal rectangular grid area of the vehicle. Our preprocessing process calculates the statistics values for the feature values from background images captured under various circumstances. For a car image, we compare its feature values to the statistics values of the background images to finally decide whether the grid belongs to the vehicle area or not. We use dynamic programming technique to find the optimal rectangular gird area from these candidate grids. Based on the statistics analysis and global search techniques, our method is more systematic compared to the previous methods which usually rely on a kind of heuristics. Additionally, the statistics analysis achieves high reliability against noises and errors due to brightness changes, camera tremors, etc. Our prototype implementation performs the vehicle segmentation in average 0.150 second for each of $1280\times960$ car images. It shows $97.03\%$ of strictly successful cases from 270 images with various kinds of noises.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.9
• /
• pp.63-74
• /
• 2018

Purpose - The current study is to compare the cognition of stakeholders on hosting a mega sports event between Korea and the United States. In particular, to understand their cognition and perceptual conflict towards hosting a mega sports event, the study employed conflict theory. Furthermore, the study reviewed the role of social capital in the process of managing the mega sports events. Research Design, Data, and Methodology - Of homogeneous sampling, purposeful sampling method and criterion-based selection approach were used to collect interview data from key stakeholders who have been involved in hosting a mega sports events in Korea and the United States. In-depth interview transcripts were reviewed multiple tiems after transcription to extract concepts and meanings that were pertinenet to the experience involving hosting a mega sports event. Further member checks was conducted to increase the credibility of the results. Results - Results can be summarized as followed: First, stakeholders of Korea have a strong desire for positive economic effects of a mega sports event, compared to those in the United States who are more concerned in enhancing the public interests and concerns. Second, in Korea, various socio-political issues emerged at the same time and conflicts among multiple stakeholders have aggravated the situations to coordinate the issues. This was because legal system supporting socio-trust has not been established. On the other hand, major stakeholders of the United States consisted of community members who have socio-trust and networks. Thereby these social resources have been found playing a key role in building social capital that assists the stakeholders to coordinate the current issues and to solve them. Conclusions - The current study analyzed the cognition and perceptual conflict of stakehoders in a mega sports event. Social capital has beend found as a key catalyst to increase a network and cooperation among stakeholders. In order to enhance social capital in managing a mega sports event hosted in Korea, legal systems that establish networks and relationships among the related stakeholders need to be developed. Furthermore, the systematic guideline needs to be developed, organizing the sub-committees according to the types of stakeholders and the categorized common needs.

• Journal of the Korean earth science society
• /
• v.28 no.1
• /
• pp.14-23
• /
• 2007

The purpose of this study was to investigate beginning earth science teachers' perceptions about Learning in Geologic Field Trip. The hundred and sixteen high school earth science teachers who were in the training for their promotion answered the questionnaire of Learning in Geologic Field Trip. It was divided into five parts: needs and educational values, teachers' experiences and their difficulties, and desirable teaching methods of Learning in Geologic Field Trip. Results indicated that the participants perceived Learning in Geologic Field Trip important in earth science education and responded positively to the educational values of Learning in Geologic Field Trip. Most of the beginning teachers had experience of geologic field trip, but did not learn how to teach it to their students during the geologic field trip in the pre-service training program. It was shown that only a few teachers had experience of geologic field trip and of teaching students in the outdoor of geologic fields after they became a classroom teacher. Most of the participants perceived that teaching students about the geologic field trip is difficult because of lack of their experience. In order to overcome the difficulty, teachers suggested that they need to learn how to teach the geologic field trip to students through their in-service training. leachers suggested that a desirable teaching method of the geologic field trip is to provide teachers with a teacher's manual including geological explanation and information about field trip sites before their visit so that they can scaffold it and facilitate the students' cooperative group activity during the field trip. As a follow up activity, the participants agreed that the presentation and discussion about the results should concur.

• Journal of the Korean Society of Costume
• /
• v.6
• /
• pp.65-87
• /
• 1982

1. Purpose: The purpose is to apply and adapt ancient textile pattern to practical life, and to contribute to the promotion of the creative development of modernization and Koreanization of textile pattern by the survey of the extent of taste for the textile pattern existent in Korean costume among costumes. 2. Hypothesis: Textile pattern is in most classical one expressed in fact, but nowadays abstract or geometric one is more exist. Consumers are in most part in forties, and so the taste cannot be ignored. Therefore aesthetic consciousness found Korean costume is more important rather than excessively bold or mordern one. 3. Method and Process: (1) This research is analysed 386 one through college student and parents of a primary or high school. (2) Taste of the pattern is comparisoned and analyzed as age. education, pocket money of the student or an income of a month in home through computer. And the analysis of the statistics research is operation through the Chi-Square Goodness of-Fit-Test. 4. Conclusion: (1) The Korean costume put on mostly party or formal dress, therefore it should be researched as an outdoor dress with traditional costume. (2) The most one is concerned in textile pattern, it's taste is different from color, constitution. Textile industry is developed not only weave pattern, gold-coverning pattern but embroidry pattern, dye pattern, therefore the various side of pattern design should be researched. (3) In Side of form, plant pattern is not only most various but highest in popularity. According to approach nowadays, all of the pattern becomes composition or geometric one with abstract tendency and so from these day pattern is necessary combinationed, researched with our people emotion. (4) The color of textile pattern is choiced individual taste. Through investige, research in various side of the modern taste and our costume, we take growing interest in the color, composition of textile, and should dressed with beauty and grace. (5) In side of size, textile pattern is choiced to individual face and body shape through research on form, color, size of these pattern, we should endeavor to dress well. (6) In side of application, most people is concerned in not only interior ornament but the costume is high. Costume research by some people of the outside and symbol with interior through the pattern analysis is not only very important but also is due to people culture.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.2
• /
• pp.32-43
• /
• 2014

This study set out to identify the importance of each factor influencing facility selection with a survey among public medical facilities under the category of public buildings and apply the importance of economy, technology and environment with the weighting factor method, thus proposing optimal application plans. The research content of each section can be summarized as follows:1) Estimated energy consumption according to the energy simulation was 65,129MWh/yr, which was 18.7% higher than that according to the calculation equation. Of the energy consumption, more than 80% was used by heating and cooling facilities and construction facilities, and 20% was used by electronics such as medical equipments and in and outdoor lighting. 2) The results of a survey on the factors influencing the importance when selecting a new and renewable energy system reveal that the upper items had a priority in economy, environment, and technology in the descending order and that the lower item shad a priority in initial investments, maintenance and repair costs=energy costs, supply reliability, energy efficiency and $CO_2$ emissions in the descending order. 3) The application alternatives were analyzed in economy, technology, and environment. As a result, a geothermal system turned out to be the most excellent one a cross all the upper and lower comparison items. Of the other systems, a solar thermal system was superior in initial investments, maintenance and repair costs, and energy efficiency, where as a photovoltaic system was superior in energy costs, supply reliability, and $CO_2$ emissions. 4) As for the mixed application ratio among economy, technology, and environment, when the percentage of a geothermal system was approximately 80% or higher in anew and renewable energy system, it was the best and most optimal application plan.

• Journal of Internet Computing and Services
• /
• v.11 no.2
• /
• pp.61-72
• /
• 2010

This paper addresses the problem of moving object localization using Ultra-Wide-Band(UWB) range measurement and the method of location accuracy improvement of the indoor moving object. Unlike outdoor environment, it is difficult to track moving object position due to various noises in indoor. UWB is a radio technology that has attention for localization applications recently. UWB's ranging technique offer the cm accuracy. Its capabilities for data transmission, range accurate estimation and material penetration are suitable technology for indoor positioning application. This paper propose a positioning algorithm of an moving object using UWB ranging technique and particle filter. Existing positioning algorithms eliminate estimation errors and bias after location estimation of mobile object. But in this paper, the proposed algorithm is that eliminate predictable UWB range distance error first and then estimate the moving object's position. This paper shows that the proposed positioning algorithm is more accurate than existing location algorithms through experiments. In this study, the position of moving object is estimated after the triangulation and eliminating the bias and the ranging error from estimation range between three fixed known anchors and a mobile object using UWB. Finally, a particle filter is used to improve on accuracy of mobile object positioning. The results of experiment show that the proposed localization scheme is more precise under the indoor.