• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.83-88
• /
• 2006

Many applications in the area of location-based services and personal navigation require nowadays the location determination of a user not only in outdoor environment but also indoor. To locate a person or object in a building, systems that use either infrared, ultrasonic or radio signals, and visible light for optical tracking have been developed. The use of WiFi for location determination has the advantage that no transmitters or receivers have to be installed in the building like in the case of infrared and ultrasonic based location systems. WiFi positioning technology adopts IEEE802.11x standard, by observing the radio signals from access points installed inside a building. These access points can be found nowadays in our daily environment, e.g. in many office buildings, public spaces and in urban areas. The principle of operation of location determination using WiFi signals is based on the measurement of the signal strengths to the surrounding available access points at a mobile terminal (e.g. PDA, notebook PC). An estimate of the location of the terminal is then obtained on the basis of these measurements and a signal propagation model inside the building. The signal propagation model can be obtained using simulations or with prior calibration measurements at known locations in an offline phase. The most common location determination approach is based on signal propagation patterns, namely WiFi fingerprinting. In this paper the underlying technology is briefly reviewed followed by an investigation of two WiFi positioning systems. Testing of the system is performed in two localization test beds, one at the Vienna University of Technology and the second at the Hong Kong Polytechnic University. First test showed that the trajectory of a moving user could be obtained with a standard deviation of about ${\pm}$ 3 m.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.1
• /
• pp.31-36
• /
• 2009

This paper presents a novel scalar adaptive filter, which is reformulated by additional acceleration term. The filter continuously estimates three different kinds of covariance such as the measurement noise covariance, the velocity error covariance and the acceleration error covariance. For estimating three covariances, we use the innovation method for the measurement noise covariance and the least square method for other covariances. In order to verify the proposed filter performance compared with the conventional scalar adaptive filter, we make indoor experimental environment similar to outdoor test using the ultrasonic sensors instead of GPS. Experimental results show that the proposed filter has better position accuracy than the traditional scalar adaptive filter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1704-1712
• /
• 1999

This research features efficient detection of obstacles, especially vehicles, in the forward direction of navigation for the development of unmanned automous vehicle. We separate image regions into ground and non-ground planes using the Helmholtz shearing technique in order to reliably exclude regions that do not contain obstacles. We propose a computationally simple and efficient method for the detection of vehicles in the forward direction by analysis of horizontally and vertically projected histograms of residual disparity map obtained from Helmholtz shearing. We have experimented the proposed method on real outdoor stereo data. Experimental results show that our method gives accurate detection of forward vehicles and is computationally very efficient.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.12
• /
• pp.1284-1289
• /
• 2014

In this Paper, outdoor position estimation system was implemented using GPS (Global Positioning System) and INS (Inertial Navigation System). GPS position information has lots of errors by interference from obstacles and weather, the surrounding environment. To reduce these errors, multiple GPS system is used. Also, the Discrete Wavelet Transforms was applied to INS data for compensation of its error. In this paper, position estimation of the mobile robot in the straight line is conducted by EKF (Extended Kalman Filter). However, curve running position estimation is less accurate than straight line due to phase change in rotation. The curve is recognized through the rate of change in heading angle and the position estimation precision of the initial curve was improved by UPF (Unscented Particle Filter). In the case of UPF, if the number of particle is so many that big memory gets size is needed and processing speed becomes late. So, it only used the position estimation in the initial curve. Thereafter, the position of mobile robot in curve is estimated through switching from UPF to EKF again. Through the experiments, we verify the superiority of the system and make a conclusion.

• Spatial Information Research
• /
• v.16 no.4
• /
• pp.455-465
• /
• 2008

Augmented reality (AR) has tremendous potential in visualizing geospatial information, especially on the actual physical scenes. However, to utilize augmented reality in mobile system, many researches have undergone with GPS or ubiquitous marker based approaches. Although there are several papers written with vision based markerless tracking, previous approaches provide fairly good results only in largely under "controlled environments." Localization and tracking of current position become more complex problem when it is used in indoor environments. Many proposed Radio Frequency (RF) based tracking and localization. However, it does cause deployment problems of large RF-based sensors and readers. In this paper, we present a noble markerless AR approach for indoor (possible outdoor, too) navigation system only using monoSLAM (Monocular Simultaneous Localization and Map building) algorithm to full-fill our grand effort to develop mobile seamless indoor/outdoor u-GIS system. The paper briefly explains the basic SLAM algorithm, then the implementation of our system.

• Journal of Digital Convergence
• /
• v.15 no.11
• /
• pp.77-83
• /
• 2017

The Korea Expressway Corporation announced that road casualties on expressways in 2016 were 262 deaths, a 24% decrease compared to 343 deaths in 2015, thanks to the expansion of rest areas for sleepy drivers. And the installation of large-sized banners containing strong messages such as "dozing while driving means your death" helped to reduce the casualty caused by driving while drowsy by 35% compared to that in 2015. Accordingly, this study tried to analyze the impact of public advertisements designed to prohibit dozing while driving on expressways upon drivers, and to present a direction for improvement of such public advertisements in the future. Based on case studies and library researches, the study contemplated the effects of public advertisements on expressways at home and abroad. It was confirmed that the accident rate has been higher on straight roads than on curved roads and that the framing of negative messages using provocative images or slogans on traffic accidents has been considerably effective. In conclusion, if the installation of outdoor billboards for public advertisements at rest areas for sleepy drivers is institutionalized and the systematic provision of information by road section inside and outside of vehicles via Variable Message Sign (VMS) services on expressways, outdoor billboards, or navigation services (including smartphones) is available, it would be possible to maximize the effect of the public advertisements.

• Journal of the Korean Geographical Society
• /
• v.45 no.1
• /
• pp.144-164
• /
• 2010

This study aims to reveal path selection strategies and individual differences in a navigation task. Two experiments were presented that studied human route planning performance as well as the cognitive strategies and processes involved. For the outdoor task, university students were asked to select a route based on the instruction, i.e. to find the best route from the campus main gate to the Education Building for conference visitors by locating eight signposts. Results indicate (1) that locations of signposts were selected preferably at decision points where the traveler needs to make a choice and starting/ending points of the navigation task and (2) a variety of route planning strategies considering efficiency goal (e.g., the shortest path), environmental characteristics (e.g., fewest turns), and aesthetic purpose (e.g., most scenic) were used. It is notable that some participants took into account more than one path by locating one or two signposts on an alternative route while others preferred a linear route connecting signposts between the start point and the destination. Prior to the main experiment, the same participants were asked to complete the same task inside the classroom to investigate changes in strategies between two tasks. Participants often tend to place signposts at more regular intervals for the indoor navigation task than the same task conducted outside.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.200-204
• /
• 2008

In this paper, to solve localization problem for out-door navigation of robotic vehicles, a particle filter based 3D object recognition framework that can estimate the pose of a building or its entrance is presented. A particle filter framework of multiple evidence fusion and model matching in a sequence of images is presented for robust recognition and pose estimation of 3D objects. The proposed approach features 1) the automatic selection and collection of an optimal set of evidences 2) the derivation of multiple interpretations, as particles representing possible object poses in 3D space, and the assignment of their probabilities based on matching the object model with evidences, and 3) the particle filtering of interpretations in time with the additional evidences obtained from a sequence of images. The proposed approach has been validated by the stereo-camera based experimentation of 3D object recognition and pose estimation, where a combination of photometric and geometric features are used for evidences.

• Journal of Advanced Navigation Technology
• /
• v.13 no.5
• /
• pp.677-683
• /
• 2009

In this study, we designed and implemented testbed for localization algorithm by using a area reduction method in outdoor environment. The proposed algorithm used 3 steps of area reduction method, which estimated blind nodes position. Also, we have experimented with using a Zigbee module for 5 fixed reference nodes and 4 blind nodes in sensor field of $60m{\times}23m$. The results show that our algorithm is improved the localization accuracy even at the number of ref. node is fixed and the number of blind node is increased. In future research, we will be adding the function of seamless localization in indoor and NLOS(non-line of sight) environment.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.415-422
• /
• 2020

Federal Communications Commissions (FCC) has adopted a new rule that can provide a 1,200 MHz unlicensed spectrum to maximize the public benefits in the 5.925 ~ 7.125 GHz(6 GHz) band by expanding unlicensed broadband into the 6 GHz band while also ensuring that licensed services that operate in the band continue to thrive. In Korea, the M/W band of 6 GHz has been reallocated to introduce unlicensed services in the 6 GHz band. Considering the national interests, the entire 1,200 MHz will be supplied for the indoor uses, but only the 500 MHz of the lower bandwidth (5925 ~ 6425 MHz) will for the outdoor uses under the limited power to protect the incumbent services. The introduction of unlicensed devices is being actively promoted through the reallocation of the 6 GHz M/W band, but since it is desperately necessary to prepare technical requirements to operate them in Korea. In this paper, the US 6 GHz unlicensed rules has been analyzed, these results will be utilized for establishing Korean technical standards with the unlicensed spectrum expansion.