• Asia pacific journal of information systems
• /
• 제30권2호
• /
• pp.439-456
• /
• 2020

In online shopping, "out-of-stock" and "sold-out" are used to indicate product unavailability, and this unavailability and its effects on consumers' behaviors have been studied with great interest for practical purposes. However, few studies have specifically discussed out-of-stock and sold-out products in the same paper. We hypothesized that consumers might cognitively interpret items marked out-of-stock and sold-out differently, and in this paper, we studied these potential differences from the perspectives of consumers' emotions, behaviors, and loyalty based on the stimulus-organism-response framework. In order to explore the differences, we used a multi-method approach that consisted of experiments, surveys, and interviews. Specifically, we built an experimental website on which the same products were categorized as either out-of-stock or sold-out, and we measured the participants' emotions, attitudes, and intentions after the experiment. After two weeks, we conducted interviews to confirm our results and to learn more about consumers' everyday behavior. In the results, males and females demonstrated differences in emotion, behaviors, and loyalty with the interaction effects of an item's being marked out-of-stock versus sold-out. We found that the consumers demonstrated different levels of loyalty based on whether the item was marked out-of-stock or sold-out. We discuss the strategic implications of our findings.

• East Asian Economic Review
• /
• 제23권4호
• /
• pp.333-351
• /
• 2019

We use a data-mining bootstrap procedure to investigate the predictability test in the eight Asia-Pacific regional stock markets using in-sample and out-of-sample forecasting models. We address ourselves to the data-mining bias issues by using the data-mining bootstrap procedure proposed by Inoue and Kilian and applied to the US stock market data by Rapach and Wohar. The empirical findings show that stock returns are predictable not only in-sample but out-of-sample in Hong Kong, Malaysia, Singapore, and Korea with a few exceptions for some forecasting horizons. However, we find some significant disparity between in-sample and out-of-sample predictability in the Korean stock market. For Hong Kong, Malaysia, and Singapore, stock returns have predictable components both in-sample and out-of-sample. For the US, Australia, and Canada, we do not find any evidence of return predictability in-sample and out-of-sample with a few exceptions. For Japan, stock returns have a predictable component with price-earnings ratio as a forecasting variable for some out-of-sample forecasting horizons.

• 대한안전경영과학회지
• /
• 제6권2호
• /
• pp.211-229
• /
• 2004

The basis of cyber trading has been sufficiently developed with innovative advancement of Internet Technology and the tendency of stock market investment has changed from long-term investment, which estimates the value of enterprises, to short-term investment, which focuses on getting short-term stock trading margin. Hence, this research shows a Short-term Stock Price Forecasting System on Learning Agent System using DTA(Decision Tree Algorithm) ; it collects real-time information of interest and favorite issues using Agent Technology through the Internet, and forms a decision tree, and creates a Rule-Base Database. Through this procedure the Short-term Stock Price Forecasting System provides customers with the prediction of the fluctuation of stock prices for each issue in near future and a point of sales and purchases. A Human being has the limitation of analytic ability and so through taking a look into and analyzing the fluctuation of stock prices, the Agent enables man to trace out the external factors of fluctuation of stock market on real-time. Therefore, we can check out the ups and downs of several issues at the same time and figure out the relationship and interrelation among many issues using the Agent. The SPFA (Stock Price Forecasting System) has such basic four phases as Data Collection, Data Processing, Learning, and Forecasting and Feedback.

• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.52-58
• /
• 1996

This paper described on the effect of residual stocks in internal grinding of tungsten carbide materials in order to improve the grinding efficiency as well as grinding accuracy. Through the fundamental investigation is carried out for tungsten carbide materials using electroplated diamond wheel, the residual stock after grinding process is effective to the grinding efficiency. The obtained results are as follows: (1) Under the depth of cut(t) is constant and decreasing the workpiece velocity(Vw), the residual stock after grinding is increased, but the difference is little less than the difference by table speed. (2) Increasing the wheel velocity, the residual stock after grinding is decreased. Therefore in order to minimize the residual stock, the wheel velocity should be increased as far as possible. (3) The surface roughness and out-of roundness increased with depth of cut and table speed, and decreased with wheel velocity, but it may as well adopt as much as possible under the dimensional tolerance which is required for high efficiency grinding. (4) In order to remove residual stock, the spark-out grinding shoule be done, and it also can be improved about 20~25% throughout spark-out grinding, and the number of optimal spark-out times were within 10 times.

• 대한안전경영과학회지
• /
• 제20권3호
• /
• pp.37-46
• /
• 2018

According to enhancement of roles and functions of enterprises' distribution centers, recent trend of distribution centers are specialization and diversification which have generated lots of new distribution center building or expansion of the existing ones and led attention on stock transfer importance in case of distribution center relocation. This thesis is a study for how to reduce stock transfer leadtime in order to minimize business risk and how to increase inventory accuracy when stock ownership is transferred in case of distribution center relocation, and to provide inventory accuracy management methods and inventory in/out management types, detailed definition to evaluate level for inventory accuracy management and pros/cons by inventory in/out management type assuming 'the higher inventory accuracy before stock transfer, the shorter stock transfer leadtime when distribution center is relocated'. This thesis provides detailed procedure to secure an absolute stock transfer leadtime and process to confirm hugh inventory accuracy by stakeholders which should be sloved by Task Force Team for stock transfer in case of distribution center relocation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.39-43
• /
• 1996

This paper described on the effect of residual stocks in internal grinding of tungsten carbide materials in order to improve the grinding efficiency as well as grinding accuracy. Though the fundamental investigation is carried out for tungsten carbide materials using electroplated diamond wheel, the residual stock after grinding process is effective to the grinding effciiency. The obtained results are as follows: (1) Under the depth of cut(t) is constant and decreasing the workpiece velocity(Vw), the resiudal stock after grinding is increased, but the difference is little less than the difference by table speed. (2) Increasing the wheel velocity, the residual stock after grinding is decreased. Therefore in order to minimize the residual stock, the wheel velocity should be increased as far as possible. (3) The surface foughness and out-of roundness increased with depth of cut and table speed, and decreased with wheel velocity, but it may as well adopt as much as polssible under the dimensional tolerance which is required for high efficiency grinding. (4) In order to remove residual stock, the spark-out grinding shoule be done, and it also can be improved about 20 .approx. 25% throughout spark-out grinding, and the number of optimal spark-out times were within 10 times.

• 한국유통학회지:유통연구
• /
• 제16권4호
• /
• pp.29-64
• /
• 2011

상품의 이용가능성은 소비자 욕구를 충족시킬 수 있는 중요한 점포 능력 중의 하나이다. 그러나 구매하고자 하는 상품이 없는 품절(stockouts)상황이 발생했을때 소비자는 구매의사 결정의 어려움에 직면하고 이러한 어려움은 소비자의 부정적인 반응, 예컨대 점포에 대한 불만족을 야기한다. 본 연구에서는 상품의 이용가능성 상설, 즉 품절상황에서의 소비자 대체선택행동을 이끌어 내는 결정요인들을 파악하여, 이러한 변수들이 품절에 대한 소비자반응과 행동에 어떠한 영향을 미치는가를 규명하고자 한다. 세부적으로 본 연구에서는 기존 연구들과 달리 구매환경의 상황적인 특성(예: 구매 긴급성, 당황정도), 점포 특성(예: 상품구색, 매장편의성), 소비자 특성(예: 브랜드애호도, 점포애호도) 등에 초점을 맞추어 이러한 요인들이 품절시 소비자반응(상품대체, 구매연기, 점포전환 등의 대체선택행동)에 미치는 영향을 실증적으로 밝히는 것을 목적으로 하였다. 특히 본 연구에서는 선행연구에 비해 상품구색, 전반적인 점포 가격 이미지 등의 점포특성 변수들을 추가적으로 고려하여 분석하였다. 이러한 연구목적을 달성하기 위하여 대형할인마트, 슈퍼마켓 등의 다양한 소매업태에서 품절상황을 경험하고 나오는 353명의 소비자들로부터 자료를 수집하여 다항로짓분석(multinomial logit analysis)을 이용하여 연구모형과 연구가설을 검증하였다. 소비자 선택행동에 대한 MNL 모델 추정결과 품절상황에서 상품대체, 구매연기, 점포전환 행동에 대해 구매의 긴급성, 당황 정도, 구매량, 사전 계획구매, 상품구색, 전반적 점포가격 이미지, 브랜드애호도, 점포애호도 요인들이 소비자 선택행동에 유의한 영향을 미치는 것으로 나타났다. 구체적으로 살펴보면, 품절상황시 소비자의 점포 내 상품대체행동을 이끄는 결정요인으로 구매의 긴급성, 당황정도, 구매량, 사전 계획구매, 상품구색의 다양성, 저렴한 점포가격이미지, 브랜드애호도, 점포애호도 등이 유의하였으며, 구매연기를 유도하는 결정요인으로 구매의 긴급성, 구매량, 브랜드애호도 등으로 판명되었다. 품절시 소비자가 다른 점포로 전환하게 하는 요인은 구매의 긴급성, 구매량, 사전 계획구매, 상품구색의 다양성, 저렴한 점포가격이미지, 브랜드애호도, 점포애호도 등으로 파악되었다. 마지막으로 품절시 점포 편의성과 판매원 서비스 요인들은 소비자 대체 행동에 유의한 영향을 주지 못하였다.

• 한국경영과학회지
• /
• 제21권3호
• /
• pp.197-214
• /
• 1996

Financial analysis of stock data usually involves extensive computation of large amount of time series data sets. To handle the large size of the data sets and complexity of the analyses, database management systems have been increasingly adaopted for efficient management of stock data. Specially, relational database management system is employed more widely due to its simplistic data management approach. However, the normalized two-dimensional tables and the structured query language of the relational system turn out to be less effective than expected in accommodating time series stock data as well as the various computational operations. This paper explores a new data management approach to stock data management on the basis of an object-oriented database management system (ODBMS), and proposes a data model supporting times series data storage and incorporating a set of financial analysis functions. In terms of functional stock data analysis, it specially focuses on a primitive set of operations such as variance of stock data. In accomplishing this, we first point out the problems of a relational approach to the management of stock data and show the strength of the ODBMS. We secondly propose an object model delineating the structural relationships among objects used in the stock data management and behavioral operations involved in the financial analysis. A prototype system is developed using a commercial ODBMS.

• 아태비즈니스연구
• /
• 제13권4호
• /
• pp.45-59
• /
• 2022

Purpose - This study investigates the performance of investment strategies incorporating estimated stock market cycle based on a lead-lag relationship between business cycle and stock market cycle, thereby deriving empirical implications on risk management. Design/methodology/approach - The data period ranges from June 1953 to September 2022 and de-trended short rate, term spread, credit spread, stock market volatility are considered as major input variables to estimate business cycle and stock market cycle by applying probit model. Based on the estimated stock market cycle, two types of strategies are constructed and their performance relative to the benchmark is empirically examined. Findings Two types of strategies based on stock market cycle are considered: The first strategy is to long(short) on stocks when stock market stage is expected to be an expansion(a recession), and the second one is to long on stocks(bonds) when expecting an expansion(a recession). The empirical results show that the strategies based on stock market cycle outperforms a simple buy and hold strategy in both in-sample and out-of-sample investigation. Also the out-of-sample evidence suggests that the second strategy which is in line with asset allocation is more profitable than the first one. Research implications or Originality The strategies considered in this study are based on the estimated stock market cycle which only depends on a few easily available financial variables, thereby making easier to establish such a strategy. It implies that investors enhance investment performance by constructing a relatively simple trading strategies if they set their position on stocks or choose which asset class to buy conditioning on stock market cycle.

• 산경연구논집
• /
• 제10권1호
• /
• pp.29-37
• /
• 2019

Purpose - We study the dynamic linkages of the economic policy uncertainty (EPU) in the US on the manufacturing stock market returns in Korea. In detail, we examine the casual link between EPU index in the US and the manufacturing stock indexes in Korea. Research design, data, and methodology - We measure mainly the distribution effect of the US EPU on the manufacturing stock market in Korea of 1990-2017 by the vector error correction model (VECM). Result - In result, we estimate the impact of the US EPU index has significantly a negative response to the manufacturing stock market in Korea such as non-metal stock index, chemical stock index, food stock index, textile·clothes stock index, automobile·shipbuilding stock index, machinery stock index, steel·metal stock index. Also the remaining variables such as electric·electronics stock index, S&P 500, and producer price index in Korea have a negative relationship with US EPU index. Conclusions - We find out that the relationship between EPU index of the US and the manufacturing stock market in Korea has the negative relationships. We determine the EPU of the US has the spillover effect on the industry stock markets in Korea.