• 산업기술연구
• /
• 제19권
• /
• pp.51-57
• /
• 1999

This research has an object to find out how the position of inlet valve influence swirling and tumbling of turbulence inside the combustion chamber of 4 valve engine. The computational analysis of three dimensional complicated turbulence flow in the cylinder is done by the KIVA-3V program to carry out this object. One use 6 valve positions with the bowl type of piston cavity. The swirl ration and the tumbling ratio of flow filed are evaluated quantitatively to find out how each valve position influence flow phenomena in the combustion chamber during the intake and compression processes.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.25-28
• /
• 2000

Gaze detection is to find out the position on a monitor screen where a user is looking at, using the computer vision processing. This System can help the handicapped to use a computer, substitute a touch screen which is expensive, and navigate the virtual reality. There are basically two main types of the study of gaze detection. The first is to find out the location by face movement, and the second is by eye movement. In the gaze detection by eye movement, we find out the position with special devices, or the methode of image processing. In this paper, we detect not the iris but the pupil from the image captured by Head-Mounted Camera with infra-red light, and accurately locate the position where a user looking at by A(fine Transform.

• Archives of Plastic Surgery
• /
• 제34권1호
• /
• pp.44-51
• /
• 2007

Purpose: Blow-out fracture is one of the most common fractures in facial trauma. It is diagnosed by Computed Tomography(CT) scan, which is considered as the most effective diagnostic tool. Since, the Picture Archiving Communication System(PACS) has been provided recently to many hospitals, doctors are more familiar with imaging software of PACS. Because this software has many useful measuring tools, doctors can measure orbital structure easily and make a plan for treatment with its data. Therefore, authors intended to analyze the data of orbital structure measured with PACS imaging software and evaluate its usefulness. Methods: The charts and CT images of 100 patients, which were 50 patients with medial wall fracture and 50 patients with floor fracture, were reviewed. Patients were selected by pre-determined criteria and their CT images were measured with image software of PACS. 'Extraocular muscle thickness', 'Defect ratio'(ratio of defect area to normal area) and 'Globe position index' were measured and analyzed statistically. Results: The thickness of inferior rectus muscle and medial rectus muscle was simultaneously increased in acute-stage of blow-out fracture. The medial rectus muscle was more thickened in medial wall fracture and inferior rectus was more thickened in floor fracture, respectively. In acute blow-out fracture, globe position is exophthalmic rather than enophthalmic. Especially in floor fracture, numerical value summed up thickness of all extraocular muscle is correlated to the defect ratio and globe position index. Conclusion: Clinicians can decide globe position or presume defect ratio in inferior wall fracture by measurement of CT image in acute blow-out fracture using PACS.

• 대한치과의사협회지
• /
• 제10권2호
• /
• pp.91-96
• /
• 1972

The tests on the oral capacties which are divided into five groups on centric occlusion position, physiologic rest position, two mm open bite position, four mm open bite position, and maximum opening position of the mandible were conducted on the one hundread normal dental college students and staffs. The aims were to study the changeability of the fundamental oral structure, to get some helpful informations for the full denture wearers and related physiology, and also to find out further experimental standards. The results were as follows; 1. There was also some volumetric space in centric occlusion position. 2. The greater the voluntary opening degree of the mandible was, the greater the oral volumetric capacity was. 3. There were no correlations between the oral capacity and height, weight, and cheek thickness. 4. There were no correlations between the centric occlusion position and physiologic rest position, and voluntary positions of the mandible. 5. The inserted material into the oral cavity was much influential to the physiologic rest position.

• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.160-168
• /
• 2000

Hydroforming is a metal forming process that enables circular metal tubes to be formed in to the parts with the complex cross section along the curved axial direction. Recently this hydroforming process is largely used for the production of the automotive parts. This paper presents the results of tube bending and hydroforming simulations in cases of the varying weld line positions of the tube. Ten cases of prebending and hydroforming simulations are carried out to find the optiaml weld line position.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.931-938
• /
• 2016

Application of vector control scheme for consumer products is enlarging to improve control performance. For the field-oriented control, accurate position detection is essential and generally requires expensive sensors. On the other hand, cost-reduction is important in home appliances, so that binary-type Hall-effect sensors are commonly used rather than using an expensive sensor such as an encoder. The control performance is directly influenced by the accuracy of the position information, and there exist non-uniformities related to Hall sensors in electrical and mechanical aspects, which result in distorted position information. Therefore, to get high-precision position information from low-resolution Hall sensors, this paper proposes a new position estimator consisting of a Kalman filter and feedforward compensation scheme, which generates a linearly changing position signal. The efficacy of the proposed scheme is verified by simulation and experimental results carried out with a 48-pole permanent magnet motor.

• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.31-36
• /
• 2010

SAI(Secondary Air Injection) system has been studied widely as one of the promising countermeasure for reducing HC emission at cold start. In this paper, in order to find out the optimal position of SAI, computational thermal fluid analysis on exhaust system adapted SAI system is performed using commercial 3-D CFD code, CFX. The present results showed that SAI position strongly affected the uniformity of air distribution in front of catalyst. And also through the decision process of optimal position of SAI, new index, uniformity of air distribution($U_{\phi}$) is proposed to define it quantitively. Because $U_{\phi}$ is very simple equation and similar with flow uniformity, it is very easy to figure out the physical meaning and to apply it to practices. Finally, we applied the index $U_{\phi}$ to the decision process of the optimal position of SAI, so that we could get the clear comparison results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.484-487
• /
• 1997

The dicing is a process of gaining chip from a wafer. It is done by some mechanism to lengthwise and crosswise. Here, it is focused on measuring a depth of the wafer hefore a process of the dicing. First of all, it checks a precise outer position for the wafer on table to gain the chip. Second, the xafer should he lined after Imowing how much depth, it is in out of the outer position of the wafer. Here suggests that there are a composition of mechanical system, how to measure a depth out of scriber axis, a result from testing.

• Journal of Power Electronics
• /
• 제5권1호
• /
• pp.11-19
• /
• 2005

This paper describes the two control techniques to perform the sensorless vector control of a PMSM by injecting the high frequency voltage to the stator terminal. The first technique is the estimation algorithm of the initial rotor position. A PMSM possesses the saliency which produces the ellipse of the stator current when the high frequency voltage is injected into the motor terminal. The major axis angle of the current ellipse gives the rotor position information at a standstill. The second control technique is a sensorless control algorithm that injects the high frequency voltage to the stator terminal in order to estimate the rotor position and speed. The rotor position and speed for sensorless vector control is calculated by appropriate signal processing to extract the position information from the stator current at low speeds or standstill. The proposed sensorless algorithm using the double-band hysteresis controller exhibits excellent reference tracking and increased robustness. Experimental results are presented to verify the feasibility of the proposed control schemes. Speed, position estimation and vector control were carried out on the floating point processor TMS320VC33.

• Spatial Information Research
• /
• 제9권2호
• /
• pp.263-275
• /
• 2001

NGIS 사업으로 구축된 1/1,000 수치지도의 활용이 급증하면서 이를 활용하기에 앞서 수치지도의 위치정확도 검증이라는 문제가 대두되고 있다. 본 연구에서는 학교 시설물관리시스템 구축에 기반이 되는 소규모 지역에 대한 1/1,000 수치지도의 위치 정확도를 평가하고, 위치오차가 발생한 지역에 대한 수치지도 수정/갱신 방안을 제시하였다. RTK방법으로 교내 주요건물에 대한 위치오차를 평가해 볼 때, 측량관계법령에서 규정하고 있는 0.5mm 보다 크게 나타났다. 이에 대한 위치정확도 확보방안으로 먼저, 교내에 Static 측량을 실시하여 측량기준점을 선정한 후 기준점으로부터 주요건물에 대한 좌표값을 평가하여 RTK 방법으로 측량한 좌표값과 비교하였다. 두 번째로는 지도를 변환하였으며 그 결과를 RTK 측량성과와 비교하였다. 첫 번째 방법과 두 번째 방법을 검토하여 소규모 적합한 수치지도 위치정확도 확보방안을 제시하였다.