• Structural Engineering and Mechanics
• /
• 제5권4호
• /
• pp.385-398
• /
• 1997

High order finite element have a greater convergence rate than low order finite elements, and in general produce more accurate results. These elements have the disadvantage of being more computationally expensive and often require a longer time to solve the finite element analysis. High order elements have been used in this paper to obtain a new eigenvalue solution with out re-solving the new model. The optimisation of the eigenvalue via the differentiation of the Rayleigh quotient has shown that the additional nodes associated with the higher order elements can be condensed out and solved using the original finite element solution. The higher order elements can then be used to calculate an improved eigenvalue for the finite element analysis.

• 제어로봇시스템학회지
• /
• 제1권1호
• /
• pp.50-50
• /
• 1995

It has been pointed out in the literature that the Routh approximation method for order reduction has limitations in treating transfer functions with the denominator-numerator order difference not equal to one. The purpose of this paper is to present a new algorithm based on the Routh approximation method that can be applied to general rational transfer functions, yielding reduced models with arbitrary order.

• 한국해양공학회지
• /
• 제34권6호
• /
• pp.406-418
• /
• 2020

In this study, a nonlinear wave simulation code is developed using a higher-order spectral (HOS) method. The HOS method is very efficient because it can determine the solution of the boundary value problem using fast Fourier transform (FFT) without matrix operation. Based on the HOS order, the vertical velocity of the free surface boundary was estimated and applied to the nonlinear free surface boundary condition. Time integration was carried out using the fourth order Runge-Kutta method, which is known to be stable for nonlinear free-surface problems. Numerical stability against the aliasing effect was guaranteed by using the zero-padding method. In addition to simulating the initial wave field distribution, a nonlinear adjusted region for wave generation and a damping region for wave absorption were introduced for wave generation simulation. To validate the developed simulation code, the adjusted simulation was carried out and its results were compared to the eighth order Stokes theory. Long-time simulations were carried out on the irregular wave field distribution, and nonlinear wave propagation characteristics were observed from the results of the simulations. Nonlinear adjusted and damping regions were introduced to implement a numerical wave tank that successfully generated nonlinear regular waves. According to the variation in the mean wave steepness, irregular wave simulations were carried out in the numerical wave tank. The simulation results indicated an increase in the nonlinear interaction between the wave components, which was numerically verified as the mean wave steepness. The results of this study demonstrate that the HOS method is an accurate and efficient method for predicting the nonlinear interaction between waves, which increases with wave steepness.

• 유통과학연구
• /
• 제14권5호
• /
• pp.107-114
• /
• 2016

Purpose - Loading can decrease the productivity due to the possibility of carrying out with the opposite order of storage in container terminal. When the container is to be taken out, it is needed to move the container stacked upon the container to be carried out to other place temporarily. It is called as rehandling. Remarshalling, with the loading plan, is the arranging the containers before the ship arrives in order to avoid the rehandling during the carrying out. The present study tried to find out the factors affecting the efficiency when building the remarshalling plan with the utilization of neighboring storage space as a outer slot, and analyzed the efficiency of several remarshalling algorithms with the combination of those factors. Research design, data and methodology - The present study used, when the remarshalling plan is prepared for utilizing the outer slot, the simulation methods in order to compare the efficiency of the remarshalling algorithms which made with the factors affecting the efficiency. The factors affecting the efficiency are the method of making the child node, method of arrangement, and possibility of application of FIX. In order to analyze the affecting factors on the efficiency, several algorithms are prepared with the combination of production of the child node and the arrangement method with the availability of FIX application. With this algorithm, the effect of the factors on the efficiency after building up of remarshalling plan with the target on the bay with 10 rows, 8 columns, and 10 indices. Results - The method of rearrangement and making of a child node as the factor affecting the efficiency of remarshalling utilization of the outer bay were studied. It is efficient to combine the method of making a child node with MCS in order to reduce the number of moving the containers. For reducing the time in carrying out, it was found that all arrangement methods should be combined with RCS for the efficiency. The result of experiment shows the application of FIX with good result in case of succession ratio. In addition, when FIX was not applied, all of the most combinations resulted in short time in remarshalling. As a result, it can be concluded that the algorithm with proper combination of making the child node and the arrangement can increase the job efficiency based on the importance. Conclusion - The present study suggested and analyzed the algorithms with the combination of the arrangement method, the making of child node, and FIX. It is needed to develop the algorithm to judge the possibility whether the best remarshalling plan can be built or not within the bay in order to find a better method between the two cases such as within the bay and outer the bay. As a method for extending the study on the factors affecting the efficiency, it is possible to find out the way to build the remarshalling plan within the permitted time under any storage situation.

• 한국국방경영분석학회지
• /
• 제24권2호
• /
• pp.43-56
• /
• 1998

This paper focuses on the optimal replacement time of engine modules of the F16 aircraft. Generally, the optimal replacement time of those should be determined to minimize the replacement cost due to out of order and opportunistic replacement cost of operation cost of remaining period. This paper determined the optimal replacement time by using the opportunistic replacement algorithm that is developed by Forbes and Wyatt. Some real data are utilized but a few data is estimated due to limitation of data. As a result, fan module only reaches to the opportunistic replacement time. The optimal replacement time of the fan module is derived as 1740 cycles. Therefore, the optimal replacement policy of engine modules of the F16 is that fan module should be replaced whenever it is out of order under 1740 cycles and whenever core module is out of order over 1740 cycles.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2013년도 추계학술발표대회
• /
• pp.287-289
• /
• 2013

Fast Handover for Proxy Mobile IPv6 (FPMIPv6), a protocol described in RFC 5949, is used to reduce handover latency and minimize packet loss problem occuring in the Proxy Mobile IPv6 (PMIPv6) protocol. However, during the study of implementing FPMIPv6, we found the Out-of-Order Packet (OoOP) problem that occurs in the experiment of FPMIPv6. Since the OoOP is an issue that affects significantly to QoS of the network, in this paper, we analyze the OoOP problem by using network model. The analysis conducts the cause of occurring OoOP problem due to there exist two paths for data transmitted from Correspondent Node (CN) to MN in FPMIPv6.

• 한국영어학회지:영어학
• /
• 제4권2호
• /
• pp.195-227
• /
• 2004

This paper concerns the issue related to the focus phenomena with a particular reference to the two alternating orders (continuous vs. discontinuous orders) in particle constructions in English. To explain the alternation of word order in particle constructions, I will argue that the choice of word order is closely related to the focus property of the object DPs. Following Drubig (2003), I will assume that focus-feature is taken to be a syntactic feature assigned freely to a lexical head in the process of the mapping into Lexical Array (LA) from the lexicon (LEX). I argue that the focus-marked object DP cannot move out of its focus domain and thus the continuous order is derived. In the case of non-focus-marked object DP, however, the object DP moves out of VP in order to receive an appropriate interpretation. As a result, the discontinuous order is derived.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1982년도 추계학술발표회논문집
• /
• pp.51-55
• /
• 1982

The analysis of Korean language by the first order markov source is carried out. The calculated entropy of the first order Markov source is also included. The results presented here are new data. The data can be useful in designing the keyboard pattern of terminal and the automatic discrimination of monosyllable in Korean language.

• 한국통신학회논문지
• /
• 제39B권6호
• /
• pp.350-359
• /
• 2014

최근 급격한 인터넷의 발전으로 효율적인 네트워크관리를 위해 응용 트래픽 데이터 분석의 중요성이 강조되고 있다. 네트워크 관리를 위해 관리자는 트래픽 데이터를 각각 어떠한 응용에서 발생 하였는지 탐지할 수 있어야 한다. 응용을 탐지하기 위한 방법들 중 하나인 통계정보 트래픽 분류방법을 사용하여 트래픽을 분류할 수 있지만, 이러한 통계정보를 그대로 사용하여 분류하기에는 트래픽 수집지점에서 발생하는 패킷 역전, 재전송에 의한 패킷 중복과 같은 문제점들이 있다. 본 논문에서는 응용에서 발생된 트래픽의 탐지 및 분석률 향상을 위해 패킷 역전 문제와 재전송에 의한 패킷 중복 문제를 탐지하고 개선하는 방법론을 제안하였다. 이렇게 제안한 개선 방법론을 실제 트래픽 분석 시스템에 적용시킴으로써 응용별 바이트 기준 최대 4%의 탐지 및 분석률 향상을 보였다. 이는 제안한 방법론이 실제 트래픽 망에 부담을 줄 수 있는 heavy 플로우의 분석에 기여함을 확인하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권1호
• /
• pp.79-95
• /
• 2016

In order to improve the Quality-of-Service (QoS) of latency sensitive applications in next-generation cellular networks, multi-path is adopted to transmit packet stream in real-time to achieve high-quality video transmission in heterogeneous wireless networks. However, multi-path also introduces two important challenges: out-of-order issue and reordering delay. In this paper, we propose a new architecture based on Software Defined Network (SDN) for flow aggregation and flow splitting, and then design a Multiple Access Radio Scheduling (MARS) scheme based on relative Round-Trip Time (RTT) measurement. The QoS metrics including end-to-end delay, throughput and the packet out-of-order problem at the receiver have been investigated using the extensive simulation experiments. The performance results show that this SDN architecture coupled with the proposed MARS scheme can reduce the end-to-end delay and the reordering delay time caused by packet out-of-order as well as achieve a better throughput than the existing SMOS and Round-Robin algorithms.