• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.343-343
• /
• 2017

This study was conducted to investigate cropping system using paddy field in 152 cities and counties of Korea. Out of the 152 cities and counties, 106 regions responded(70%). The number of cultivated crops in 2 and 3 cropping system using paddy field was 48 crops. Among these, 35 crops were cultivated in winter and spring, 27 crops were cultivated in summer and fall. There were 33 crops in paddy field after cultivating rice. Among these, 11 crops were cultivated in spring and 26 crops were in fall-winter. There were 44 crops in paddy field without cultivating rice. Among these, 19 crops were cultivated in spring, 27 crops were in summer, 15 crops were in fall. Total cropping systems in Korea were 138 types, 2 cropping system were 119, among them outdoor crops were 77, using facility crops were 42, and 3 cropping system crops were 19. Cropping system of Jeonbuk province was 45 types and it was the most in Korea. Cropping systems of southern area were more various than those of middle-northern area in Korea.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.9
• /
• pp.822-829
• /
• 2002

This paper deals with the distribution characteristics of the current density and axial magnetic flux density for each slits made on the contact electrode in the vacuum interrupter with axial magnetic field type using 3-dimension finite element analysis. It has been known that the presence of an axial magnetic field parallel to the current flow in the arc plasma can increase the high current breaking capacity of vacuum interrupter by carrying out the arc plasma from constricted mode to diffusion mode. The axial magnetic field is created of itself by current flow in the segments of coil electrode behind the contact electrode. The analyzed results show that if the slits are made in the contact electrode, they can increase the current density and axial magnetic flux density in the contact electrode surface and at the gap distance, which is due to decrease the effect of eddy currents flowing in the contact electrode. The phase shift due to eddy currents, defined 3s time difference between the maximum value of current and axial magnetic field, is decreased still more by increasing the number of slits made in the contact electrode at the center point of gap distance. These results demonstrate that 3-dimension finite element analysis has a great deal of merits in the development and evaluation of new electrode at the design of vacuum interrupter.

• International Journal of Railway
• /
• v.1 no.2
• /
• pp.64-71
• /
• 2008

The quality of track-bed fills of railways has been controlled by field measurements of density $({\gamma}_d)$ and the results of plate-load tests. The control measures are compatible with the design procedures whose design parameter is $k_{30}$ for both ordinary-speed railways and high-speed railways. However, one of fatal flaws of the design procedures that there are no simple laboratory measurement procedures for the design parameters ($k_{30}$ or, $E_{v2}$ and $E_{v2}/E_{v1}$) in design stage. A new quality control procedure, in parallel with the advent of the new design procedure, is being proposed. This procedure is based upon P-wave velocity involving consistently the evaluation of design parameters in design stage and the field measurements during construction. The Key concept of the procedure is that the target value for field compaction control is the P-wave velocity determined at OMC using modified compaction test, and direct-arrival method is used for the field measurements during construction. The procedure was verified at a test site and the p-wave velocity turned out to be an excellent control measure. The specifications for the control also include field compaction water content of OMC${\pm}$2% as well as the p-wave velocity.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1057-1062
• /
• 1991

Recently, due to the development of new technology and products, FA has been accelerating for obtaining high-quality and saving of resources and power. Introduction of automation to the field which has bad working condition is needed and welding is one of these field. In this study, solving algorithm for down hand control which requires in the automatic are welding system is proposed. For the verification of the algorithm, numerical examples are shown and visualization is carried out using developed graphic tools.

• Korean Journal of Materials Research
• /
• v.14 no.11
• /
• pp.807-812
• /
• 2004

The uniformity of emission mage and field emission properties of carbon nanotube(CNT) cathodes dependence on CNT particle dispersion were investigated for field emission displays. We used multi-walled carbon nanotubes (MWNTs) synthesized by CVD method as the field emitter materials. CNT dispersion in CNT ink was carried out by ultrasonication and shaking methods. According to CNT dispersion conditions, the uniformity of emission image and field emission properties of CNT cathodes were greatly affected. The smaller particles of filler materials and CNT powders provide the better properties of the CNT cathodes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.11
• /
• pp.1844-1851
• /
• 1997

Displacement fields and interface stresses are obtained by modifying the potential energy functional with a penalty function which enforces the continuity of stresses at the interface of two-materials. Based on the displacement field and the interface stresses, a new methodology to generate a continuous stress field over the entire domain including the interface of the dissimilar materials has been proposed by combining the L$^{2}$ projection method of stress-smoothing and the Loubignac's iterative method of improving the displacement field. Stress analysis was carried out on two examples which are made of highly dissimilar materials. As a result of the analysis, it is found that the proposed method provides improved continuity of the stress field over the entire domain as well as predicting accurate nodal stresses at the interface. In contrast, the conventional displacement-based finite element method provides significant stress discontinuties at the interfaces. In addition, it was found that the total strain energy evaluated from the improved continuous stress field converge to the exact value as increasing the number of iterations in the proposed method.

• Journal of Korean Society of Rural Planning
• /
• v.23 no.1
• /
• pp.21-29
• /
• 2017

The purpose of this study is to analyze the accuracy of cultivated crop database in agricultural farm business using UAV(Unmanned Aerial Vehicle) and field survey over Daesso-myeon, Umsung-gun, Chungbuk. When comparing with agricultural farm business and cadastral maps, Daeso-myeon crop field shows 29.8%(2,030 parcels out of 6,822 parcels) is either mismatched or missing. It covers almost 19.3%($3.4km^2$ of $17.6km^2$) of total farmland. In order to solve these problems, it is necessary to prepare a multifaceted plan including cadastral map. Comparative analysis of the cultivated crop registered in the agricultural farm business and the field survey agreed only in 3,622 parcels in total 6,822 parcels whereas 3200 parcels disagree. Among these disagreed parcels 2,030(29.8%) have been confirmed as unregistered farm business entity. Accuracy of cultivated crop registered in agricultural farm business agreed in 75.6% cases. Especially the paddy field registration is more accurate that other crops. These discrepancies can lead to false payment in agricultural farm business. For exploration and analysis of regional resources, UAV images can be used together with farm business management database and cadastral map to get a clearer grasp over on-site resources and conditions.

• The Korean Journal of Ecology
• /
• v.22 no.5
• /
• pp.265-270
• /
• 1999

A syntaxonomical study about the vegetation of ruined salt field in Chonnam province was carried out and its soil properties were also determined. This study was accomplished by the methods of Mueller-Dombois and Ellenberg. This study was designed to clarify the syntaxonomical and synecological characteristics of the vegetation of ruined salt field in Chonnam province. The annual herbaceous halophyte communities of ruined salt field in Chonnam province were consisted of 5 communities: Salicornia herbacea community, Sueada japonica community, Sueada maritima community, Atriplex gmelini community, Spergularia marina community. And the perennial herbaceous halophyte communities of ruined salt field in Chonnam province were consisted of 3 communities: Aster tripolium community, Carex scabrifolia community, Phragmites communis community. The subsidiary knowledges of this study will make it possible to accumulate information on the distribution pattern of coastal salt marsh vegetation, and also will provide practical information for conservation of coastal ecosystems.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.11
• /
• pp.973-981
• /
• 2013

The main role of an acoustic diffuser is to diffuse reflected sound field spatially. Since the pioneering work of Schroeder, there have been investigations to improve its performance by using shape/sizing optimization methods. In this paper, a gradient-based topology optimization algorithm is newly presented to find the optimal distribution of reflecting materials for maximizing diffuser performance. Time-harmonic acoustic analysis in a two-dimensional acoustic domain is carried out where the domain is discretized by finite elements. Perfectly matched layers are placed to surround the domain to simulate non-reflecting boundary conditions. Design variables are assigned to each element of which material properties are interpolated between those of air and those of a rigid body. An approach to extract the reflected field from the total acoustic field is employed. To validate the effectiveness of the proposed method, design problems are solved at different frequencies. The performance of the optimized diffusers obtained by the proposed method is compared against that of the conventional Schroeder diffusers.

• Journal of Mechanical Science and Technology
• /
• v.17 no.12
• /
• pp.2010-2018
• /
• 2003

Although continuous casting process has highly developed, there still remain many problems to be considered. Specifically, two vortex flows resulting from impingement against narrow walls make a flow field unstable in a mold, and it is directly related to internal and external defects of steel products. To cope with this instability, EMBR (Electromagnetic Brake Ruler) technique has been lately studied for the stability of molten steel flow, and it is revealed that molten steel flow in a mold can be controlled with applied magnetic field. However, it is still difficult to clarify flow pattern in an EMBR caster due to complex correlations among variables such as geometric factors, casting conditions, and the place and the intensity of charged magnetic field. In the present study, flow field in a mold is focused with different conditions of electromagnetic effect. To accurately analyze the case, three dimensional low Reynolds turbulent model and appropriate boundary conditions are chosen. To evaluate the electromagnetic effect in molten steel flow, dimensionless numbers are employed. The results show that the location and the intensity of the applied magnetic field significantly influence the flow pattern. Both impingement and internal flow pattern are changed remarkably with the change of the location of applied magnetic field. It turns out that an insufficient magnetic force yields adverse effect like channeling, and rather lowers the quality of steel product.