• 대한기계학회논문집B
• /
• 제38권3호
• /
• pp.219-225
• /
• 2014

본 연구에서는 NACA0012/14/15 천음속 에어포일 유동에서 비평형 응축이 충격파 진동에 미치는 영향을 TVD 수치해석을 통하여 연구하였다. 주류 마하수 0.81-0.90에 대해, 정체점 상대습도 및 에어포일의 기하학적 형상이 유동 특성에 미치는 영향이 구명되었다. 받음각 ${\alpha}=0^{\circ}$, 정체점 온도(288K) 및 주류 마하수가 0.87인 경우, 정체점 상대습도의 증가는 Terminating Shock의 충격파 강도를 약화시킨다. 정체점 상대습도가 30%인 경우 961Hz이던 충격파의 진동수가 60%일 때는 912Hz로 약 5% 감소한다. 정체점 상대습도가 동일한 경우는 주류 마하수가 클수록 충격파의 진동수 및 이동거리는 크게 된다. 또, 진동의 한 주기에 대해 항력계수의 변화도 구명되었다. 정체점 상대습도가 높을수록 최대 항력 계수는 작고, 항력계수의 변화폭 또한 감소한다. 한편 에어포일의 최대 두께가 두꺼울수록 초음속 영역의 크기는 증가하며 충격파의 진동수 및 이동거리도 증가한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전력기술부문
• /
• pp.202-203
• /
• 2007

STATCOM은 계통에 무효 전력을 공급함으로써 모선 전압을 유지시키는 역할을 한다. 따라서 발전기들의 회전자 위상각과 같은 유효전력과 관련된 계통 변수들의 제어 능력은 없다. 그러나 여자기에 PSS와 같은 제어기를 설치하여 발전기 회전자 진동을 제어하는 것처럼 STATCOM에도 이러한 제어기를 설치함으로써 부가적인 효과를 얻을 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.270-271
• /
• 2006

This paper presents the reclosing algorithm considering the DG(Distributed Generation). The algorithm consists of angle oscillation's judgment, EEEAC(Emergency Extended Equal-Area Criterion), calculation of optimal reclosing time and reconnection algorithm. The simulation is implemented for the three different DG technologies by using EMTP MODELS.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.222-223
• /
• 2001

Optical parametric oscillator(OPO) has been used to generate coherent and tunable laser source with birefringent phase-matching technique in various nonlinear materials. In birefringent phase-matching, the output wavelength is controlled with angle or temperature tuning of the refractive index. However these tuning methods have several limitations such as restriction of tuning wavelength due to reasonable angular and temperature tuning ranges, Poynting vector walk-off which limits the interaction length, and thermal stabilization time. (omitted)

• 대한전자공학회논문지SD
• /
• 제49권8호
• /
• pp.16-21
• /
• 2012

MEMS 기반의 자이로 센서는 회전 각도를 추출하는 과정에서 잡음성분에 의한 누적오차(drift) 및 영점(zero angle) 이탈현상이 발생한다. 본 연구에서는 이러한 누적오차를 제거하기 위한 DCF(Drift Compensatio Filter) 알고리즘과 각도 추출 시영점 이탈 방지를 위한 BACF(Boot Angle Compensation Filter) 알고리즘을 제안한다. DCF 알고리즘은 자이로 센서의 출력값에서 오프셋 및 잡음성분을 제거하여 순수 이동량을 얻을 수 있도록 설계한다. BACF 알고리즘은 자이로 센서로부터 출력되는 오프셋(Offset)에 포함된 잡음 성분을 재귀 평균법으로 계산하여 평균 오프셋을 구한다. 실험환경은 2축 자이로 센서 및 모바일 OIS 카메라가 탑재된 컨트롤 보드를 이용하여 5Hz의 ${\pm}0.5^{\circ}$의 진동에 대하여 BACF 및 DCF 알고리즘을 적용한 결과 누적 오차가 발생하지 않았으며, 영점 각도 추종이 정확히 이루어지는 결과를 확인하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.152-160
• /
• 2004

Studies to investigate the influence on hydraulic acoustic wave were conducted using pressure swirl atomizer under making frequency range from 0 to 60Hz using water as a propellant. Pressure oscillation from hydraulic sources gives a strong influences on atomization and mixing processes. The ability to drive these low frequency pressure oscillations makes spray characteristics changeable. The effect of pressure perturbation and its spray characteristics showed that low injector pressure with pressure pulsation gives more significantly than high injector pressure with pressure perturbation in SMD, spray cone angle, breakup length. Moreover, this data could be used for prediction of low combustion instability getting G factor.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.295-300
• /
• 2005

The freeplay, one of the concentrated structural nonlinearities, is inevitable for control surfaces of a real air vehicle due to normal wear of components and manufacturing mismatches. Also aerodynamic nonlinearities caused by a shock wave occur in transonic region. In practice, these nonlinearities induce the limit cycle oscillation (LCO) and decrease the transonic flutter speed. In this study, the fictitious mass method is used to apply a modal approach to nonlinear structural models due to freeplay. The transonic small-disturbance (TSD) equation is used to calculate unsteady aerodynamic forces in transonic region. Nonlinear aeroelastic time responses are predicted by the coupled time integration method (CTIM). This method was also applied to a 3D all-movable control wing to investigate its nonlinear aeroelastic responses. The angle of attack effect on the LCO characteristics has been found to be closely related with the initial pitching moment.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.367-373
• /
• 2008

Spinning detonations propagating in a circular tube were numerically investigated with a one-step irreversible reaction model governed by Arrhenius kinetics. Activation energy is used as parameter as 10, 20, 27 and 35, and the specific heat ratio and the heat release are fixed as 1.2 and 50. The time evolution of the simulation results was utilized to reveal the propagation mechanism of single-headed spinning detonation. The track angle of soot record on the tube wall was numerically reproduced with various levels of activation energy, and the simulated unique angle was the same as that of the previous reports. The maximum pressure histories of the shock front on the tube wall showed stable pitch at Ea=10, periodical unstable pitch at Ea=20 and 27 and unstable pitch consisting of stable, periodical unstable and weak modes at Ea=35, respectively. In the weak mode, there is no Mach leg on the shock front, where the pressure level is much lower than the other modes. The shock front shapes and the pressure profiles on the tube wall clarified the mechanisms of these stable and unstable modes. In the stable pitch at Ea=10, the maximum pressure history on the tube wall remained nearly constant, and the steady single Mach leg on the shock front rotated at a constant speed. The high and low frequency pressure oscillations appeared in the periodical unstable pitch at Ea=20 and 27 of the maximum pressure history. The high frequency was one cycle of a self-induced oscillation by generation and decay in complex Mach interaction due to the variation in intensity of the transverse wave behind the shock front. Eventually, sequential high frequency oscillations formed the low frequency behavior because the frequency behavior was not always the same for each cycle. In unstable pitch at Ea=35, there are stable, periodical unstable and weak modes in one cycle of the low frequency oscillation in the maximum pressure history, and the pressure amplitude of low frequency was much larger than the others. The pressure peak appeared after weak mode, and the stable, periodical unstable and weak modes were sequentially observed with pressure decay. A series of simulations of spinning detonations clarified that the unsteady mechanism behind the shock front depending on the activation energy.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.367-373
• /
• 2008

Spinning detonations propagating in a circular tube were numerically investigated with a one-step irreversible reaction model governed by Arrhenius kinetics. Activation energy is used as parameter as 10, 20, 27 and 35, and the specific heat ratio and the heat release are fixed as 1.2 and 50. The time evolution of the simulation results was utilized to reveal the propagation mechanism of single-headed spinning detonation. The track angle of soot record on the tube wall was numerically reproduced with various levels of activation energy, and the simulated unique angle was the same as that of the previous reports. The maximum pressure histories of the shock front on the tube wall showed stable pitch at Ea=10, periodical unstable pitch at Ea=20 and 27 and unstable pitch consisting of stable, periodical unstable and weak modes at Ea=35, respectively. In the weak mode, there is no Mach leg on the shock front, where the pressure level is much lower than the other modes. The shock front shapes and the pressure profiles on the tube wall clarified the mechanisms of these stable and unstable modes. In the stable pitch at Ea=10, the maximum pressure history on the tube wall remained nearly constant, and the steady single Mach leg on the shock front rotated at a constant speed. The high and low frequency pressure oscillations appeared in the periodical unstable pitch at Ea=20 and 27 of the maximum pressure history. The high frequency was one cycle of a self-induced oscillation by generation and decay in complex Mach interaction due to the variation in intensity of the transverse wave behind the shock front. Eventually, sequential high frequency oscillations formed the low frequency behavior because the frequency behavior was not always the same for each cycle. In unstable pitch at Ea=35, there are stable, periodical unstable and weak modes in one cycle of the low frequency oscillation in the maximum pressure history, and the pressure amplitude of low frequency was much larger than the others. The pressure peak appeared after weak mode, and the stable, periodical unstable and weak modes were sequentially observed with pressure decay. A series of simulations of spinning detonations clarified that the unsteady mechanism behind the shock front depending on the activation energy.

• 한국산학기술학회논문지
• /
• 제14권7호
• /
• pp.3158-3163
• /
• 2013

본 연구에서는 회전속도, 브레이크 압력 제어가 가능한 브레이크 다이나모메타를 제작하여 스퀼 소음 실험을 실시하였다. 브레이크 패드는 각각 $34^{\circ}$, $30^{\circ}$, $26^{\circ}$로 가공하여 패드 각도에 따른 스퀼 발생 조건과 음의 기울기 발생에 따른 스퀼 연관성을 연구 하였다. 각도에 따라 특정한 회전속도와 브레이크 압력에서 스퀼이 발생하였으며, 각도에 상관없이 하모닉 성분을 가지는 특정 주파수 소음을 발견하였다. 햄머링 테스트 및 유한요소해석을 통해서 특정 주파수는 In-plane모드 성격을 갖고 있으며, 패드 각도에 둔감한 모드임을 밝혀냈다.