• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.3
• /
• pp.117-126
• /
• 2018

Due to intelligent transport systems, location-based applications, and augmented reality, demand for image maps and 3D (Three-Dimensional) maps is increasing. As a result, data acquisition using UAV (Unmanned Aerial Vehicles) has flourished in recent years. However, even though orthophoto map production and research using UAVs are flourishing, few studies on 3D modeling have been conducted. In this study, orthophoto and 3D modeling research was performed using various angle images acquired by a UAV. For orthophotos, accuracy was evaluated using a GPS (Global Positioning System) survey that employed VRS (Virtual Reference Station) acquired checkpoints. 3D modeling was evaluated by calculating the RMSE (Root Mean Square Error) of the difference between the outline height values of buildings obtained from the GPS survey to the corresponding 3D modeling height values. The orthophotos satisfied the acceptable accuracy of NGII (National Geographic Information Institute) for a 1/500 scale map from all angles. In the case of 3D modeling, models based on images taken at 45 degrees revealed better accuracy of building outlines than models based on images taken at 30, 60, or 75 degrees. To summarize, it was shown that for orthophotos, the accuracy for 1/500 maps was satisfied at all angles; for 3D modeling, images taken at 45 degrees produced the most accurate models.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.263-270
• /
• 2018

Land surface temperature is known to be an important factor in understanding the interactions of the ground-atmosphere. However, because of the large spatio-temporal variability, regular observation is rarely made. The existing land surface temperature is observed using satellite images, but due to the nature of satellite, it has the limit of long revisit period and low accuracy. In this study, in order to confirm the possibility of replacing land surface temperature observation using satellite imagery, images acquired by TIR (Thermal Infrared) sensor mounted on UAV (Unmanned Aerial Vehicle) are used. The acquired images were transformed from JPEG (Joint Photographic Experts Group) to TIFF (Tagged Image File Format) format and orthophoto was then generated. The DN (Digital Number) value of orthophoto was used to calculate the actual land surface temperature. In order to evaluate the accuracy of the calculated land surface temperature, the land surface temperature was compared with the land surface temperature directly observed with an infrared thermometer at the same time. When comparing the observed land surface temperatures in two ways, the accuracy of all the land covers was below the measure accuracy of the TIR sensor. Therefore, the possibility of replacing the satellite image, which is a conventional land surface temperature observation method, is confirmed by using the TIR sensor mounted on UAV.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.497-500
• /
• 2003

본 연구는 지적행정의 기능과 역할을 확대하기 위한 하나의 방안으로 임야와 농경지를 대상으로 항공사진측량에 의한 수치정사영상지적도의 제작 및 활용방안을 제시하고자 한다.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.85-96
• /
• 2023

The number of traffic accidents caused by wet or icy road surface conditions is on the rise every year. Car crashes in such bad road conditions can increase fatalities and serious injuries. Historical data (from the year 2016 to the year 2020) on weather-related traffic accidents show that the fatality rates are fairly high in Korea. This requires accurate prediction and identification of hazardous road conditions. In this study, a forecasting model is developed to predict the chances of traffic accidents that can occur on roads affected by weather and road surface conditions. Multiple deep learning algorithms taking into account AlexNet and 2D-CNN are employed. Data on orthophoto images, automatic weather systems, automated synoptic observing systems, and road surfaces are used for training and testing purposes. The orthophotos images are pre-processed before using them as input data for the modeling process. The procedure involves image segmentation techniques as well as the Z-Curve index. Results indicate that there is an acceptable performance of prediction such as 65% for dry, 46% for moist, and 33% for wet road conditions. The overall accuracy of the model is 53%. The findings of the study may contribute to developing comprehensive measures for enhancing road safety.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.547-551
• /
• 2004

The purpose of this study is to propose the method that it minimizes a disagree phenomenon when we superpose the digital ortho image on the cadastral map. Through the method, we are to apply the method to app licate and vary the land-relative information maximumly by adding the merit of the digital ortho image to the cadastral map.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.207-217
• /
• 2002

수치정사사진지도를 제작하기 위한 기반 자료로 스캐닝한 수치항공사진영상과 항공사진의 왜곡 보정을 위한 표정, DEM의 추출과 편집 및 편위 수정에 이르기까지 다양한 처리절차가 필요하다. 또한 영상과 벡티 자료의 중첩을 통해 생선한 영상지도의 편집과 지도제작 작업에는 다양한 미적 요소가 필요하다. 본 연구에서는 수치항공사진 영상을 이용하여, 영상에 내포하는 기하학적 변위를 3차원 모델링 결과와 수치표고모델을 이용하여 소거하고, 수치정사사진을 제작한 후에, 1/5,000 수치지도에서 필요한 레이어와 중첩시킨 수치정사사진지도를 제작하여 그 정확도를 분석하였으며, 각 처리 단계별 문제점의 분석과 개선방안을 제시하였다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.393-396
• /
• 2003

본 연구에서는 범용 CAD 시스템에서 정사영상을 이용한 지도제작 가능성 판단을 목적으로 하고 있다. 이를 위해 대전시 일부 지역에 대한 항공사진을 영상화 및 정사 보정하여 범용 시스템에서 판독 가능한 지형 요소를 분석하고 추출하였다. 국립지리원 발행 1/5,000 기준 수치 지도와 비교하여 정성적 및 정량적으로 분석하고 표현상의 문제점을 도출하였으며, 범용 시스템에서 정사영상을 이용한 지도 제작 가능성을 검토하였다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.459-464
• /
• 2004

본 연구는 서로 다른 원점을 가진 구소삼각원점지역과 통일원점지역간의 연속지적도 접합에 있어서 수치지적도를 이용하여 제작한 두 원점지역의 연속지적도 접합도와 최신 항공측량기법으로 생성한 수치정사사진을 중첩ㆍ조정함으로써 상이한 원점으로 제작된 연속지적도 접합에 관한 효율적인 성과 유지 방안을 도출함으로써 국민들에게 측량성과에 대한 신뢰도를 높이고, 도해지적측량의 대안으로 신속하고 정확한 수치적 해석기법의 측량방법을 활용하고자 한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.2
• /
• pp.97-104
• /
• 1999

Digital elevation models(DEMs) represent an important data base for orthophoto generation The quality of a DEM depends on the geometrical accuracy of the original point or line data. This study analyzes the effects of grid space and scanning resolution in DEM creation with image matching method. The less standard deviation of DEM error was introduced when we adopted small grid space, but no effects in scanning resolution. Based on the bias error analysis of the DEM, we found that the error of a large scale of aerial photograph was bigger than that of a small scale case, and that such error mainly came from the closed area in large scale photographs. In order to reduce the closed area, the experiment has been conducted using multi scale and different overlap of aerial photo images. The result shows that the size of closed area and the shaded area has been dramatically decreased due to the adoption of multi scale aerial images instead of a couple of stereo images.

• Spatial Information Research
• /
• v.13 no.1 s.32
• /
• pp.55-63
• /
• 2005

Direct Georeferencing(DG) Is based on the direct measurement of the projection centers and rotation angle of sensor through loading the GPS and INS in aircraft. The methods can offer us to acquire the exterior orientation parameters with only minimum GCPs, even the ground control process could be completely skipped. Hence, as long as securing Digital Elevation Model (DEM), it is feasible to generate digital orthophotos without performing the aerial triangulation with Ground Control Point (GCP) surveying. In this study, the DEM is automatically generated by using a image matching technique based on aerial photos and exterior orientation parameters. This is followed by producing an orthophoto from these results. Finally, accuracy analysis of the georeferencing technique for generating orthoimage indicates that RMS errors of 62cm and 76cm occurred at the X and the Y axis, respectively. This means that the results fulfill the demanding accuracy of the 1:5000 digital map. Hence, it is possible to conclude from this study that the direct georeferencing based orthoimage generation method is able to effectively digital map update.