• Geomechanics and Engineering
• /
• v.8 no.2
• /
• pp.237-255
• /
• 2015

From the related engineering principles, analytical solutions for horizontal crack initiation and propagation on a coal panel floor-underlying strata interface due to coal panel excavation are derived in this paper. Two important concepts, namely the critical panel width of horizontal crack initiation on the panel floor-underlying strata interface and the critical panel width of vertical fracture (crack) initiation in the panel floor, have been presented. The resulting analytical solution indicates that: (1) the first criterion can be used to express the condition under which horizontal plane cracks (on the panel floor-underlying strata interface or in the panel floor because of delamination) due to the mining induced vertical stress will initiate and propagate; (2) the second criterion can be used to express the condition under which vertical plane cracks (in the panel floor) due to the mining induced horizontal stress will initiate and propagate; (3) this orthogonal set of horizontal and vertical plane cracks, once formed, will provide the necessary weak network for the flow of gas to inrush into the panel. Two characteristic equations are given to quantitatively estimate both the critical panel width of vertical fracture initiation in the panel floor and the critical panel width of horizontal crack initiation on the interface between the panel floor and its underlying strata. The significance of this study is to provide not only some theoretical bases for understanding the fundamental mechanism of a longwall floor gas inrush problem but also a benchmark solution for verifying any numerical methods that are used to deal with this kind of gas inrush problem.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.2108-2113
• /
• 2010

The Long Term Evolution (LTE) system is based on the Orthogonal Frequency Division Multiplexing (OFDM) and relies its channel estimation on the lattice-type pilot samples in the multipath fading channel environment. The estimation of the channel frequency response (CFR) makes use of the least squares estimate (LSE) for each pilot samples, followed by an interpolation both in time- and in frequency-domain to fill up the channel estimates for subcarriers corresponding to data samples. Any interpolation scheme could be adopted for this purpose. Depending on the requirements of the target system, we may choose a simple linear interpolation or a sophisticated one. For any choice of an interpolation scheme, these is a trade-off between estimation accuracy and numerical cost. For those wireless communication systems based on the OFDM and the preamble-type pilot structure, the DFT-based channel estimation and its variants have been successfully. Yet, it may not be suitable for the lattice-type pilot structure, since the pilot samples are not sufficient to provide an accurate estimate and it is known to be sensitive to the location as well as the length of the time-domain window. In this paper, we propose a simple interpolated based on the upsampling mechanism in the multirate signal processing. The proposed method provides an excellent alternative to the DFT-based methods in terms of numerical cost and accuracy. The performance of the proposed technique is verified on a multipath environment suggested on a 3GPP LTE specification.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.5
• /
• pp.2400-2413
• /
• 2019

Doubly-selective (DS) fading channel is often occurred in many orthogonal frequency division multiplexing (OFDM) communication systems, such as high-speed rail communication systems and underwater acoustic (UWA) wireless networks. It is challenging to provide an accurate and fast estimation over the doubly-selective channel, due to the strong Doppler shift. This paper addresses the doubly selective channel estimation problem based on complex exponential basis expansion model (CE-BEM) in OFDM systems from the perspective of distributed compressive sensing (DCS). We propose a novel DCS-based improved sparsity adaptive matching pursuit (DCS-IMSAMP) algorithm. The advantage of the proposed algorithm is that it can exploit the joint channel sparsity information using dynamic threshold, variable step size and tailoring mechanism. Simulation results show that the proposed algorithm achieves 5dB performance gain with faster operation speed, in comparison with traditional DCS-based sparsity adaptive matching pursuit (DCS-SAMP) algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.296-301
• /
• 2005

This paper describes the kinematics, dynamics and control of a 6-DOF shaking table with a bell crank structure, which converts the direction of reciprocating movements. In this shaking table, the bell crank mechanism is used to reduce the amount of space needed to install the shaking table and create horizontal displacement of the platform. In kinematics, joint design is performed using $Gr{\ddot{u}}bler's$ formula. The inverse kinematics of the shaking table is discussed. The derivation of the Jacobian matrix is presented to evaluate singularity conditions. Considering the maximum stroke of the hydraulic actuator, collision between links and singularity, workspace is computed. In dynamics, computations are based on the Newton-Euler formulation. To derive parallel algorithms, each of the contact forces is decomposed into one acting in the direction of the leg and the other acting in the plane orthogonal to the direction of the leg. Applying the Newton-Euler approach, the solution of inverse dynamics is almost completely parallel. Only one of the steps-the application of the Newton-Euler equations to the platform-must be performed on one single processor. Finally, the efficient control scheme is proposed for the tracking control of the motion platform.

• Journal of the Korean earth science society
• /
• v.34 no.7
• /
• pp.662-668
• /
• 2013

We examine the effects of El Ni$\tilde{n}$o on tropospheric ozone through the simulation of a Climate-Chemistry model for a 40-year period (1971-2010). The Empirical Orthogonal Function (EOF) analysis reveals that the tropospheric ozone concentration in the central-eastern Pacific decreases when the El Ni$\tilde{n}$o occurs, which is consistent with the observation. However, the increase of ozone over Indian Ocean-Indonesia regions is weak in the simulation compared to the observations. We analyze details of the 2006 El Ni$\tilde{n}$o event to understand the mechanism that caused the change of ozone due to El Ni$\tilde{n}$o. It is found that enhanced convection as well as higher water vapor followed by shortened lifetime has led to lower the tropospheric ozone. Downward motion induced by the changes of atmospheric circulation due to sea surface temperature forcing, together with the decrease of water vapor, has brought ozone produced in the upper troposphere over the Indian Ocean.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.3
• /
• pp.279-288
• /
• 2012

The material removal mechanism in machining is significantly affected by the cutting edge geometry. Its effect becomes even more substantial when the depth of cut is relatively small as compared to the characteristic length which represents the shape and size of the cutting edge. Conventionally, radius or focal length has been employed as the characteristic length with the assumption that the shape of cutting edge is round or parabolic. However, in reality, there could be various ways to determine the radius or focal length even for the same tool edge profile, depending on the region to be considered as cutting edge in the measured profile and the constraints to be set in constructing the best fitted circle or parabola. In this regard, the present study proposes various models to determine the characteristic length in terms of radius or focal length. Their physical compatibility are validated by carrying out 2D orthogonal cutting experiments using inserts with a wide range of characteristic length ($30{\sim}180\;{\mu}m$ in terms of radius) and then by investigating the correlation between the characteristic length and the cutting forces. Such validation is based on the common belief that the larger the characteristic length is, the blunter the cutting edge is and the higher the cutting forces are. Interestingly, the results showed that the correlation is higher for the radius or focal length obtained with a constraint that the center of best fitted circle or the focus of the best fitted parabola should be on the bisectional line of the wedge angle of tool.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.1
• /
• pp.79-90
• /
• 2020

Objective: In the present study, an liquid chromatography/mass spectrometry (LC/MS) metabolomics approach was performed to investigate potential biomarkers of milk production in high- and low-milk-yield dairy cows and to establish correlations among rumen fluid metabolites. Methods: Sixteen lactating dairy cows with similar parity and days in milk were divided into high-yield (HY) and low-yield (LY) groups based on milk yield. On day 21, rumen fluid metabolites were quantified applying LC/MS. Results: The principal component analysis and orthogonal correction partial least squares discriminant analysis showed significantly separated clusters of the ruminal metabolite profiles of HY and LY groups. Compared with HY group, a total of 24 ruminal metabolites were significantly greater in LY group, such as 3-hydroxyanthranilic acid, carboxylic acids, carboxylic acid derivatives (L-isoleucine, L-valine, L-tyrosine, etc.), diazines (uracil, thymine, cytosine), and palmitic acid, while the concentrations of 30 metabolites were dramatically decreased in LY group compared to HY group, included gentisic acid, caprylic acid, and myristic acid. The metabolite enrichment analysis indicated that protein digestion and absorption, ABC transporters and unsaturated fatty acid biosynthesis were significantly different between the two groups. Correlation analysis between the ruminal microbiome and metabolites revealed that certain typical metabolites were exceedingly associated with definite ruminal bacteria; Firmicutes, Actinobacteria, and Synergistetes phyla were highly correlated with most metabolites. Conclusion: These findings revealed that the ruminal metabolite profiles were significantly different between HY and LY groups, and these results may provide novel insights to evaluate biomarkers for a better feed digestion and may reveal the potential mechanism underlying the difference in milk yield in dairy cows.

• Korean Journal of Cognitive Science
• /
• v.10 no.3
• /
• pp.39-49
• /
• 1999

The space of IID([ndependently, Identically Distributed) textures was built with axes of mean luminance and contrast, and studied on what kind of mechanisms were required to mediate texture segregation in this space. The conjecture was tested that one of these mechanisms is sensitive to the differences between the means of textures to be discriminated, whereas the other is sensitive to the differences between variances. The probability of discrimination was measured for various pairs of textures in the lID space The data were well fit by a model in which discrimination depends on two mechanisms whose responses are combined by probability summation. The conjecture was rejected that two mechanisms respectively tuned to mean and variance of texture function in segregation. Discrimination within space is mediated by 2 independent channels however: the 2 independent channels are not exactly tuned to texture mean and variance. One m mechanism was primarily sensitive to texture mean, whereas the other was sensitive to b both texture mean and variance.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.9
• /
• pp.658-665
• /
• 2006

In these days, the demand of users to extend available period of mobile systems is increased according as the functions of mobile systems have been varied and the use of multimedia application has been increased. This paper proposes an integrated power management framework that considers executed workload types for effective energy management. The conventional methods use DVFS technique for CPU and DPM technique for WNIC separately or simply combine them based on the assumption that they are orthogonal one another. However, the proposed mechanism determines the kind of workload under analysis of the characteristics of workloads incoming through a WNIC. The proposed method can reduce energy consumption of system level effectively by controlling CPU and WNIC to proper power mode based on analyzed characteristics of workload. The experimental result shows the proposed method reduces energy consumption by 9% for BE (Best Effort) workload, CBR (Constant Bit Rate) workload, and Interactive workload on average and by 16% to maximum when compared with the conventional methods which simply combine DVFS technique for CPU and DPM technique for WNIC.

• KDI Journal of Economic Policy
• /
• v.35 no.2
• /
• pp.107-131
• /
• 2013

In this paper, we test and estimate the stochastic non-fundamental trend in Korean stock market. For this, following Kim (2011), we exploit that the long-run equilibrium stock price may be decomposed into fundamental and stochastic non-fundamental trends (i.e., the sum of dividend innovations and a part that are orthogonal with the dividend innovations) by using the Beveridge-Nelson decomposition and projections. In this VAR construction, there is an error correction mechanism through which stock prices converge to their long-run equilibrium, which also contain the stated stochastic non-fundamental trend as well as fundamental trend. The estimation and test results using yearly data from the Korea (1976-2012) indicated that fluctuations in stock prices during that period can be explained mainly not by the stochastic non-fundamental trend but by the dividend trend. However, during some periods like after Seoul Olympic Games, we may observe the non-fundamental trend affected to the stock price variation.