• The korean journal of orthodontics
• /
• v.50 no.4
• /
• pp.268-277
• /
• 2020

This case report demonstrates two different uprighting mechanics separately applied to mesially tipped mandibular first and second molars. The biomechanical considerations for application of these mechanisms are also discussed. For repositioning of the first molar, which was severely tipped and deeply impacted, a novel cantilever mechanics was used. The molar tube was bonded in the buccolingual direction to facilitate insertion of a cantilever from the buccal side. By twisting the distal end of the cantilever, sufficient uprighting moment was generated. The mesial end of the cantilever was hooked over the miniscrew placed between the canine and first premolar, which could prevent exertion of an intrusive force to the anterior portion of the dentition as a side effect. For repositioning of the second molar, an uprighting mechanics using a compression force with two step bends incorporated into a nickel-titanium archwire was employed. This generated an uprighting moment as well as a distal force acting on the tipped second molar to regain the lost space for the first molar and bring it into its normal position. This epoch-making uprighting mechanics could also minimize the extrusion of the molar, thereby preventing occlusal interference by increasing interocclusal clearance between the inferiorly placed two step bends and the antagonist tooth. Consequently, the two step bends could help prevent occlusal interference. After 2 years and 11 months of active treatment, a desirable Class I occlusion was successfully achieved without permanent tooth extraction.

• The korean journal of orthodontics
• /
• v.48 no.6
• /
• pp.405-411
• /
• 2018

Objective: This study was performed to investigate the rate of tooth movement and histological characteristics of extraction sockets those were subjected to corticotomy. Methods: A split-mouth randomized controlled trial experiment was designed. Thirty-two adult, male Wistar rats were divided into 2 groups: healing extraction socket (H) and recent extraction socket (R); these groups were randomly classified into 4 subgroups (0/7/21/60 days). The first maxillary molar was extracted on 1 side and 2 months were allowed for complete bone healing; then, the corresponding molar was extracted on the other side and surgical intervention was performed at the mid-alveolar point of the first maxillary molar. Ten grams of continuous force was applied. The outcomes measured were rate of tooth movement, percentage of periodontal space and histological evaluation. The rate of tooth movement was calculated as the measured distance divided by the duration of molar movement. Histomorphometric evaluations were performed on the second and third maxillary molars. The Wilcoxon signed rank test was used to compare differences between the two groups. Results: There were no significant differences in the rates of tooth movement between H and R groups at any of the 4 time points. The histological appearance and percentage of periodontal space between the R and H groups also demonstrated no significant differences. Conclusions: The rates of orthodontic tooth movement into recent and healed socket sites did not differ between the groups. Histological analysis of tooth movement revealed regional acceleration during every time period.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.537-544
• /
• 2010

Anchorage control in orthodontic treatment is an important factor affecting treatment results. In the conventional approach, intra-oral anchorage such as application of differential force and moment, Nance holding arch and lingual arch, as well as extra-oral anchorage such as head gear were used for anchorage reinforcement. However, these anchorages may result in undesired tooth movement and require patient cooperation. To overcome these disadvantages, skeletal anchorage system was introduced as orthodontic anchorage. Types of skeletal anchorage include implant, onplant, miniplate and miniscrew. Especially, miniscrew has many advantages such as reduced patient cooperation, low cost and easy placement. Recently, it is successfully used in orthodontic treatment. This cases were treated using orthodontic miniscrews for retraction of ectopically erupting maxillary canine and impacted mandibular canine and intrusion of maxillary incisors.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.2
• /
• pp.157-165
• /
• 2014

Skeletal anchorage is recommended as an orthodontic treatment for an impacted immature permanent tooth. Among these methods, C-tube is relatively safe because it is fixed to the cortical bone of interdental and the lower part of the root with several short miniscrews, which causes less damage to the root in patients of early permanent dentition. As it can be easily bent, the traction direction can be adjusted to favorable bone density sites. However, patient cooperation is important and traction based on physiological force in order to gain root and dentoalveolar tissue development in immature permanent teeth is required. Periodic follow-ups should be mandatory.

• The korean journal of orthodontics
• /
• v.31 no.4 s.87
• /
• pp.415-424
• /
• 2001

Anchorage in orthodontics is very important factor for orthodontist to treat malocclusion from diagnosis and treatment planning to end of treatment. Skeletal anchorage like miniscrew is supposed to be more effective method in anchorage control than conventional anchorage which needs patient's good cooperation. So this article will be mentioned about various clinical application of miniscrew through the general investigation and case reports about orthodontic use of miniscrew, specially about screwing area and clinical consideration of miniscrew's screwing on midpalate. The changes of treatment philosophy and methods by using skeletal anchorage were summarized and following results were obtained. 1. The orthodontic anchorage changed from relative concept to absolute one. 2. Bodily movement of teeth gets easier and determinate force system is possible on biomechanical consideration. 3. Some part of treatment that needs surgical intervention is possible by just orthodontic treatment.

• The korean journal of orthodontics
• /
• v.42 no.4
• /
• pp.207-217
• /
• 2012

Objective: This study aimed to evaluate the effect of an intentionally created socket on bone remodeling with orthodontic tooth movement in rabbits. Methods: Eighteen male rabbits weighing 3.8 - 4.25 kg were used. An 8-mm deep and 2-mm wide socket was drilled in the bone 1 mm mesial to the right mandibular first premolar. The left first premolar was extracted to serve as an extraction socket. A traction force of 100 cN was applied to the right first premolar and left second premolar. Sections were obtained at the middle third of the moving tooth for both the drilled and extraction sockets and evaluated with hematoxylin and eosin staining and immunohistochemical analyses. The amount of tooth movement and tartrate-resistant acid phosphatase (TRAP)-positive cell count were compared between the 2 groups using the Mann-Whitney U test. Results: At week 2, the distance of tooth movement was significantly higher in the intentional socket group (p < 0.05) than in the extraction socket group. The number of TRAP-positive cells decreased in week 2 but increased in week 3 (p < 0.05). However, there were no significant differences between the groups. Furthermore, results of transforming growth factor (TGF)-${\beta}$ staining revealed no significant differences. Conclusions: The intentional socket group showed greater distance of tooth movement than did the extraction socket group at week 2. Osteoclast counts and results of immunohistochemical analyses suggested elevated bone remodeling in both the groups. Thus, osteotomy may be an effective modality for enhancing tooth movement in orthodontic treatment.

• The korean journal of orthodontics
• /
• v.47 no.2
• /
• pp.130-141
• /
• 2017

The aim of this case report was to describe an innovative orthodontic treatment method that combined surgical and orthodontic techniques. The novel method was used to achieve a positive result in a case of moderate crowding by employing a computer-guided piezocision procedure followed by the use of clear aligners. A 23-year-old woman had a malocclusion with moderate crowding. Her periodontal indices, oral health-related quality of life (OHRQoL), and treatment time were evaluated. The treatment included interproximal corticotomy cuts extending through the entire thickness of the cortical layer, without a full-thickness flap reflection. This was achieved with a three-dimensionally printed surgical guide using computer-aided design and computer-aided manufacturing. Orthodontic force was applied to the teeth immediately after surgery by using clear appliances for better control of tooth movement. The total treatment time was 8 months. The periodontal indices improved after crowding correction, but the oral health impact profile showed a slight deterioration of OHRQoL during the 3 days following surgery. At the 2-year retention follow-up, the stability of treatment was excellent. The reduction in surgical time and patient discomfort, increased periodontal safety and patient acceptability, and accurate control of orthodontic movement without the risk of losing anchorage may encourage the use of this combined technique in appropriate cases.

• The korean journal of orthodontics
• /
• v.28 no.6 s.71
• /
• pp.991-999
• /
• 1998

Tooth impaction may lead to malocclusion, root resolution, cyst or aberrant changes in adjacent teeth. Clinical and radiographic examinations are used to locate the impaction, and appropriate treatment plans must be made to relocate the impacted tooth. When surgically exposing the impacted tooth, periodontal considerations to conserve maximum amount of soft and hard tissue are used. Oral hygiene instructions are emphasized to maintain sound periodontal health. Securing enough space for the impacted tooth and proper anchorage is important. Proper use of force and mechanics is crucial to prevent such complications as root resolution. Various patterns of orthodontic traction may be employed as situation permits. Most impaction cases can be managed with orthodontic traction to restore function and esthetics, provided that early detection and proper diagnosis and treatment planning are made.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.4
• /
• pp.147-155
• /
• 2008

The dental orthodontic wire provides a good combination of strength, corrosion resistance and moderate cost. The purpose of this study was to investigate the effects of TiN and ZrN coating on corrosion resistance and physical property of orthodontic wire using various instruments. Wires(round type and rectangular type) were used, respectively, for experiment. Ion plating was carried out for wire using Ti and Zr coating materials with nitrogen gas. Ion plated surface of each specimen was observed with field emission scanning electron microscopy(FE-SEM), energy dispersive X-ray spectroscopy(EDS), atomic force microscopy(AFM), vickers hardness tester, and electrochemical tester. The surface of TiN and ZrN coated wire was more smooth than that of other kinds of non-coated wire. TiN and ZrN coated surface showed higher hardness than that of non-coated surface. The corrosion potential of the TiN coated wire was comparatively high. The current density of TiN coated wire was smaller than that of non-coated wire in 0.9% NaCl solution. Pit nucleated at scratch of wire. The pitting corrosion resistance $|E_{pit}-E_{rep}|$ increased in the order of ZrN coated(300 mV), TiN coated(120 mV) and non-coated wire(0 mV).

• The korean journal of orthodontics
• /
• v.50 no.3
• /
• pp.188-196
• /
• 2020

Objective: Preservation of the periodontal ligament (PDL) is vital to the success of tooth autotransplantation (TAT). Increased PDL volumes and facilitated tooth extraction have been observed upon orthodontic preloading. However, it is unclear whether any changes occur in the expressions of bone biomolecules in the increased PDL volumes. This study aimed to determine the expressions of runt-related transcription factor 2 (RUNX2), alkaline phosphatase (ALP), receptor activator of nuclear factor kappa-B ligand (RANKL), and osteoprotegerin (OPG) in PDL upon preloading. Methods: Seventy-two premolars from 18 patients were randomly assigned to experimental groups that received a leveling force for 1, 2, or 4 weeks or to a control unloaded group. Following extraction, PDL volumes from 32 premolars of eight patients (21.0 ± 3.8 years) were evaluated using toluidine blue staining. The expressions of the biomolecules in the PDL from 40 premolars of ten patients (21.4 ± 4.0 years) were analyzed via immunoblotting. Results: The median percentage of stained PDL was significantly higher at 2 and 4 weeks after preloading than in the unloaded condition (p < 0.05). The median RUNX2 and ALP expression levels were significantly higher at 2 and 4 weeks after preloading than in the unloaded condition (p < 0.05), whereas the median RANKL/OPG ratios were significantly higher at 1 and 4 weeks after preloading (p < 0.05). Conclusions: Orthodontic preloading for 4 weeks enhances PDL volumes as well as the expressions of RUNX2, ALP and the RANKL/OPG ratio in the PDL, suggesting this loading period is suitable for successful TAT.