• Archives of Plastic Surgery
• /
• 제44권1호
• /
• pp.19-25
• /
• 2017

Background Numerous condylar repositioning methods have been reported. However, most of them are 2-dimensional or are complex procedures that require a longer operation time and a highly trained surgeon. This study aims to introduce a new technique using a condylar repositioning plate and a centric relation splint to achieve a centric relationship. Methods We evaluated 387 patients who had undergone surgery for skeletal jaw deformities. During the operation, a centric relation splint, intermediate splint, final centric occlusion splint, and condylar repositioning plate along with an L-type mini-plate for LeFort I osteotomy or a bicortical screw for bilateral sagittal split ramus osteotomy were utilized for rigid fixation. The evaluation included: a physical examination to detect preoperative and postoperative temporomandibular joint dysfunction, 3-dimensional computed tomography and oblique transcranial temporomandibular joint radiography to measure 3-dimensional condylar head movement, and posteroanterior and lateral cephalometric radiography to measure the preoperative and postoperative movement of the bony segment and relapse rate. Results A 0.3% relapse rate was observed in the coronal plane, and a 2.8% relapse rate in the sagittal plane, which is indistinguishable from the dental relapse rate in orthodontic treatment. The condylar repositioning plate could not fully prevent movement of the condylar head, but the relapse rate was minimal, implying that the movement of the condylar head was within tolerable limits. Conclusions Our condylar repositioning method using a centric relation splint and miniplate in orthognathic surgery was found to be simple and effective for patients suffering from skeletal jaw deformities.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권2호
• /
• pp.109-113
• /
• 2007

Introduction. In patients with mandibular prognathism, Bilateral Sagittal Split Ramus Osteotomy(BSSRO) combined with orthodontic treatment reduces oral volume and influences tongue and other surrounding tissues. Purpose of this study was to analyze post-operative tongue position and airway dimension, as well as mandibular changes in vertical, horizontal, and angular dimensions. Materials and methods. Height of dorsum of tongue, width of airway, gonial angle and lower facial height of mandibular prognathic patients who visited Kangdong Sacred Heart Hospital from Jan. 2001 to Dec. 2006 were anaylzed via pre-operative and post-operative cephalograms. T-test was used to compare pre-operative and post-operative measurements. Also, correlations among pre-operative measurements of the patients were analyzed. Results and conclusion. A significant correlation was shown between ANS-Xi-PM area and location of dorsum of tongue in pre-operative patients. A significant superior movement of tongue and decrease of airway width was observed in post-operative patients. Also the upper gonial angle decreased significantly.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제28권6호
• /
• pp.440-455
• /
• 2002

The final goal for an orthognathic surgery is a functional and esthetic achievement based on occlusion theory. All the dental treatment should be done with the occlusion in mind, though, they tend to be ignored with no good reason. We cannot think of occlusion without temporomandibular joint because it is the first clue to define an occlusion. As normal occlusion comes from the central tendency of distribution of population, we can get it by examining the population that closely meet the criteria of ideal occlusion. To perform proper occlusal function and to maintain the stability after treatment, the case must be finished in normal occlusion closer to ideal one. Our aim is to achieve the ideal occlusal scheme like the mutually protected occlusion with the best masticatory efficiency and the stability. The facial esthetics are influened by culture, race and the time in which human live. While the occlusal function rarely changes as time goes by, esthetics tend to do from one country to another. Orthodontists and maxillofacial surgeons should have solid sets of treatment goals to achieve the best facial esthetics and the ideal occlusion dictated by the joint. Doing orthognathic surgery, two factors aforementioned should be taken into account to establish the Surgical Treatment Objectives(STO). The doctors who are planning orthognathic surgery need to have a very logical and systematic thought process to make STO. The author examined 28 selected beautiful Korean female adults with normal skeleton with normal occlusion and analyzed the hard and the soft tissue relationship into five parts : dentomaxillary relationship, intermaxillary relationship, posture to hard tissue relationship, facial balance, and posture to soft tissue relationship. This study presents a sequential flow of diagnosis and treatment planning especially for surgical patients and it also can be applied to the nonsurgical patients.

• 대한소아치과학회지
• /
• 제33권2호
• /
• pp.311-316
• /
• 2006

중심교합위 상태에서 편측이나 양측으로 구치부의 상악치아가 하악치아의 협측으로 위치한 경우를 scissors bite라고 한다. 이런 부정교합은 상악의 폭이 크거나 하악의 폭이 좁은 경우 발생한다. 이로 인해 턱의 성장이 방해를 받고 악궁간 부조화를 유발하며 적절한 저작을 할 수 없게 된다. 따라서 scissors bite는 즉시 차단교정을 해야하며 일반적으로 scissors bite의 치료는 고정성 또는 가철성 장치를 이용하여 하악을 확장한다. 이에 저자는 scissors bite를 보이는 환아의 4세의 두 명의 남아에게 Schwarz장치를 이용하여 양호한 결과를 얻어 scissors bite의 치료법 제시에 도움이 되고자 보고하는 바이다.

• 대한치과교정학회지
• /
• 제43권1호
• /
• pp.42-52
• /
• 2013

The aim of this paper was to propose a new method of bimaxillary orthognathic surgery planning and model surgery based on the concept of 6 degrees of freedom (DOF). A 22-year-old man with Class III malocclusion was referred to our clinic with complaints of facial deformity and chewing difficulty. To correct a prognathic mandible, facial asymmetry, flat occlusal plane angle, labioversion of the maxillary central incisors, and concavity of the facial profile, bimaxillary orthognathic surgery was planned. After preoperative orthodontic treatment, surgical planning based on the concept of 6 DOF was performed on a surgical treatment objective drawing, and a Jeon's model surgery chart (JMSC) was prepared. Model surgery was performed with Jeon's orthognathic surgery simulator (JOSS) using the JMSC, and an interim wafer was fabricated. Le Fort I osteotomy, bilateral sagittal split ramus osteotomy, and malar augmentation were performed. The patient received lateral cephalometric and posteroanterior cephalometric analysis in postretention for 1 year. The follow-up results were determined to be satisfactory, and skeletal relapse did not occur after 1.5 years of surgery. When maxillary and mandibular models are considered as rigid bodies, and their state of motion is described in a quantitative manner based on 6 DOF, sharing of exact information on locational movement in 3-dimensional space is possible. The use of JMSC and JOSS will actualize accurate communication and performance of model surgery among clinicians based on objective measurements.

• Journal of Periodontal and Implant Science
• /
• 제37권4호
• /
• pp.681-690
• /
• 2007

Mini implants had been used provisionally for the healing period of implants in the beginning. But it becomes used for the on-going purpose, because it is simple to use, economic and especially suitable for the overdenture. But there is few studies about the stability of mini implants, that is most important factor for the on-going purpose, and particularly the implant parameters affecting the initial stability. The purpose of this study was to evaluate the stress and the strain distribution pattern of immediate-loaded screw type orthodontic mini-implant and the parameters affecting the initial stability of immediate-loaded mini-implant. Two dimensional finite element models were made and contact non-linear finite element analysis was performed. The magnitude and distribution of Von Mises stresses were evaluated. The obtained results were as follows: 1. The stress was concentrated on the thread tip of an implant in the cortical bone. 2. The direction of load is the most important factor for the stress distribution in cortical bone. 3. The diameter of an implant is the most important factor for the stress distribution in the trabecular bone. In conclusion, if the horizontal load vector is successfully controlled, mini-implants, which diameter is under 3mm, can be used for the on-going purpose.

• 구강회복응용과학지
• /
• 제35권4호
• /
• pp.253-259
• /
• 2019

본 증례 보고는 하악 전치에 발생한 치은 퇴축을 laterally closed tunnel technique을 이용하여 처치하였다. 환자는 모두 과거 교정 치료 시 하악 전치의 경사도를 변화시켰으며 치주 적으로 얇은 생체형을 가지고 있었다. 터널링법으로 수여 부를 형성하고 구개 측에서 채득한 결합조직이식편을 터널내에 위치시킨 후 판막의 변연을 치근 중앙부를 향해 측방으로 이동시켜 봉합하여 이식편을 피개 하였다. 얇은 치주 생체형에도 불구하고 치근 피개를 성공적으로 얻을 수 있었으며 각화 치은의 획득과 주변 조직과의 색, 형태 조화로 심미성을 달성할 수 있었다.

• Archives of Plastic Surgery
• /
• 제34권1호
• /
• pp.123-127
• /
• 2007

Purpose: Rigid external distraction(RED) is a highly effective technique for correction of maxillary hypoplasia in patients with cleft or syndromic craniosynostosis. Despite many advantages of RED, it also has the problem of relapse as the conventional advancement surgery. Bicoronal approach, that is the common approach to gain access to the craniofacial skeleton, had some morbidity, such as hair loss, sensory loss, wide scar and temporal hollowing. We present our clinical experience of RED distraction with minimal invasive approach and early rigid fixation to overcome these disadvantages. Methods: A 27-year-old female patient with Crouzon's disease underwent Le Fort III osteotomy and RED device application through the minimal invasive direct skin incisions. After the latent period of 5 days, distraction was undertaken until proper convexity and advancement were obtained. During the rigid retention period, inflammation occurred on the right cheek, and proper conservative managements were done including continuous irrigation. To maintain the stability of distraction, early rigid fixation was undertaken on the osteotomy sites through another skin incisions. Preoperative and postoperative orthodontic treatments were performed. Serial photographs and cephalometric radiographs were obtained preoperatively, after distraction and 6 months after distraction. Results: The cephalometric analysis demonstrated postoperatively significant advancement of the maxilla and improvement of facial convexity. After 6-month follow-up period, the maxilla was stable in the sagittal plane and no relapse was found. Facial scars were not noticeable and other deformity and morbidity did not occur. Conclusion: This effective and stable technique will be a good alternative for the patients who need large amount of distraction and for adult patients with severe maxillary hypoplasia or syndromic craniosynostosis.

• 대한치과교정학회지
• /
• 제49권6호
• /
• pp.404-412
• /
• 2019

Objective: To assess shear bond strength and failure mode (Adhesive Remnant Index, ARI) of orthodontic brackets bonded to polymethylmethacrylate (PMMA) blocks for computer-aided design/manufacture (CAD/CAM) fabrication of temporary restorations, following substrate chemical or mechanical treatment. Methods: Two types of PMMA blocks were tested: $CAD-Temp^{(R)}$ (VITA) and $Telio^{(R)}$ CAD (Ivoclar-Vivadent). The substrate was roughened with 320-grit sandpaper, simulating a fine-grit diamond bur. Two universal adhesives, Scotchbond Universal Adhesive (SU) and Assure Plus (AP), and a conventional adhesive, Transbond XT Primer (XTP; control), were used in combination with Transbond XT Paste to bond the brackets. Six experimental groups were formed: (1) $CAD-Temp^{(R)}/SU$; (2) $CAD-Temp^{(R)}/AP$; (3) $CAD-Temp^{(R)}/XTP$; (4) $Telio^{(R)}$ CAD/SU; (5) $Telio^{(R)}$ CAD/AP; (6) $Telio^{(R)}$ CAD/XTP. Shear bond strength and ARI were assessed. On 1 extra block for each PMMA-based material surfaces were roughened with 180-grit sandpaper, simulating a normal/medium-grit ($100{\mu}m$) diamond bur, and brackets were bonded. Shear bond strengths and ARI scores were compared with those of groups 3, 6. Results: On $CAD-Temp^{(R)}$ significantly higher bracket bond strengths than on $Telio^{(R)}$ CAD were recorded. With XTP significantly lower levels of adhesion were reached than using SU or AP. Roughening with a coarser bur resulted in a significant increase in adhesion. Conclusions: Bracket bonding to CAD/CAM PMMA can be promoted by grinding the substrate with a normal/medium-grit bur or by coating the intact surface with universal adhesives. With appropriate pretreatments, bracket adhesion to CAD/CAM PMMA temporary restorations can be enhanced to clinically satisfactory levels.

• 대한치과교정학회지
• /
• 제28권2호
• /
• pp.329-341
• /
• 1998

간염이나 AIDS의 영향으로 멸균에 대한 관심이 높아지고 있으며, 교정 진료실에서도 교정용 플라이어의 멸균이 필요하게 되었다. 제조회사에서는 멸균 과정의 열이 교정용 플라이어에서의 야금학적 변화를 야기하지 않는다고 하지만 교정치과의사들은 가압 증기 멸균기나 대류식 건열 멸균기를 이용하여 반복적으로 멸균을 시행한 경우에 ligature cutter의 날이 쉽게 무디어져서 ligature cutter의 수명이 짧아진다는 것을 임상적 경험으로 알고 있다. 본 연구는 멸균과정이 교정용 플라이어의 물성에 미치는 영향을 알아보기 위하여 시행되었다. 본 연구에 사용된 교정용 플라이어는 멸균 과정을 견딜 수 있도록 개발했다고 주장하는 AEZ, Unitek과 Dentronix ligature cutter이었고, 멸균기는 대류식 건열 멸균기인 Bowmar RHT-1000과 Dentronix DDS-5000와 가압 증기 멸균기 인 Eschmann SES-2000이었다. 멸균하기 전과 200회와 400회 멸균한 후의 ligature cutter의 날 부위의 표면과 파단면의 상태는 주사 저자 현미경으로, 미세 조직은 광학 현미경으로 관찰하고, micro-Vickers와 Rockwell 경도 시험기로 경도를 측정하고, SEM-EDX로 조성 분석을 시행하여 다음과 같은 결론을 얻었다. 1. 주사 전자 현미경을 이용한 교정용 플라이어의 날 부위의 표면과 파단면의 관찰에 의하면 멸균 횟수의 증가에 따라서 표면 조직에서 검은 반점 형태의 부식 생성물의 수와 크기가 증가하는 경향이 있었으며 파단면의 관찰에서도 멸균 횟수의 증가에 따라서 전형적인 취성 파면인 벽개면의 분포율이 증가하는 경향이 있었다. 이러한 부식 현상과 금속 조직의 취성화로 기계적 특성이 저하될 것으로 사료되었다. 2. 광학 현미경을 이용한 미세 조직 사진의 관찰에서도 멸균 횟수의 증가에 따라서 Cr계 탄화물의 수와 크기가 증가하는 경향이 있었다. 이러한 금속 조직의 조대화에 따라서 기계적 특성이 저하된 것으로 생각되었다. 3. 교정용 플라이어의 날 부위의 경도는 멸균 횟수의 증가에 따라서 감소되었는데 경도의 감소는 멸균에 의한 부식생성물과 표면 조직의 변화에 따른 것으로 생각되었다. 4. SEM-EDX를 이용한 조성 분석의 결과에 의하면 AEZ과 Unitek ligature cutter는 Fe-Cr계 stainless steel이었고, Dentronix ligature cutter는 Co-Cr계 합금이었는데, 제조 회사에 따라서 금속의 조성은 달랐지만 멸균 전후의 비교에서는 큰 차이가 없었다. 5. 반복적으로 멸균을 하면서 실제 임상에서 사용한 교정용 플라이어의 날의 표면 조직을 주사 전자 현미경으로 관찰한 결과, 미세 균열을 발견할 수 있었다.