• The korean journal of orthodontics
• /
• v.24 no.1 s.44
• /
• pp.149-159
• /
• 1994

The purposes of present study were to evaluate changes in models and lateral cephalometric head films during orthodontic treatment and to compare the amount of incisal retraction and anterior movement of molars with the two approaches of the retraction method of canine(sectional canine retractions vs sliding canine retractions) and the anchorage management(head gears vs no head gears, transpalatal arches vs no transpalatal arches and lingual arches vs no lingual arches) and to evaluate changes during orthodontic treatment in models with relation to lateral cephalometric head films. 67 Korean women with Angle's Class I bialveolar protrusion were selected, whose initial chronologic age was above 16 yrs. Models and lateral cephalometric head films were taken before and after orthodontic treatment with four bicuspid extraction. the results were obtained as follows. 1. Significant decreases were observed in intermolar width, arch length and arch perimeter of maxilla and mandible but significant difference was not observed in intercanine width of maxilla and mandible during treatment period. 2. The linear change of the upper incisor to upper lip was 2.84:1 and the linear change of the lower incisor to lower lip was 1.45:1 3. There were no significant differences between the two groups(sectional canine retractions vs sliding canine retractions), the !we groups(transpalatal arches vs no transpalatal arches) and the two groups(lingual arches vs no lingual arches) in the amount of incisal retraction and anterior movement of molars. There were a greater amount of maxillary incisal retraction and a lesser amount of anterior movement of maxillary molars with the use of head gears than no use of head gears. 4. Changes during orthodontic treatment in models with relation to lateral cephalometric head films were obtained as follows : 1) Maxilla Central incisors were moved 3.79mm backward, canines were moved 0.22mm laterally and 3.70mm backward, and molars were moved 0.535mm medially and 2.29mm forward. 2) Mandible Central incisors were moved 3.04mm backward, canines were moved 0.145mm laterally and 3.92mm backward, and molars were moved 0.755mm medially and 1.77mm forward.

• The korean journal of orthodontics
• /
• v.42 no.1
• /
• pp.4-10
• /
• 2012

Objective: To determine the effect of surface anodization on the interfacial strength between an orthodontic microimplant (MI) and the rabbit tibial bone, particularly in the initial phase aft er placement. Methods: A total of 36 MIs were driven into the tibias of 3 mature rabbits by using the self-drilling method and then removed aft er 6 weeks. Half the MIs were as-machined (n = 18; machined group), while the remaining had anodized surfaces (n = 18; anodized group). The peak insertion torque (PIT) and the peak removal torque (PRT) values were measured for the 2 groups of MIs. These values were then used to calculate the interfacial shear strength between the MI and cortical bone. Results: There were no statistical differences in terms of PIT between the 2 groups. However, mean PRT was significantly greater for the anodized implants ($3.79{\pm}1.39$ Ncm) than for the machined ones ($2.05{\pm}1.07$ Ncm) (p < 0.01). The interfacial strengths, converted from PRT, were calculated at 10.6 MPa and 5.74 MPa for the anodized and machined group implants, respectively. Conclusions: Anodization of orthodontic MIs may enhance their early-phase retention capability, thereby ensuring a more reliable source of absolute anchorage.

• The korean journal of orthodontics
• /
• v.42 no.3
• /
• pp.100-109
• /
• 2012

Objective: A national survey was conducted to assess orthodontic residents' current concepts and knowledge of cleft lip and palate (CLP) management in Korea. Methods: A questionnaire consisting of 7 categories and 36 question items was distributed to 16 senior chief residents of orthodontic department at 11 dental university hospitals and 5 medical university hospitals in Korea. All respondents completed the questionnaires and returned them. Results: All of the respondents reported that they belonged to an interdisciplinary team. Nineteen percent indicated that they use presurgical infant orthopedic (PSIO) appliances. The percentage of respondents who reported they were 'unsure' about the methods about for cleft repair operation method was relatively high. Eighty-six percent reported that the orthodontic treatment was started at the deciduous or mixed dentition. Various answers were given regarding the amount of maxillary expansion for alveolar bone graft and the estimates of spontaneous or forced eruption of the upper canine. Sixty-seven percent reported use of a rapid maxillary expansion appliance as an anchorage device for maxillary protraction with a facemask. There was consensus among respondents regarding daily wearing time, duration of treatment, and amount of orthopedic force. Various estimates were given for the relapse percentage after maxillary advancement distraction osteogenesis (MADO). Most respondents did not have sufficient experience with MADO. Conclusions: These findings suggest that education about the concepts and methods of PSIO and surgical repair, consensus regarding orthodontic management protocols, and additional MADO experience are needed in order to improve the quality of CLP management in Korean orthodontic residents.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.2
• /
• pp.185-189
• /
• 2011

Tooth impaction represents the stop of eruption by clinical and radiographical disturbance in eruption path or the dislocation of tooth germ. The most common factor in tooth eruption disorders are spacial deficiency with other causes reported to be odontogenic tumors, periodontal ligament injury, etc. Impaction of the mandibular second molar is relatively rare and reported in about 3 out of 1,000 people. Because the second molars tend to erupt in a mesial direction, this situation can lead to serious problems if untreated, including dental caries, periodontal disease and root resorption of the first molar. Treatment of this problem includes, surgical repositioning and orthodontic forced eruption. Because each procedure have the definite advantages and disadvantages, and influenced by circumferential environment, these have limits for successfu1 recovery as independent treatment. In a case at St. Mary's Hospital, we performed successful correction of a horizontal impacted mandibular second molar using a miniplate skeletal anchorage system. We introduce this treatment as a valid method for an impacted second molar and consider a oromaxillofacial surgeon's role in tooth movement treatment.

• The korean journal of orthodontics
• /
• v.50 no.2
• /
• pp.145-154
• /
• 2020

Moving the mandibular posterior teeth into a severely atrophic edentulous space is a challenge. A carefully designed force-and-moment system that results in bodily protraction of the posterior teeth with balanced bone resorption and apposition is needed in such cases. This report describes the treatment of a 19-year-old woman with missing mandibular first molars due to juvenile periodontitis. Miniscrews were used as absolute anchorage during protraction of the mandibular second and third molars. Bodily mesial movement of the mandibular second and third molars was achieved over a distance of 11 to 17 mm after 39 months of orthodontic treatment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.51 no.1
• /
• pp.88-98
• /
• 2024

Patients with pediatric cancer often undergo multiple therapies, such as chemotherapy, radiation therapy, and stem cell transplantation. These treatments, while essential, can result in dental developmental issues, including hypodontia, microdontia, short roots, and delayed dental development. This report presents two cases of pediatric patients diagnosed with neuroblastoma who exhibited severe tooth mobility due to short roots as a complication of cancer treatment. Moreover, we investigated the conservative management of the patients' conditions using resin wire splints and orthodontic miniscrews for skeletal anchorage along with long-term follow-ups to evaluate their prognosis.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.4
• /
• pp.365-371
• /
• 2005

In esthetic treatment of bimaxillary protrusion, it is important to move backward the anterior teeth segment. For the backward movement of the anterior teeth segment, orthodontic force and segmental osteotomy have been applied on the clinical treatment until recently. These methods caused long treatment time, anchorage loss, the possibility of root resorption and the complication followed by segmental osteotomy. Therefore, corticotomy has become a major concern lately. This research has been conducted to study the efficiency of corticotomy in the treatment of bimaxillary protrusion comparing the profile change, canine retraction velocity and space closing time. The research compared and analyzed space closing time, canine retraction velocity and profile change in two groups of patients. Both groups were formed out of patients over 18 years old who visited the department of dentistry in Hanyang University for treatments. The experimental group who was treated by corticotomy and Skeletal Anchorage System(SAS). The control group who received orthodontic treatment using SAS. The following results are produced after analyzing both groups. The significant statistic difference in space closing time has been observed in the experimental group as compared with the control group(p<0.05). In the experimental group, the significant statistic increase in canine retraction velocity was also observed(p<0.05). There was no significant difference in profile change between the control group and the experimental group(p<0.05). As a result, orthodontic treatment using corticotomy has a reasonable efficiency in space closing time as compared with the existing orthodontic treatment. Therefore, it is concluded that corticotomy with orthodontic treatment can be reasonably applied to dentofacial abnormality.

• The korean journal of orthodontics
• /
• v.28 no.3 s.68
• /
• pp.453-459
• /
• 1998

The dental implants for edentulous Patients have been used for more than 20 years. After the introduction of osseointegration by $Br{\aa}nemark$, the commercially pure titanium implants were accepted by most practitioners. Recently dental implants are used for orthodontic anchorages as well as prosthetic abutment. Many researchers have reported implants as a good orthodontic anchorage through basic research and clinical evaluation. But previous researches were done after the healing time for osseointegration of inserted implants. If dental implants are to be used for prosthetic abutment the healing time for osseointegration is necessary, but orthodontic forces to implants are different from bite force regarding its amount of force, duration and direction. The authors evaluated the effect of orthopedic force to implants on bone tissue before osseointegration. 48 implants were placed at 12 rabbits. 2 implants into left side and 2 implants into right side were inserted along the long axis of femur respectively 2 weeks (2 weeks group), 4 weeks (4 weeks group) and 6 weeks (6 weeks group) after implants placement, 300g force had been applied to the implants at left side femur by Ni-Ti close coil spring for 4 weeks (experimental group) and no force applied to implants at right side femur (control group). After the force application for 4weeks, rabbits were sacrificed and microscopic evaluation was done by hematoxylin-eosin stain and Masson trichrome stain. The result3 were followed. 1. All implants in experimental group remained rigid after the force application for 4 weeks. 2. More fibrous tissue between bone and implants were noticed at 2 weeks experimental group than 2 weeks control group 3. More bone remodeling was noticed at 4weeks group than 2 weeks group and it was difficult to find out fibrous tissue between bone and implants at both experimental and control group of 4 weeks group. 4. It was hard to distinguish experimental group from control group at 6 weeks group. Therefore if initial stability can be obtained on implant insertion, it can be possible to use implants as a orthodontic anchorage before the healing time for osseointegration.

• The korean journal of orthodontics
• /
• v.31 no.5 s.88
• /
• pp.517-523
• /
• 2001

Titanium miniscrews we being used increasingly as an anchorage for tooth movement, because they ate easy to place and to remove, increase the number of sites available, give minimum strain to patients regarding surgical procedures, and offer uneventful healing alter removal. The use of titanium miniscrews as an orthodontic anchorage has been reported in clinical case reports, but clinicians have experienced screw loosening when using such screws.' To our knowledge, there are no published reports evaluating the stability of miniscrews. Information about the length of miniscrews used in relation to the location is of some importance, as stability will vary depending on bone duality The purpose of this study was to evaluate a variety of Lengths of miniscrews (dimeter: 2mm) which were inserted in maxilla or mandible and to demonstrate in a dog model which miniscrew provides fundamental stability in the jaws. 10 mm long miniscrews in the maxilla and 8mm long: miniscrews in the mandible showed no clinical mobility and retained their position throughout an 8 weeks force (200g) application. The mucosal condition around the screws was healthy in cases in which miniserews were inserted in the alveolar bone between the roots and the head of the screws emerged into the attached gingiva. When the force application was terminated, radiographic analysis revealed neither rent resorption not periodontal pathology around the miniscrews that remained stable during the entire treatment period. This study suggests that if titanium miniscrews with adequate length are properly used depending on the location, they provide sufficient stability for orthodontic anchorage.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.4
• /
• pp.265-277
• /
• 2014

Purpose: The purpose of this study was to investigate the differences of displacement pattern depending on type of sliding jig and application method during maxillary molar distalization with temporary anchorage devices (TADs). Materials and Methods: Maxilla with normal tooth size and arch shape was selected to create a 3-dimensional finite element model, which included the bracket, orthodontic main archwire, removable sliding jig (R-jig). The orthodontic mini-implant anchorage was set 8 mm superiorly from main archwire, buccally between the second premolar and first molar. The base experimental design was Condition 1, which was composed $0.019{\times}0.025$ inch stainless steel (SS) of wire size of R-jig, 200 gm force, un-tied state. And the other designs varied to wire size of R-jig, magnitude of force. The results are as follows. Results: As the wire size of R-jig was increased, the deformation of R-jig was decreased. However, the displacement of second molar wasn't different each other. As the force to second molar was increased, the more displacement of second molar was observed, and the more distal tipping movement, vetical displacement was observed. Conclusion: R-jig can get distal teeth movement in orthodontic treatment without side effects.