• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.4
• /
• pp.366-372
• /
• 2012

The aim of this study was to compare two commercial root canal medicaments, ProRoot MTA (Dentsply Tulsa, USA) and OrthoMTA (Bio MTA, Korea), by assessing the antimicrobial effects on three selected species commonly found in root canals of infected teeth, namely Enterococcus faecalis, Fusobacterium nucleatum and Staphylococcus epidermidis. Colonies of these bacteria were treated with varied concentrations of ProRoot MTA or OrthoMTA over different lengths of time. The results are as follows : 50, 25 and 12.5 mg/mL of ProRoot MTA or OrthoMTA did not completely inhibit the growth of E. faecalis, but a decreased growth rate was evident in comparison to the control (p < 0.05). 50 mg/mL of both materials successfully eliminated F. nucleatum during the first 24 hours. Regrowth of microbes after 24 hours, however, indicated a diminished effect of ProRoot MTA whereas OrthoMTA showed its continuously sustained antimicrobial actions (p < 0.05). 50 mg/mL of ProRoot MTA and 50, 25 mg/mL of OrthoMTA exerted their full antibacterial actions against S. epidermidis during the first 24 hours. Although the regrowth of colony was observed after 24 hours, the rate of growth was significantly decreased, approximating a complete inhibition (p < 0.05). The present study revealed that OrthoMTA, recently developed in Korea, had antimicrobial activity higher than ProRoot MTA.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.3
• /
• pp.229-236
• /
• 2011

ProRoot MTA(Dentsply Tulsa, U.S.A) which has similar component with Portland cement has setting expansion character and long setting time. Excessive expansion can cause fracture at the apical portion of the root and decreasing of volume stability. And the long setting time makes additional visits for crown restoration and slow setting process of this material can change physical properties itself. In this study, among requirements of root canal filling material(KS P ISO 6876) which is revised at 2008, we investigated the setting time and setting expansion. Objects are recently developed OrthoMTA(BioMTA, Korea), conventional ProRoot white MTA(Dentsply Tulsa, U.S.A) and White portland cement(Union, Korea). The results in setting expansion, OrthoMTA was $0.08{\pm}0.02%$, ProRoot white MTA and White portland cement were each $0.28{\pm}0.06$, $0.80{\pm}0.25%$(p<0.05). The results in setting time, OrthoMTA, ProRoot white MTA, White portland cement were each $307.78{\pm}3.83$ min, $150.44{\pm}2.35$ min, $235.33{\pm}9.07$ min(p<0.05).

• Restorative Dentistry and Endodontics
• /
• v.41 no.1
• /
• pp.12-21
• /
• 2016

Objectives: To evaluate the effects of three acids on the microhardness of set mineral trioxide aggregate (MTA) and root dentin, and cytotoxicity on murine macrophage. Materials and Methods: OrthoMTA (BioMTA) was mixed and packed into the human root dentin blocks of 1.5 mm diameter and 5 mm height. Four groups, each of ten roots, were exposed to 10% citric acid (CA), 5% glycolic acid (GA), 17% ethylenediaminetetraacetic acid (EDTA), and saline for five minutes after setting of the OrthoMTA. Vickers surface microhardness of set MTA and dentin was measured before and after exposure to solutions, and compared between groups using one-way ANOVA with Tukey test. The microhardness value of each group was analyzed using student t test. Acid-treated OrthoMTA and dentin was examined by scanning electron microscope (SEM). Cell viability of tested solutions was assessed using WST-8 assay and murine macrophage. Results: Three test solutions reduced microhardness of dentin. 17% EDTA demonstrated severe dentinal erosion, significantly reduced the dentinal microhardness compared to 10% CA (p = 0.034) or 5% GA (p = 0.006). 10% CA or 5% GA significantly reduced the surface microhardness of set MTA compared to 17% EDTA and saline (p < 0.001). Acid-treated OrthoMTA demonstrated microporous structure with destruction of globular crystal. EDTA exhibited significantly more cellular toxicity than the other acidic solutions at diluted concentrations (0.2, 0.5, 1.0%). Conclusions: Tested acidic solutions reduced microhardness of root dentin. Five minute's application of 10% CA and 5% GA significantly reduced the microhardness of set OrthoMTA with lower cellular cytotoxicity compared to 17% EDTA.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.1
• /
• pp.69-74
• /
• 2014

An OrthoMTA compacter is made by machining a Ni-Ti alloy wire using tapered helix creep-feed grinding machines. This aim of this study is to find the optimal dressing conditions to sharpen the corner of a cubic boron nitride (CBN) wheel. On the basis of the results of various experiments, it is verified that the most important factors in dressing are the dressing depth and feeding method, whereas the feed rate has less importance for producing a smaller corner R value. The study also finds the optimum dressing depth to reduce the dressing time, a feeding speed and method to stabilize the machining, and the mesh grade for the CBN wheel to make the groove of the compacter deeper.

• Journal of dental hygiene science
• /
• v.16 no.4
• /
• pp.317-322
• /
• 2016

Mineral trioxide aggregate (MTA) is widely used in endodontic therapy as a pulp-capping material, root or furcal perforation repair material, and for apexification and obturation of the root canal system. The purpose of this study was to formally document cases of MTA application in South Korean children and adolescents. Through this research, the practice of using MTA will be introduced and familiarized to the clinical practitioners. This study involved endodontic treatment using MTA for fractured crowns in 11- and 12-year-old. The children were followed up for 12 months until the pulp vitality was confirmed; in young permanent teeth with immature roots, the pulp is integral to the process of apexogenesis. These observational results regarding the use of MTA as an apexification material in non-vital immature permanent incisors appear to provide promising results in the search for new materials to meet existing endodontic needs.

• The Journal of the Korea Contents Association
• /
• v.20 no.6
• /
• pp.425-432
• /
• 2020

For this study copper ions-containing bioactive glass nanoparticles commonly used in mineral trioxide aggregate (MTA) was developed to improve the mechanical properties and promote antibacterial effect of MTA with the original material. The mechanical properties and antibacterial activity of Cu-BGn incorporating varying amounts cooper incorporated bioactive glass nano particles(BGn) 0.5,1.0,2.0 and 4.0 wt% in MTA were characterized composition of the resulting were investigated. The compressive strength was calculated by weighing specimens with a diameter of 4 mm and a thickness of 6 mm according to ISO 6876 (2012). The antimicrobial effect was evaluated using two strains of S. mutans and E. faecalis. The mechanical properties of the test results was Cu-BGn increased no statistically significant difference was observed (p>0.05). Adhesion experiment results S. mutans in contrast to the control group Ortho MTA, 4.0 wt% of Cu-BGn added experimental group showed a significant difference was observed (p<0.05). Also, E. faecalis statistical analysis indicated a significant difference for antibacterial agents between control and Cu-BGn containing(p<0.05). It seems that this Cu-BGn proved that even a antibacterial effect was demonstrated. Therefore, it was suggest that it is necessary for in-depth research into various environments that can reproduce the oral environment.

• Journal of Korean Dental Science
• /
• v.6 no.2
• /
• pp.41-49
• /
• 2013

Purpose: This study sought to compare the elemental constitution, morphological characteristics, particle size distribution, biocompatibility, and mineralization potential of Ortho MTA (OMTA) and ProRoot MTA (PMTA). Materials and Methods: OMTA and PMTA were compared using energy-dispersive spectrometry, particle size analysis, and scanning electron microscopy. The biocompatibility and mineralization-related gene expression (osteonectin and osteopontin) of both MTAs were also compared using methylthiazol tetrazolium assay and reverse transcription-polymerization chain reaction analysis, respectively. The results were analyzed by Kruskal-Wallis test with Bonferroni correction. P-value of <0.05 was considered significant. Result: The morphology of OMTA powders was similar to that of PMTA. The constituent elements of both MTAs were calcium, silicon, and aluminum. The mean particle sizes of OMTA and PMTA were 4.60 and 3.34 mm, respectively. Both MTAs had equally favorable in vitro biocompatibility and affected the messenger RNA expression of osteonectin and osteopontin. Conclusion: Within the limitations of this study, OMTA could be a promising biomaterial in clinical endodontics.

• Journal of dental hygiene science
• /
• v.22 no.3
• /
• pp.191-198
• /
• 2022

Background: The purpose of this study was to evaluate the composition of the crystal phases of various calcium silicate-based materials (CSMs): ProRoot white MTA^Ⓡ (mineral trioxide aggregate) (WMTA), Ortho MTA^Ⓡ (OM), Endocem MTA^Ⓡ (EM), Retro MTA^Ⓡ (RM), Endocem Zr^Ⓡ (EN-Z), Biodentine^TM (BD), EZ-seal^TM (EZ), and OrthoMTA III (OM3). Methods: In a sample holder, 5 g of the powder sample was placed and the top surface of the material was packed flat using a sterilized glass slide. The prepared slides were mounted on an X-ray diffraction (XRD) instrument (D8 Advance; Bruker AXS GmbH, Germany). The X-ray beam 2θ angle range was set at 10~90° and scanned at 1.2° per minute. The Cu X-ray source set to operate at 40 kV and 40 mA in the continuous mode. The peaks in the diffraction pattern of each sample were analyzed using the software Diffrac (version 2.1). Then, the peaks were compared and matched with those of standard materials in the corresponding Powder Diffraction File (PDF-2, JCPDS International Center for Diffraction Data). A powder samples of the materials were analyzed using XRD and the peaks in diffraction pattern were compared to the Powder Diffraction File data. Results: Eight CSMs showed a similar diffraction pattern because their main component was calcium silicate. Eight CSMs showed similar diffraction peaks because calcium silicate was their main component. Two components were observed to have been added as radiopacifiers: bismuth oxide was detected in WMTA, OM, and EM while zirconium oxide was detected in RM, EN-Z, BD, EZ, and OM3. Unusual patterns were detected for the new material, OM3, which had strong peaks at low angles. Conclusion: It was caused by the presence of Brushite, which is believed to have resulted in crystal growth in a particular direction for a specific purpose.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.7 no.2
• /
• pp.99-102
• /
• 2011

A-12year-old boy visited the clinic with chief complaint of anterior maxillary trauma. He was diagnosed with first degree mental retardation and cerebral disorders. By clinical and radiographic examination, intrusion of maxillary central incisors were found. The intrusion was not severe, teeth were luxated with a slight force and the prognosis was followed. After the first year, external root resorption was seen radiographically. Due to difficult behavior management, one visit root canal filling with OrthoMTA(BioMTA, Korea) which is known to generate of cementum and periodontal ligament was planned along with general anesthesia. OrthoMTA was filled from the apex to 1-2mm below cervical area and composite resin used for crown restoration. 6 months after, further resorption, discoloration and mobility was not found. This case is currently checked yearly and further research is needed for inflammatory root resorption and ankylosis.