• Journal of the Korean Solar Energy Society
• /
• v.29 no.2
• /
• pp.39-46
• /
• 2009

Heliostat, as a mirror system tracking the sun's movement, is the most important subsystem determining the efficiency of solar thermal power plant. Thus the accurate sun tracking performance under the various hazardous operating condition, is required. This study presents a methodology of development of the solar ray tracing technique and the application of it in the analysis of sun tracking error due to the heliostat geometrical errors. The geometrical errors considered here are the azimuth axis tilting error and the elevation axis tilting error. We first analyze the geometry of solar ray reflected from the heliostat. Then the point on the receiver, where the solar ray reflected from the heliostat is landed, is computed and compared with the original intended point, which represents the sun tracking error. The result obtained shows that the effect of geometrical error on the sun tracking performance is varying with time(season) and the heliostat location. It also shows that the heliostat located near the solar tower has larger sun tracking error than that of the heliostat located farther.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.3
• /
• pp.281-287
• /
• 2012

The internal oxide scale of twelve superheater and reheater tubes were tested which were serviced for 30,000~120,000 hours in thermal power plants. The oxide scale was formed in three layers. The Cr-rich area was observed beneath the original metal surface. The hematite ($Fe_2O_3$) phase was formed on the outer surface. The intermediate layer was magnetite ($Fe_3O_4$). The thickness of Cr-rich layer was about half of the total scale. All layers grew during the operation hour of the plant. The thickness of thickest scale was 0.2mm in superheater tubes. This can increase the tube metal temperature about $7^{\circ}C$ more than initial state. $7^{\circ}C$ tube metal temperature can reduce tube life about 30%, but the boiler tube's design margin is big enough therefore it has been analyzed that it would not effect on the life span.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1985.08b
• /
• pp.59-71
• /
• 1985

In rice, limited efforts have been made to identify genes by the use of insertional mutagens, especially heterologous transposons such as the maize Ac/Ds. We constructed Ac and gene trap Ds vectors and introduced them into the rice genome by Agrobacterium-mediated transformation. In this report, rice plants that contained single and simple insertions of T-DNA were analyzed in order to evaluate the gene-tagging efficiency. The 3'end of Ds was examined for putative splicing donor sites. As observed in maize, three splice donor sites were identified at the 3'end of the Ds in rice. Nearly 80% of Ds elements wered excised from the original T-DNA sites, when Ac cDNA was expressed under a CaMV 35S promoter. Repetitive ratoon culturing was performed to induce new transpositions of Ds in new plants derived from cuttings. About 30% of the plants carried at least one Ds that underwent secondary transposition in the later cultures. 8% of transposed Ds elements expressed GUS in various tissues of rice panicles. With cloned DNA adjacent to Ds, the genomic complexities of the insertion sites were examined by Southern hybridization. Half of the Ds insertion sites showed simple hybriodization patterns which could be easily utilized to locate the Ds. Our data demonstrate that the Ac/Ds mediated gene trap system could prove an excellent tool for the analysis of functions of genes in rice. We discuss genetic strategies that could be employed in a largee scale mutagenesis using a heterologous Ac/Ds family in rice.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.9
• /
• pp.758-767
• /
• 2000

The properties of linear time-varying(LTV) systems vary because of the time-varying property of plant parameters. The generalized controller design method for linear time-varying systems does not exit because the analytic soultion of dynamic equation has not been found yet. Hence, to design a controller for LTV systems, the robust control methods for uncertain LTI systems which are the approximation of LTV systems have been generally ised omstead. However, these methods are not sufficient to reflect the fast dynamics of the original time-varying systems such as missiles and supersonic aircraft. In general, both the performance and the robustness of the control system which is designed with these are not satisfactory. In addition, since a better model will give the more robustness to the controlled system, a gain scheduling technique based on LTI controller design methods has been uesd to solve time problem. Therefore, we propose a new gain scheduled QFT method for LTV systems based on neural networks in this paper. The gain scheduled QFT involves gain dcheduling procedured which are the first trial for QFT and are well suited consideration of the properties of the existing QFT method. The proposed method is illustrated by a numerical example.

• Nuclear Engineering and Technology
• /
• v.36 no.1
• /
• pp.36-46
• /
• 2004

The ISAAC fission product release calculation is based on detailed FPRAT models developed by Jaycor. For volatile fission product release calculations, either the Cubicciotti steam oxidation correlation or the NUREG-0772 correlation is used. In this study, evaluation is carried out for these volatile fission product release models. As a result, in the case of early release, the IDCOR model with an in-vessel Te release option shows the most conservative results and for the late release case, the NUREG-0772 model shows the most conservative results. Considering both early and late release, the IDCOR model with an in-vessel Te bound option is evaluated to show mitigated conservative results. In addition, a sensitivity study on detailed core nodalization is performed. In the study, 380 horizontal fuel channels in the Wolsong plant are nodalized into 12 (6 channels per loop, $3{\times}3$ Core Pass) representative channels and detailed by 16/20/24 channels. For reference accidents, LOAH and large LOCA are selected as representing high and low pressure sequences, respectively. According to the results, the original 12 channel approach with $3{\times}3$ core passes is evaluated to be sufficient as an optimal scheme.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.306-309
• /
• 1993

Digital redesign techniques are to derive a digital controller fred the existing continuous controller and its plant so that the performance of the digitally controlled system is matched as closely as possible to that of the original continuous system at the sampling instants. Recently a new digital redesign technique, was developed to use the generalized sampled-data hold function(GSHF) based on the the grammian matrix. With this new technique the digitally redesigned system showed several good features compared with any existing technique in terms of the state match at the sampling instants, the large sampling period, and the transient reponses. This paper concerns a further improvement of the new digital redesign technique by employing the discrete grammian matrix instead of the continuous grammian matrix in defining GSHF. With this modification, it was observed by simulation that the transient response of the modified digital system shows far better performance than the digital system based on the continuous grammian matrix.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.1
• /
• pp.23-26
• /
• 2005

This paper describes the algorithm for deciding the status of the operating machines in the power plants. It is very important to decide whether the status of the operating machines is good or not in the industry to protect the accidents of machines and improve the operation efficiency of the plants. There are two steps to analyze the status of the running machines. First, we extract the features from the input original data. Second, we classify those features into normal/abnormal condition of the machines using the wavelet transform and the input RMS vector through the K-means algorithm. In this paper we developed the algorithm to detect the fault operation using the K-means method from the sound of the operating machines.

• Food Science of Animal Resources
• /
• v.44 no.2
• /
• pp.255-268
• /
• 2024

Probiotic products have long been recognized for their health benefits. Additionally, milk has held a longstanding reputation as a dairy product that offers high-quality proteins and essential micronutrients. As awareness of the impact of food on health grows, interest in functional products such as probiotic dairy products is on the rise. Fermentation, a time-honored technique used to enhance nutritional value and food preservation, has been used for centuries to increase nutritional value and is one of the oldest food processing methods. Historically, fermented dairy products have been used as convenient vehicle for the consumption of probiotics. However, addressing the potential drawbacks of fermentation has recently led to increase in research on probiotic dairy drinks prepared without fermentation. These non-fermented dairy drinks have the advantage of maintaining the original flavors of milk drinks, containing potential health functional probiotics, and being an alternative dairy product that is helpful for probiotics intake. Currently, research on plant-based dairy products is rapidly increasing in the market. These developments might suggest the potential for novel forms of non-fermented dairy beverages with substantial prospects in the food market. This review aims to provide an overview of milk-based dairy beverages, both fermented and non-fermented, and discuss the potential of non-fermented dairy products. This exploration paves the way for innovative approaches to deliver probiotics and nutrition to consumers.

• The Korean Journal of Ecology
• /
• v.28 no.5
• /
• pp.305-320
• /
• 2005

Recently 64 species in Korea have been ranked as rare and endangered taxa by the Ministry of Environment using two categories, I and II. The original threat categories produced by the Ministry of Environment were developed to provide a standard for specifying animals and plants in danger of extinction and has been influential sources of information used in species conservation in Korea. However, the criteria by Ministry of Environment were applied to the whole taxa only by regional boundaries, especially in South Korea, rather than international context, and it also lacked an explicit framework that was necessary to ensure repeatability among taxa because of the absence of quantitative criteria to measure the likelihood of extinction. The World Conservation Union (IUCN) has developed quantitative criteria for assessing the conservation status of species. The threatened species categories, the 2000 IUCN Red List, proposed by SSC (Species Survival Commission) of IUCN have become widely recognized internationally. Details of threatened Korean plants, identified by applying the IUCN threat categories and definitions, were listed and analyzed. The number of species identified as threatened was only 34 out of 64 taxa (48.4%), while the rest of taxa were rejected from the original lists. Many of the species (51.6%, 33 taxa) excluded from the original list proposed by Ministry of Environment do not qualify as Critically Endangered, Endangered or Vulnerable because these taxa were widely distributed either in Japan or in China/far eastern Russia and there is no evidence of substantial decline in these countries. An evaluation of taxa in Korea has been carried out only based on subjective views and qualitative data, rather than quantitative scientific data, such as rates of decline, distribution range size, population size, and risk of extinction. Therefore, the national lists undermine the credibility of threatened species lists and invite misuse, which have been raised by other cases, qualitative estimate of risk, political influence, uneven taxonomic or geographical coverage. The increasing emphasis on international responsibilities means that global scale is becoming more significant. The current listings by Environment of Ministry of Korea should be challenged, and the government should seek to facilitate the resolution of disagreements. Especially the list should be flexible enough to handle uncertainty and also incorporates detailed, quantitative data. It is suggested that the highest priorities for the Red List should be given to endemic species in Korea first. After setting up the list of endemic species to Korea, quantitative data on population size and structure, distributional range, rated of decline, and habitat fragmentation should be collected as one of long term projects for the Red list categories. Transparency and accountability are the most important key factors. Also, species assessors are named and data sources referenced are required for the future objective evaluations on Korean plant taxa.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.3
• /
• pp.61-74
• /
• 2013

This study examined and analyzed ancient writing and poetry regarding cases of appreciating plants by using pots in a garden of a palace or private houses by ancestors, and examined shape and planting method of plant species and potted plants, arrangement and preference of potted plants. As for the method of the study, description research method which examines and interprets poem and painting based on potted plants. The results of this study is summarized like the following. First, the plants which were favorably used for potted plants include 19 kinds such as Prunus mume, Pinus densiflora, Pinus pumila, Phyllostachys spp., Camellia japonica, Punica granatum, and Gardenia jasminoidesa, and as for herbs, 12 kinds such as Chrysanthemum monifolium and Nelumbo nusifera . Second, the species which were specially arranged into artificial shapes include Prunus mume and Pinus densiflora. The two plants made the shape of severe curves of stems such as Wangpi. Gyuban, and Bangan, and there are Pinus densiflora dwarfed potted plant whose roots are stretched on Prunus mume grafted into a strange stump and an oddly shaped stone. For the beauty of the dwarfed tree shape, pine cones are added to an old Pinus densiflora or Parthenocissus tricuspidata is planted to stems, and additional method of making moss on the soil, which is called 'Jongbunchuigyeong'. As for planting method, water culture, planting on a stone, planting on a charcoal, and assembled planting are expressed in poetry. Third, as for external space for potted plants, a place where a king stays, a bed room for a king, surrounding areas and gardens of private houses, and step stones were used as a space which adds artistic effects. Potted plants are placed on a table in a library, on a desk, on a drawer, and near a pillow as a small items in a room, and scholars enjoyed original characteristics and symbolism of the potted plants. Fourth, at the time of flowering of Prunus mume, poetry event was held to enjoy the tree and writing poetry begun. And at the time of flowering of Chrysanthemum monifolium, the flowers were floated in a liquor glass or shadow play was enjoyed. Fifth, potted plants played the role of garden ornaments in elegant events of a palace, the gentry, wedding ceremony, and sacrificial rites. Sixth, potted plants were used as tributes between countries, donation to a king, or a gift of a king. In addition, there were many cases where scholars exchanged potted plants and there is the first record of giving a potted plant in 'Mokeunsigo' by Mokeun Isaek, scholar in the late era of Goryeo. Seventh, at the time of flowering Prunus mume, Chrysanthemum monifolium, Gardenia jasminoides, Nelumbo nusifera, and Narcissustazetta var. chinensis, they enjoyed the particular fragrance and express it into poetry. Eighth, plant species from southern parts such as Camellia japonica, Daphne odora, Gardenia jasminoides, Citrus unshiu, Phyllostachys spp., Punica granatum, Rosa rugosa, and Musa basjoo, or foreign plant species, and species weak against the cold were utilized as pot plants for enjoying green trees indoors in northern central province in harshly cold winter.