• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.55-58
• /
• 2007

This study describes a problem of the Original Bench Mark which is used currently. We calculate New Mean Sea Level(MSL) in Incheon Port using tide data for 57 months and take 8 points GPS/Leveling data in research area. We calculate orthometric height of one control point using tide data and GPS/Leveling data. After fixed the control point, we decide final orthometric heights using relative geoidal height and ellipsoidal height from GPS survey. To analysis the Original Bench Mark compares final orthometric heights with the orthometric heights in Korea height system. We get the result that the New Original Bench Mark's height is 26.7176m. It appears 3.05cm difference as the Original Bench Mark's height is 26.6871cm in Korea height system.

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.19-24
• /
• 2015

PURPOSES : The objective of this study is to evaluate the effect of the residual mortar of recycled concrete aggregate on the expansion behavior during alkali silica reaction (ASR). METHODS: In order to evaluate the net effect of residual mortar on ASR expansion behavior, two aggregate samples with the same original virgin aggregate source but different residual mortar volumes were used. ASTM C1260 test was used to evaluate the ASR expansion behavior of these two aggregates and the original virgin aggregate. RESULTS: The greater the amount of residual mortar in recycled concrete aggregates, the less is the induced ASR expansion. Depending on the amount of residual mortar in recycled concrete aggregate, the ASR expansion of recycled concrete aggregate may be less than half of that of the original virgin aggregate. CONCLUSIONS: The residual mortar of recycled concrete aggregate may lead to the under estimation of the ASR expansion behavior of the original virgin aggregate.

• 대한기계학회논문집B
• /
• 제21권3호
• /
• pp.341-349
• /
• 1997

The characteristics of defect correction method are discussed in a sample heat conduction problem showing the numerical solution of the error correction equation can predict the error of the numerical solution of the original governing equation. A way of using defect correction method combined with the existing algorithm for the incompressible fluid flow, is proposed and subsequently tested for the driven square cavity problem. The error correction equations for the continuity equation and the momentum equations are considered to estimate the errors of the numerical solutions of the original governing equations. With this new approach, better velocity and pressure fields can be obtained by correcting the original numerical solutions using the estimated errors. These calculated errors also can be used to estimate the orders of magnitude of the errors of the original numerical solutions.

• 한국전산유체공학회지
• /
• 제4권3호
• /
• pp.44-51
• /
• 1999

A modified version of SST turbulence model is suggested to simulate unsteady separated flows over oscillating airfoils. The original SST model, which shows good performance in predicting various steady flows, often results in oscillatory behavior of aerodynamic loads in large separated flow regions. It is shown that this oscillatory behavior is due to the adoption of the absolute value of vorticity in generalizing the original model. As a remedy, a modification is made such that the vorticity in the original SST model is replaced by strain rate. The present model is verified for a mild separated airfoil flow at fixed angle of incidence and for unsteady flowfields about oscillating airfoils. The results are compared with BSL model and original SST model. It is illustrated that the present model gives a better agreement with the experimental results than other two models.

• 오토저널
• /
• 제14권3호
• /
• pp.80-89
• /
• 1992

An experimental study of in-cylinder of flow and combustion characteristics in two gasoline engines of different intake ports which are denoted as original port and masked shroud head (MSH) ports is presented. The flows generated by the MSH and the original port are invest- igated by laser Doppler velocimeter(LDV) under steady flow and motoring (non-firing) condit -ions. Combustion characteristics with different swirl levels produced by two intake ports are analyzed by combustion pressure measurement and statistical calculation. The swirl inside the cylinder of the MSH port engine is found to be much higher than the original port, and the MSH has a large eddy motion of cylinder diameter size. Using ensemble average method to valuate engine turbulence under motoring condition, the MSH port engine is shown to have h -igher turbulence intensity than the original port, so that the effect of the MSH port on fast burn is shown. Also the cyclic variations of peak pressure and the reaching time in the MSH port are apparently reduced.

• The Journal of the Acoustical Society of Korea
• /
• 제16권2E호
• /
• pp.27-31
• /
• 1997

This paper proposes a new rejection algorithm which distinguishes unregistered spoken words(or non-keywords) from registered vocabulary. Two kinds of garbage models are employed in this design ; the original garbage model and a new word garbage model. The original garbage model collects all non-keyword patterns where the new word garbage model collects patterns classified by recognizing each non-keyword pattern with registered vocabulary. These two types of garbage models work together to make a robust reject decision. The first stage of processing is the classification of an input pattern through the original garbage model. In the event that the first stage of processing is ambiguous, the new word dependent garbage model is used to classify thye input pattern as either a registered or non-registered word. This paper shows the efficiency of the new word dependent garbage model. A Dynamic Multisection method is used to test the performance of the algorithm. Results of this experiment show that the proposed algorithm performs at a higher level than that of the original garbage model.

• 대한한의학원전학회지
• /
• 제23권4호
• /
• pp.155-167
• /
• 2010

Two Fructus Jujubae & three Rhizoma Zingiberis Rencns are usually used in parts of prescriptions in oriental medicine. In "Dongeuibogam", those are prescribed as drugs. However, those are not exactly same with original books, which "Dongeuibogam" had quoted. In original books, those are sometimes mentioned just as 'Fructus Jujubae & Rhizoma Zingiberis' or different amount of them. Therefore, authors try to compare with "Dongeuibogam" and its original books to find out the reason of discordance. As a result, we could conclude that Two jujubes & three pieces of ginger are more commonly prescribed than original books and are fixed to use more conveniently and to give standard for doctor.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제15권2호
• /
• pp.171-174
• /
• 2007

Sericin beads were prepared from ethanol-precipitated sericin. The addition of ethanol into hot-water extracted sericin solution induced precipitation of sericin and thereby some sericin could be fractionated. The ethanol-precipitated sericin (EpSS) had narrower molecular weight distribution than original sericin. The EpSS had mainly random coil structure with small portion of ${\beta}-sheet$ structure. With the EpSS, spherical beads could be prepared at lower concentration than with original sericin due to higher viscosity. The EpSS beads had better compressive strength than the original sericin beads and had rubber-like property. Our results suggest that EpSS is more compatible in the polymeric field, since it has better mechanical strength than original sericin.

• The Journal of Advanced Prosthodontics
• /
• 제3권2호
• /
• pp.106-109
• /
• 2011

Oral cancer treatment involves the surgical removal of all or part of the maxilla, leaving the patient with a defect that compromises the integrity and function of the oral cavity. The postoperative restoration of esthetics, deglutition, and speech shortens recovery time in the hospital and expedites the patient's return to the community as a functioning member. The surgical obturator is the proven treatment option in such situations. This article describes a simple technique to fabricate a surgical obturator that restores patient's original dentition and facial and palatal tissue form. The obturator fabricated with this technique utilizes the vacuum formed index of patient's original tissue form and duplicated partly in heat and partly in auto polymerizing acrylic resin. Duplication of the original tissue form helps patient to minimize the immense physiological trauma immediately after the surgical resection. The obturator fabricated with this technique supports soft tissues after surgery and minimizes scar contracture and disfigurement, and thus may have a positive effect on the patients' psychology.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.845-846
• /
• 2008

Multi-scaled retinex algorithm is generally used to enhance the local contrast and remove the illuminant component. However, if the chromatic distribution of an original image is not uniform and dominated by a certain chromaticity, the chromaticity of resulting image depends on the dominant chromaticity of the original image, thereby inducing the color distortion. In this paper, a modified multi-scaled retinex method to reduce the influence of the dominant chromaticity in the image is proposed using a average chromaticity of original image and global illuminant chromaticity. In addition, to compensate saturation, the chroma value of the resulting image is enhanced based on that of the original image in the CIELAB space.