• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.31-39
• /
• 2012

This study aims to suggest a methodology of localizing and calibrating parameters, such as acceleration, deceleration, and lane changing which are the basis of car following model in interrupted traffic flow to overcome the limitation of origin and destination based transportation simulation and to verify the application of activity-based model for use in Korean roadway condition in a large scale area or a city. Especially, we figured out that a proper cell size reflecting Korean traffic conditions is 1.0m rather than 7.5m which is default size and a methodology of tracking vehicle behavior characteristics through tracking vehicle ID is suggested on this study. In addition, vehicle running characteristics in real interrupted traffic flow is analyzed through subdividing vehicle types and updating vehicle type ratio. For verification of suggested model, some portion of Dalgubyul-ro in the Daegu city is tested, and the possibility of realization of interrupted traffic flow in simulation is studied.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.1-17
• /
• 2021

Identifying the exact train and the type of train boarded by passengers is practically cumbersome. Previous studies identified the trains boarded by each passenger by matching the Automated Fare Collection (AFC) data and the train schedule diagram. However, this approach has been shown to be inefficient as the exact train boarded by a considerable number of passengers cannot be accurately determined. In this study, we demonstrate that the AFC data - diagram matching technique could not estimate 28% of the train type selected by passengers using the Seoul Metro line no.9. To obtain more accurate results, this paper developed a two-step method for estimating the train type boarded by passengers by applying the AFC data - diagram matching method followed by a mixture distribution analysis. As a result of the analysis, we derived reasonable express train use/non-use passenger classification points based on 298 origin-destination pairs that satisfied the verification criteria of this study.

• The Journal of shipping and logistics
• /
• v.34 no.4
• /
• pp.637-656
• /
• 2018

This res arch was conducted to identify a suitable location for an inland logistics complex in Gangwon Province, South Korea and it aims use competitive factors to derive implications from the logistics competitiveness of Gangwon Province. According to Origin-Destination analysis, the most suitable and desirable site for creating the complex was found to be in the Wonju city area. A total of 28 variable were derived through prior study in order to identify the competition factors for the inland logistics complex, As a result of exploratory factor analysis, a total of 16 subfactors were reclassified into four main factors. Analytic hierarchy process(AHP) analysis showed that 'accessibility factors' (0.374) ranked highest in terms of importance, followed by 'reliability factors' (0.358), 'operability factors' (0.166), and 'government policy factors' (0.102). In each category, delivery of goods from the inland logistics complex base to the demand site was found to be the most important factor (0.160).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.957-965
• /
• 2018

This study presents a geographic information system based dump truck route exploring system (DRES) which provides construction managers and hauling operators with efficient route information that can improve earthmoving productivity by reducing hauling time. The system is comprised of Network Analyst from Esri as a route exploring engine and a network data model. The network data model includes information on weight limit of bridges, height limit of pedestrian overpasses, and one way that impedes dump trucks' hauling efficiency. A construction manager is expected to input origin and destination point in the user interface, and the system generates an efficient route that avoids bridges with weight limit or pedestrian overpasses with height limit. The system was applied to a real earthmoving project to test its applicability, and it was found that the system functions as intended.

• The Southeast Asian review
• /
• v.20 no.2
• /
• pp.135-178
• /
• 2010

This study is to seek alternatives for regional governance related to transnational labor migration issues in Southeast Asia. This study examined the present situation and trends of labor migration in the region, reviewed involved transnational issues, and identified the current issues of governance to seek alternatives for regional governance. The increase in cross-border labor migration is no doubt a sign of growth and dynamism of the region and greater integration of their economies. But it also poses complex policy and management issues as well as transnational issues over such as unequal economic profits, illegal migration, human rights, and social security issues. In this reality, regional governance is a very important theme and the efforts to manage their migration inherently involve fundamental conflict and tension between related countries and regions. However, politics and governance of transnational migrant workers in Southeast Asia are still pursued at the national level. To resolve these issues, it is urgently required to secure not only collaboration between the parties concerned but also governance at the regional level. Findings of this study are: First, although labor migration has been a relatively long-time transnational issue, the history of addressing the issue at the regional governance is very short and still inceptive. Second, given its size, labor migration in Southeast Asia requires effective regional governance but no breakthrough was possible due to the conflict of interests between origin and destination countries and the conflict of logic between the labor market and the state. Third, the issue of labor migration is an important element for the formation of economic and socio-cultural communities the ASEAN countries have pursued. Fourth, it is urgently needed to seek alternatives for good and effective regional governance as a key to resolving these issues over migrant workers in Southeast Asia.

• The Journal of Bigdata
• /
• v.5 no.2
• /
• pp.85-95
• /
• 2020

In this study, a mobility analysis method is suggested to estimate an O/D trip demand estimation using Mobile Phone Signaling Data. Using mobile data based on mobile base station location information, a trip chain database was established for each person and daily traffic patterns were analyzed. In addition, a new algorithm was developed to determine the traffic characteristics of their mobilities. To correct the ping pong handover problem of communication data itself, the methodology was developed and the criteria for stay time was set to distinguish pass by between stay within the influence area. The big-data based method is applied to analyze the mobility pattern in inter-regional trip and intra-regional trip in both of an urban area and a rural city. When comparing it with the results with traditional methods, it seems that the new methodology has a possibility to be applied to the national survey projects in the future.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1183-1188
• /
• 2009

Estimating project costs during the early stage of conceptual planning is very important when deciding whether to approve the project and allocate an appropriate budget. However, due to greater uncertainties involved in a project, it is challenging to estimate costs during this initial stage within a reasonable tolerance. This paper attempts to develop a cost-estimate model for public road projects under these circumstances and limitations. In the conceptual planning stage of a road project, there is only limited information for cost estimation, for example, such input data as total length of the route, origin and destination, number of lanes, general geographic characteristics of the route, and other basic attributes. This implies that the model should individuate suitable but restricted information without considering detailed features such as quantity of earthwork and a detailed route of a given condition. With these limited facts, this paper applies a case-based reasoning (CBR) method to solve a new problem by deriving similar past problems, which in turn is used to estimate the cost of a given project based on best-fitted previous cases. To develop a CBR cost-estimate model, the authors classified 8 representative variables, including project type, the number of lanes, total length, road design grades, etc. Then, we developed the CBR model, primarily by using 180 actual cases of public road projects, procured over the last decade. With the CBR model, it was found that the degree of error in estimation can be reasonably reduced, to below approximately 30% compared to the final costs estimated upon the completion of detailed design.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.1
• /
• pp.21-36
• /
• 2023

Activity-based modeling systems have increasingly been developed to address the limitations of widely used traditional four-step transportation demand forecasting models. Accordingly, this paper introduces the Activity-BAsed Traveler Analyzer (ABATA) system. This system consists of multiple components, including an hourly total population estimator, activity profile constructor, hourly activity population estimator, spatial activity population estimator, and origin/destination estimator. To demonstrate the proposed system, the emission impact of land use changes in the 5-1 block Sejong smart city is evaluated as a case study. The results indicate that the land use with the scenario of work facility dispersed plan produced more emissions than the scenario of work facility centralized plan due to the longer travel distance. The proposed ABATA system is expected to provide a valuable tool for simulating the impacts of future changes in population, activity schedules, and land use on activity populations and travel demands.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.361-366
• /
• 2006

It is widely known that the dynamic optimal path algorithm, adopting real-time path finding, can be supporting an optimal route with which users are satisfied economically and accurately. However, this system has to search optimal routes frequently for updating them. The proposed concept of optimizing search area lets it reach heuristic optimal path rapidly and efficiently. Since optimal path should be increased in proportion to an distance between origin and destination, tremendous calculating time and highly efficient computers are required for searching long distance journey. In this paper, as a result of which the concepts of partial solution and representative path are suggested. It was possible to find an optimal route by decreasing a half area in comparison with the previous method. Furthermore, as the size of the searching area is uniform, comparatively low efficient computer is required for long distance trip.

• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.257-269
• /
• 2024

Purpose: The purpose of this study is to explain the pivotal role of the travel forecasting process in urban transportation planning. This study emphasizes the use of travel forecasting models to anticipate future traffic. Method: This study examines the methodology used in urban travel demand modeling within transportation planning, specifically focusing on the Urban Transportation Modeling System (UTMS). UTMS is designed to predict various aspects of urban transportation, including quantities, temporal patterns, origin-destination pairs, modal preferences, and optimal routes in metropolitan areas. By analyzing UTMS and its operational framework, this research aims to enhance an understanding of contemporary urban travel demand modeling practices and their implications for transportation planning and urban mobility management. Result: The result of this study provides a nuanced understanding of travel dynamics, emphasizing the influence of variables such as average income, household size, and vehicle ownership on travel patterns. Furthermore, the attraction model highlights specific areas of significance, elucidating the role of retail locations, non-retail areas, and other locales in shaping the observed dynamics of transportation. Conclusion: The study methodically addressed urban travel dynamics in a four-ward area, employing a comprehensive modeling approach involving trip generation, attraction, distribution, modal split, and assignment. The findings, such as the prevalence of motorbikes as the primary mode of transportation and the impact of adjusted traffic patterns on reduced travel times, offer valuable insights for urban planners and policymakers in optimizing transportation networks. These insights can inform strategic decisions to enhance efficiency and sustainability in urban mobility planning.