• 한국생산제조학회지
• /
• 제24권1호
• /
• pp.49-55
• /
• 2015

This paper reports solution-processed, high-efficiency organic light-emitting diodes (OLEDs) fabricated by a knife coating method under ambient air conditions. In addition, indium tin oxide (ITO), traditionally used as the anode, was substituted by optimizing the conductivity enhancement treatment of poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films on a polyethylene terephthalate (PET) substrate. The transmittance and sheet resistance of the optimized PEDOT:PSS anode were 83.4% and $27.8{\Omega}/sq$., respectively. The root mean square surface roughness of the PEDOT:PSS anode, measured by atomic force microscopy, was only 2.95 nm. The optimized OLED device showed a maximum current efficiency and maximum luminous density of 5.44 cd/A and $8,356cd/m^2$, respectively. As a result, the OLEDs created using the PEDOT:PSS anode possessed highly comparable characteristics to those created using ITO anodes.

• Macromolecular Research
• /
• 제11권5호
• /
• pp.352-356
• /
• 2003

The objectives of this study were to investigate the influence of gamma irradiation for sterilization on poly(D,L-lactide-co-glycolide) (PLGA) with different molecular weight and the effect of gamma irradiation on the release behavior of 1,3-bis(2-chloroethyl)-1-nitrosourea (BCNU, carmustine) from PLGA wafer with various irradiation doses. The effect of gamma irradiation on PLGA was evaluated by gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and electron paramagnetic resonance (EPR). The weight average molecular weight (M$_{w}$) and glass transition temperature (T$_{g}$) of PLGA decreased after gamma irradiation. The extent of M$_{w}$ reduction was dependent on irradiation dose and PLGA molecular weight. Using EPR spectroscopy, we successfully detected gamma irradiation induced free radicals in PLGA. The gamma irradiation increased the release rate of BCNU from PLGA wafer at applied irradiation doses except 2.5 Mrad of irradiation dose in this study.study.

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.523-527
• /
• 2012

Silicon carbide (SiC) has recently drawn an enormous amount of industrial interest due to its useful mechanical properties, such as its thermal resistance, abrasion resistance and thermal conductivity at high temperatures. In this study, RF thermal plasma (PL-35 Induction Plasma, Tekna CO., Canada) was utilized for the synthesis of high-purity SiC powder from an organic precursor (hexamethyldisilazane, vinyltrimethoxysilane). It was found that the SiC powders obtained by the RF thermal plasma treatment included free carbon and amorphous silica ($SiO_2$). The SiC powders were further purified by a thermal treatment and a HF treatment, resulting in high-purity SiC nano-powder. The particle diameter of the synthesized SiC powder was less than 30 nm. Detailed properties of the microstructure, phase composition, and free carbon content were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), a thermogravimetric (TG) analysis, according to the and Brunauer-Emmett-Teller (BET) specific surface area from N2 isotherms at 77 K.

• 동아시아식생활학회지
• /
• 제16권4호
• /
• pp.468-473
• /
• 2006

This study was conducted to develop pigment of flowers as a food material and the red rose(Rosa hybrida L.) was used for this study. To check the possibility of using the rose pigment as a food additive we have extracted the pigment from rose and examined all the factors (pH, temperature, free sugars, organic acids, metal ions) for stability. The results obtained are as follows: In examining the stability of the pigment, the residue of the pigment noticeably decreased with the increase of the pH and the temperature, and among free sugars (fructose, glucose, sucrose) the addition of fructose made the residue the lowest. With the addition of organic acids the samples exhibited the hyperchromic effect throughout the period of the storage. The pigment residue decreased when the amount of the metal ions increased and especially the Cu$^{2+}$ ion was most destructive.

• 한국식품영양학회지
• /
• 제8권3호
• /
• pp.184-191
• /
• 1995

This study was designed to investigate the changes In chemical characteristics of traditional kochujang increase in fermentation time, whereas that of total sugar decreased rather rapidly during aging of meju. Amino nitrogen content of meju Increased sharply up to 40 days of fermentation and then decreased there after On the other hand, ammoniacle nitrogen content continued to increase with increasing aging time. Initially, maltose was the most abundant free sugar, but was later replaced by glucose or fructose as the fermentation proceeded. Among non-volatile organic acids, pyroglutamic acid was present at an appreciably other organic acids did not change considerably during fermentation. The total free amino acid content Increased up to 40th day of aging and then decreased thereafter The was the most abundant amino acid followed in decreasing order by Try and Glu in meju fermented for 40 days.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.119.1-119.1
• /
• 2011

Since Gratzel et al. reported the first efficient dye-sensitized solar cells(DSSCs) in 1991, they have attracted much attention due to their relatively high power conversion efficiency and potentially low cost production. To date, high performance and good stability of DSSC based on Ru-dyes as a photosensitizer had been widely addressed in the literatures. However, the Ru-dyes are facing the problem of manufacturing costs and environmental issues. In order to obtain even cheaper photosensitizers for DSSC, the metal-free organic photosensitizers are strongly desired. The metal-free organic dyes offer superior molar extinction coefficients, low cost, and diverse molecular structures as compared to the conventional Ru-dyes, In this work, we have studied on the synthesis and characterization of the organo dendritic dyes containing different number of electron acceptor moieties in a molecule.

• 통합자연과학논문집
• /
• 제1권3호
• /
• pp.192-194
• /
• 2008

A series of non-free hydride reducing systems containing boron or aluminum atom, which possess no metal-hydride bond but an available hydrogen at a branched ${\beta}$-position, has been applied to the selective reduction (chemo--, regio-, and stereoselective reduction) of organic compounds. The systems, comprised of diisopinocampheylborane and diisobutylalane derivatives, exhibited almost perfect selectivities in the reduction of aldehydes and ketones. The characteristics features of this systems leading to a perfect transformation have been depicted in this report, especially in the 1) Reduction of ${\alpha}$,${\beta}$-Unsaturated Carbonyl Compounds to Allylic Alcohols via 1,2-Reduction, 2) Chemoselective Reduction between Structurally Different Carbonyl Compounds, and 3) Stereoselective Reduction of Cyclic Ketones.

• Fibers and Polymers
• /
• 제3권2호
• /
• pp.55-59
• /
• 2002

The thermal reaction of acetoacetanilide in the presence of aniline or phenol yielded carbanilide in quantitative yields. This reaction was applied to the synthesis of polyurea. Bisacetoacetamides were prepared from diamines and diketene in DMF. They were thermally polymerized in the presence of phenol or a diamine (6FDA) to yield polyureas of low molecular weights. The polymers were soluble in DMSO and NMP. $^1{H-NMR}$ analysis showed that they had amino group terminated structures. Poly(urea-imide) was synthesized by the reaction of an oligourea diamine with pyromellitic dianhydride in NMP. The concentration of terminal amino groups was determined by an acid-base titration. The thermal property of poly(urea-imide) was evaluated by thermogravimetric analysis (TGA). Initial decompisition took place at 332-$350^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3289-3294
• /
• 2013

An efficient method for the preparation of 8-benzylidene-4-phenyl-3,4,5,6,7,8-hexahydro-1H-quinazolin-2-ones/thiones from the reaction of aromatic aldehydes with cyclohexanone and urea or thiourea in the presence of Tetrabutylammonium hexatungstate, $[TBA]_2[W_6O_{19}]$, as an efficient, inexpensive catalyst under thermal and solvent-free conditions has been developed. Good yields, short reaction times, straightforward workup, reusability of the catalyst, and green conditions are the most obvious advantages of this procedure.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.752-754
• /
• 2009

High efficiency white organic light emitting diodes were fabricated by using an alignment free mask patterning method. Only red/green emission without any blue emission was observed in the red/green patterned region and blue emission was emitted in other area. A combination of the red/green and blue emission gave a high efficiency white emission. A maximum current efficiency of 30.7 cd/A and a current efficiency of 25.9 cd/A at 1000 cd/$m^2$ were obtained with a color coordinate of (0.38, 0.45).