• Korean Journal of Environmental Agriculture
• /
• v.17 no.2
• /
• pp.107-116
• /
• 1998

In an effort to reduce artifically the residual pesticides on crop and soil by accelerated photolysis,some 40 among the naturally occurring and synthetic coumpound were screened for photosensitization and/or photocatalysis and six promising chemicals were selected.The fungicides and the four selected photosensitizers and/or photocatalyst (PS) were applied to each crop.The results obtained are summarized as follows. 1. The wavelengths of maximum absortion (${\lambda}$max) and the molar absorptivites (${\varepsilon}$max) of procymidone,vinclozolin,and carbendazim in acentone were all 209 nm and 853,854,and 8740 respectively. 2. Of the 40 naturally-occuring and synthetic compounds screened,six promising ones were selected and designated as PS-1 (aromatic ketone),PS-2(aromatic amine)PS-3(quinone) ,PS-4 (inorganic compound),PS-5(organic acid salt) and PS-6(semiconductor photocatalyst). 3. In the accelerated photolysis of pesticide in soil by applying PS ,procymidone was decoposed rapidly by virtue of PS-2,being 59% of the control 3 days after application. 4. The vinclozolin residue in soil was reduced to 71% and 21% of the control 1 and 15 days,respectively,after PS-2 application. 5. The photolysis of carbendazim in soil was not accelerated by any of the PS tested. 6. The pesticide residues on the crop were prominently reduced by PS application.The procymidone residue on tomato was reduced to 47% of the control 15 days after PS-1 application and that on red pepper reduced to 57% 15 days after PS-2 application. 7. Vincrozolin residus remaining on tomato 1 and 15 days after PS-2 application were 38% and 56% of the control whereas those on the red pepper were 82% and 64%,respectively. 8. PS-2 was the most effective for the accelerated photolysis of carbendazim residues remaining on tomato, whereas on red pepper, the four of PS tested were all effective, but did not make much difference between them. This might be due to the shielding of sunlight by the leaves of red pepper not to exert the photosensitizing effect of PS-2 to the full.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.1
• /
• pp.32-37
• /
• 2000

Because the household garbage had high water contents, it is difficult to compost it without an additive. Therefore, this study was performed to investigate possibility of using the waste newspapers as a humidity conditioner for the household garbage composting. The maximum temperature was $66.0^{\circ}C$ in spring, $69.2^{\circ}C$ in summer, $60.9^{\circ}C$ in fall and $56.0^{\circ}C$ in winter for composting periods. The seasonal pH value reached around 8.5 after 1 week and then repeated fluctuation at the narrow range in spring and fall, while it was stabilized at the range of $8{\sim}9$ after increasing to 8.5 after 1 week in winter. The water content was reduced little in winter, while decreased significantly in the other seasons. The water content after 8 weeks was 22.2% in spring, 47.6% in summer, 25.5% in fall and 72.5% in winter. The mass was reduced rapidly during the first week of each season, but it did not show much decrease. The volume reduced after 8 weeks to 59%, 32%, 27%, and 34% in spring, summer, fall and winter respectively. Organic matter content decreased over the four seasons. Nitrogen contents were in the range of 0.7% to 2.2% during the four seasons. The contents of inorganic compounds based on dry matyter were in the range of $0.94{\sim}2.59%\;P_2O_5$, $1.23{\sim}1.87%\;CaO$, $0.37{\sim}0.46%\;MgO$, $0.55{\sim}1.98%\;K_2O$. Concentration of heavy metals(Hg, Cd, Pb, Cu, Cr, Zn, As) based on dry matter were less than the limiting value of the by-product compost.

• Korean journal of food and cookery science
• /
• v.25 no.6
• /
• pp.690-702
• /
• 2009

Liparis tessellatus(cubed snailfish), Hemitripterus villosus(shaggy sea raven), Ligularia fischeri, and Cirsiu setidens, which are staple products in Samcheok, were studied as food resources for the development of a representative local menu. Thus, their nutritional compositions were analyzed, and the resulting values were used to assess the nutritional characteristics of the newly-developed menu. In Liparis tessellatus and Hemitripterus villosus, the organic components including protein and fat tended to be lower than the corresponding values referred to as the 'Seventh Revision Food Composition Table' (2006), which was presumably linked to the spawning period of the fish. The contents of Zn, Cu, and Mg, which are nutritionally important even though the consumption of these minerals by Koreans is not sufficient, were determined to 0.5, 0.2, and 34.3 mg/100 g for Ligularia fischeri, and 26.2, 1.1, and 147.7 mg/100 g for dried Cirsiu setidens. Cirsiu setidens cultivated in Samcheok contained noticeably higher amounts of calcium, zinc, and iron, and its calcium level was more than an order of magnitude higher than that provided by the Food Composition Table. This might be associated with the fact of that Samcheok is abundant in lime which consists of calcium-containing inorganic materials. n-3 fatty acids including docosahexaenoic acid(DHA) accounted for 21% and 13% of the total fatty acids, for Liparis tessellatus and Hemitripterus villosus, respectively, and the major amino acids were glutamic acid, aspartic acid, glycine, and alanine for both fish. One of the newly developed menus, Cirsiu setidens hae-jang-gook, was nutritionally superior to the corresponding menu that used dried radish leaves, a typical ingredient in hae-jang-gook, in terms of the protein, iron, and zinc contents. Rice pottage cooked with Liparis tessellatus instead of abalone was high in protein, calcium, iron and zinc, where one serving provided 29.1, 15.4, 31.0, and 27.8% of their Reference Intake (RI)s, respectively.

• Applied Biological Chemistry
• /
• v.19 no.3
• /
• pp.172-183
• /
• 1976

RNA, DNA and other phosphorus fractions were determined in the leaf and root of soybean plants different in phosphorus sensitivity grown in $NH_4-N,\;NO_3-N$ and urea medium. The phosphorus sensitive cultivars contained higher ASIP (acid soluble inorganic phosphorus) than the tolerant cultivars with all nitrogen sources. ASIP was highest in the urea treated plants and lowest in the nitrate treated plants. Total phosphorus content was mostly affected with increase in ASIP. When ASIP increased, acid solsuble organic phosphorus(ASOP), phospholipids (L-P), RNA-P, residual phosphorus (R-P) tended to increase, while DNA-P showed little change. The percent RNA-P or DNA-P of total phosphorus in the nitrate treated plant was twice that in the ammonium treated plant, which were also higher in tolerant cultivars regardless of nitrogen sources. The percent ASOP in total acid soluble phosphorus $(ASOP/ASP{\times}100)$ decreased as phosphorus sensitivity decreased. Indications are that phosphorus sensitivity depends on the relative sizes of phosphorus metabolic pools. Total dry matter yield was negatively correlated with total phosphorus (r=0.84 significant at 0.01P), ASIP (0.84 significant at 0.01P) and residual phosphorus (0.69 significant at 0.05P). ASOP showed positive correlation with L-P, RNA-P and DNA-P but negative with R-P. RNA-P was significanly correlated only with L-P (0.63 at P=0.01). There was significant interaction (0.01) among nitrogen sources, cultivars and phosphorus metabolic pools. Phosphorus sensitivity and ammonium toxicity appear to be same in view of energy metabolism, that is, the former inhibits the conversion of ATP to ADP (energy releasing) through phosphate potential while the latter inhibits ATP formation (energy storing).

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.1
• /
• pp.52-72
• /
• 1984

This study was performed to obtain the basic data which can be applied to the use of epoxy resin mortars. The data was based on the properties of epoxy resin mortars depending upon various mixing ratios to compare those of cement mortar. The resin which was used at this experiment was Epi-Bis type epoxy resin which is extensively being used as concrete structures. In the case of epoxy resin mortar, mixing ratios of resin to fine aggregate were 1: 2, 1: 4, 1: 6, 1: 8, 1:10, 1 :12 and 1:14, but the ratio of cement to fine aggregate in cement mortar was 1 : 2.5. The results obtained are summarized as follows; 1.When the mixing ratio was 1: 6, the highest density was 2.01 g/cm$^3$, being lower than 2.13 g/cm$^3$ of that of cement mortar. 2.According to the water absorption and water permeability test, the watertightness was shown very high at the mixing ratios of 1: 2, 1: 4 and 1: 6. But then the mixing ratio was less than 1 : 6, the watertightness considerably decreased. By this result, it was regarded that optimum mixing ratio of epoxy resin mortar for watertight structures should be richer mixing ratio than 1: 6. 3.The hardening shrinkage was large as the mixing ratio became leaner, but the values were remarkably small as compared with cement mortar. And the influence of dryness and moisture was exerted little at richer mixing ratio than 1: 6, but its effect was obvious at the lean mixing ratio, 1: 8, 1:10,1:12 and 1:14. It was confirmed that the optimum mixing ratio for concrete structures which would be influenced by the repeated dryness and moisture should be rich mixing ratio higher than 1: 6. 4.The compressive, bending and splitting tensile strenghs were observed very high, even the value at the mixing ratio of 1:14 was higher than that of cement mortar. It showed that epoxy resin mortar especially was to have high strength in bending and splitting tensile strength. Also, the initial strength within 24 hours gave rise to high value. Thus it was clear that epoxy resin was rapid hardening material. The multiple regression equations of strength were computed depending on a function of mixing ratios and curing times. 5.The elastic moduli derived from the compressive stress-strain curve were slightly smaller than the value of cement mortar, and the toughness of epoxy resin mortar was larger than that of cement mortar. 6.The impact resistance was strong compared with cement mortar at all mixing ratios. Especially, bending impact strength by the square pillar specimens was higher than the impact resistance of flat specimens or cylinderic specimens. 7.The Brinell hardness was relatively larger than that of cement mortar, but it gradually decreased with the decline of mixing ratio, and Brinell hardness at mixing ratio of 1 :14 was much the same as cement mortar. 8.The abrasion rate of epoxy resin mortar at all mixing ratio, when Losangeles abation testing machine revolved 500 times, was very low. Even mixing ratio of 1 :14 was no more than 31.41%, which was less than critical abrasion rate 40% of coarse aggregate for cement concrete. Consequently, the abrasion rate of epoxy resin mortar was superior to cement mortar, and the relation between abrasion rate and Brinell hardness was highly significant as exponential curve. 9.The highest bond strength of epoxy resin mortar was 12.9 kg/cm$^2$ at the mixing ratio of 1:2. The failure of bonded flat steel specimens occurred on the part of epoxy resin mortar at the mixing ratio of 1: 2 and 1: 4, and that of bonded cement concrete specimens was fond on the part of combained concrete at the mixing ratio of 1 : 2 ,1: 4 and 1: 6. It was confirmed that the optimum mixing ratio for bonding of steel plate, and of cement concrete should be rich mixing ratio above 1 : 4 and 1 : 6 respectively. 10.The variations of color tone by heating began to take place at about 60˚C, and the ultimate change occurred at 120˚C. The compressive, bending and splitting tensile strengths increased with rising temperature up to 80˚ C, but these rapidly decreased when temperature was above 800 C. Accordingly, it was evident that the resistance temperature of epoxy resin mortar was about 80˚C which was generally considered lower than that of the other concrete materials. But it is likely that there is no problem in epoxy resin mortar when used for unnecessary materials of high temperature resistance. The multiple regression equations of strength were computed depending on a function of mixing ratios and heating temperatures. 11.The susceptibility to chemical attack of cement mortar was easily affected by inorganic and organic acid. and that of epoxy resin mortar with mixing ratio of 1: 4 was of great resistance. On the other hand, when mixing ratio was lower than 1 : 8 epoxy resin mortar had very poor resistance, especially being poor resistant to organicacid. Therefore, for the structures requiring chemical resistance optimum mixing of epoxy resin mortar should be rich mixing ratio higher than 1: 4.

• The Korean Journal of Pesticide Science
• /
• v.3 no.2
• /
• pp.47-53
• /
• 1999

Photosensitizing activities of some photosensitizers (PS) for the artificial diminution of pesticide residues on horticultural crops were investigated. Five fungicides, iprodione, bitertanol, chlorothalonil, myclobutanil, and dichlofluanid were sprayed on apple and cucumber, followed by the application of each selected photosensitizer, and the samples were collected 0, 1, 3, 7, 15 days after the photosensitizer application and analyzed for the residual amounts. Of the 40 photosensitizers tested, six selected on the basis of the eliminating effect of pesticide residues were PS-1 (aromatic ketone), PS-2 (aromatic amine), PS-3 (quinone), PS-4 (inorganic compound), PS-5 (organic acid salt), and PS-6 (semiconductor photocatalyst). The residual amount of iprodione after 15 days of the application of PS-1 was 74% of that of the control. For bitertanol, the residual amount after 15 days of the application of PS-1 accounted for 78% of that of the control. The residual amounts of chlorothalonil after 1 day of the application of PS-1 and PS-2 accounted for 56 and 54% of those of the control, respectively. The residual amounts of iprodione on cucumber after 3 days of the application of the photosensitizers PS-1 and PS-2 were 44 and 67% of those of the untreated control, respectively. For myclobutanil, the residual amount after 15 days of the application of PS-6 accounted for 45% of that of the control. In case of dichlofluanid, the residual amount after 3 days of the application of PS-1 accounted for 44% of that of the control. Based on the results, PS-1 turned out to be the most promising photosensitizer for the accelerated photodegradation of the above fungicides on apple and cucumber.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.6
• /
• pp.663-672
• /
• 2006

Background: $PM_{10}$(Particulate matter with a diameter ($<10{\mu}m$), which is characterized by different environmental conditions, is a complex mixture of organic and inorganic compounds. The Asian dust event caused by meteorological phenomena can also produce unique particulate matter in affected areas. This study investigated the cytokine produced by A549 epithelial cells exposed to particles collected during both the Asian dust pfenomenon and ambient air particles in a non-dusty period. Method: Air samples were collected using a high volume air sampler(Sibata Model HV500F) with an air flow at $500{\ell}/min$ for at least 6 hours. The cytokine messenger RNA(mRNA) was measured using a reverse transcriptase polymerase chain reaction(RT-PCR). The A549 cells were exposed to 10 to $500{\mu}g/m{\ell}$ of a suspension containing $PM_{10}$ for 24 hours. Each was compared with those in the non-exposed control cells. Result: The mRNA levels of interleukin(IL)-$1{\alpha}$, $IL-I{\beta}$, IL-8, and the granulocyte macrophage colony stimulating factor(GM-CSF) increased after veing exposed to $PM_{10}$ in the ambient air particles, compared with those in the non-exposed control cells. The increase in $IL-1{\alpha}$ and IL-8 were dose dependent at a $PM_{10}$ concentration between $100{\mu}g/m{\ell}$ and $500{\mu}g/m{\ell}$. The mRNA level of IL-8 in the A549 epithelial cells was higher during the in the Asian dust period($500{\mu}g/m{\ell}$) than during the non dust period. Conclusion: A549 cells exposed to the $PM_{10}$ collected during the Asian dust period produce more proinflammatory cytokine than during non-dusty period. This cytokine enhances the local inflammatory response in the airways and can also contribute to the systemic component of this inflammatory process.

• Solar Energy
• /
• v.11 no.3
• /
• pp.53-61
• /
• 1991

In this research, Octacosane($C_{28}H_{58}$) and Sodium Acetate Trihydrate($CH_3COONa{\cdot}3H_2O$) were selected as latent heat storage materials to store off-peak electricity or waste heat of an industrial plant. Experimental analyses were performed in terms of the variation of phase change temperature and latent heat, phase change stability for the long term utilization. The results were as follows. 1. The phase change temperatures of industrial grade Octacosane and Sodium Acetate Trihydrate were $60.7^{\circ}C$ and $57.4^{\circ}C$, the latent heat were 60.6kcal/kg and 51.1kcal/kg respectively. 2. The latent heat quantity of Octacosane was decreased with the increasing number of phase change cycles. It decreased from 60.6kcal/kg to 47.2kcal/kg upto 200 cycles and then no variation was observed after 200 cycles. 3. To prevent the supercooling of Sodium Acetate Trihydrate, the nucleating agent, Sodium Pyrophosphate Decahydrate of 3 wt% was added, and then the supercooling temperature (Tm-Tsc) was decreased from $25.7^{\circ}C$ to $1^{\circ}C$. The phase separation was disappeared by the addition of CMC-Na of 3 wt% as a thickener. It was found that the optimal quantity of nucleating agent and thickener was 4wt% considering the stability of SAT as a latent heat storage material. 4. The phase change temperature of Sodium Acetate Trihydrate($CH_3COONa{\cdot}3H_2O$) was adjusted from 57.4 to $46.2^{\circ}C$ by the addition of UREA. And then the latent heat quantity was decreased from 51.1 to 38.3kcal/kg. 5. When the heat storage capacities between the sensible and latent heat storage materials were analyzed and compared in heating process from 30 to $90^{\circ}C$, the heat storage capacity of Octacosane was 2.45 times larger than water and 12.5 times than granite at $60.7^{\circ}C$, and the heat storage capacity of Sodium Acetate Trihydrate was 2.53 times larger than water and 12.91 times than granite at $57.4^{\circ}C$.

• The Korean Journal of Pesticide Science
• /
• v.5 no.2
• /
• pp.45-50
• /
• 2001

In recent, non virus-induced mosaic symptoms(NVMS) on potato leaves were observed in the seed potato fields, and its incidence rate was $5{\sim}20%$ nationwide. It made difficult to rogue out virus-infected plants, and caused much arguments between seed potato production farmers and seed potato inspectors. The objectives of these experiments were to find out the causes of NVMS, and also to induce mosaic symptom(phytotoxicity) on potato plants by treatment of several herbicides. No significant correlations were found between incidence rates of NVMS and values from soil analyses; soil pH, soil EC, organic matter content, and contents of inorganic constituents($P_2O_5,\;NO_3$, Ca, Mg, K) in the soil around the potato planted. The examinations by ELISA, virus indicator plants, and TEM showed that NVMS on potato leaves was not caused by the viruses infection. But, the use of herbicides could induced the NVMS on potato leaves. The incidence rates of potato treated with pendimethalin linuron of 400 mL/10 a, pendimethalin of 200 mL/10 a, pendimethalin.oxadiazon of 300 mL/10 a, and control were 61.1%, 47.2%, 19.4%, and 1.4%, respectively. Based on these results, we confirmed that the treatment of pendimethalin alone and in mixture with other herbicides were the reason of NVMS on potato leaves. The yields among test plots were similar except dicamba treated plot, which decreased by about 23% compared to control plot. When their progenies harvested in 1999 were planted in the following season, no symptoms of mosaic were observed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.1
• /
• pp.27-32
• /
• 1994

These studies were Conducted to survey cultivation methods, and to analyze soil chemical properties for stable production of Aralia continentalis K., a promising medicinal crop, in the main producting districts. Aralia continentalis K. was cultivated with planting budstocks in distances of $90cm{\times}60cm$ for 3~4 years in the same field, and application rates were N 10~31 kg/10a and P, K 8~17/10a using inorganic fertilizer, that is compound fertilizer(21-17-17) for basal dressings and urea for topdressings. Most of all, the soil surveyed was coarse loamy class which was well drained and soil depth is 50~150cm in the valleys. Soil pH was low, and content of organic matters and av. $P_2O_5$ was abundant but that of exchangeable cation such as Ca, Mg, K was deficient. The relationship between growth characteristics and weight of fresh root was positive correlation in the order of No. of root, stem width, No. of node and branch, plant height and root width. On the path coefficiant analysis, the relationship between content of soil K, Ca and root yield was more apparent than other chemical properties.