• Environmental Engineering Research
• /
• v.21 no.1
• /
• pp.69-73
• /
• 2016

Generation of food waste is a serious issue that needs to be addressed worldwide. Developing suitable treatment methods while generating energy (methane) is a common practice for sustainable treatment of waste. In this study, methane generation by food waste was investigated in mesophilic and thermophilic regimes at various hydraulic retention times (HRTs) and organic loading rates (OLR). In temperature regimes, influent concentrations and HRTs ranged from 30 to 110 g COD/L and 18 to 30 days, respectively, which corresponding to an OLR of 1.0 to $6.1kg\;COD/m^3-d$. Better methane production and organic removal was observed under thermophilic conditions because of the enhanced hydrolysis of complex polymers and microbial activity at higher temperature. The peak methane productivities attained in thermophilic and mesophilic regimes were 1.30 and $0.99m^3/m^3-d$, respectively. The maximum methane yields were achieved at 50 g COD/L and HRT of 24 d in both cases, and the values were 264 and $221m^3/ton$ COD, respectively. The results of this study will facilitate the development of sustainable methane production technologies using food waste as a feedstock.

• Microbiology and Biotechnology Letters
• /
• v.41 no.1
• /
• pp.52-59
• /
• 2013

The nutritional requirements for the maximum production of lipopeptides by Bacillus subtilis N7 (B. subtilis N7) were investigated and optimized using response surface methodology (RSM) under shake flask fermentation. A one-factor-at-a-time experimental setup was used to screen carbon and nitrogen sources. A Plackett-Burman design (PBD) was employed to screen the most critical variables for lipopeptides production amongst ten nutritional elements. The central composite experimental design (CCD) was finally adopted to elucidate the composition of the fermentation medium. Statistical analyses (analysis of variance, ANOVA) of the results showed that KCl, $MnSO_4$ and $FeSO_4{\cdot}6H_2O$ were important components and that their interactions were strong. Lipopeptide production was predicted to reach 709.87 mg/L after a 60 h incubation using an optimum fermentation medium composed of glucose 7.5 g/L, peanut oil 1.25 g/L, $MgSO_4$ 0.37 g/L, $KH_2PO_4$ 0.75 g/L, monosodium glutamate 6.75 g/L, yeast extract and $NH_4Cl$ (5:3 w/w) 10 g/L, KCl 0.16 g/L, $FeSO_4{\cdot}6H_2O$ 0.24 mg/L, $MnSO_4$ 0.76 mg/L, and an initial pH of 7.0. Lipopeptide production ($706.57{\pm}3.70$ mg/L) in the optimized medium confirmed the validity of the predicted model.

• Resources Recycling
• /
• v.18 no.6
• /
• pp.10-17
• /
• 2009

Degradation of the organic component in the waste were carried out by superheated steam in a pressurized vessel. The effects of waste characteristics, reaction temperature and residence time on the degradation rate have been determined. The biodegradable organic components such as food and paper waste have been degraded, and plastics, wood and metal were remained without degradation. The degradation efficiency is decided by the desizing rate of the waste, and the waste mixture with 23% biodegradable organic component shows higher desizing rate than that of the 43% of the biodegradable organic component in a short residence time and the desizing rate is found to be 90% in the maximum condition.

• Journal of Biosystems Engineering
• /
• v.39 no.4
• /
• pp.366-376
• /
• 2014

Purpose: In the process of anaerobic digestion, stirring of the digester and feeding of organic waste into the digester have been considered important factors for digestive efficiency. The objective of this study was to determine the most appropriate conditions for both stirring interval of the digester and organic feeding frequency in order to improve anaerobic digestion performance. Methods: A 5-L anaerobic digester was used to conduct continuous batch tests to process swine manure and food waste. Four different stirring intervals of the digester were used: 5 min/h, 10 min/2 h, 15 min/3 h, and 20 min/4 h. Results: The application of swine manure to the digester every 5 min/h resulted in the highest production of biogas as well as the highest removal rates of volatile solids (VS) and total chemical oxygen demand. Stirring the digester with a mixture of swine manure and food waste at intervals of 5min/h and 10min/2 h produced the highest biogas yields of 515.3 mL/gVS and 521.1 mL/gVS, respectively. To test different supply frequencies, organic waste was added to the digester in either a 12-hor 24-h cycle. The 24-h cycle produced 1.5-fold greater biogas production than that during the 12-h cycle. Conclusions: Thus, from the above results, to optimize anaerobic digestion performance, the ideal stirring condition must be 5min/h for swine manure feeding and 10min/2h for co-digestion of food waste and swine manure in a 24-h cycle.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.1
• /
• pp.83-89
• /
• 2000

There is no simple method to solve livestock waste problems satisfactorily. For a successful solution, various methods should be well organized orderly depending upon the situation. Even in the livestock waste management, integrated waste management principle should be applied. Minimization of livestock waste generation is the first priority. It is also important to distribute fairly livestock farms throughout the nation. Efficient management of permit system is equally important. Permit should be given only when the farmer have enough grass-land on which the farmer can apply more than two thirds of livestock waste generated or when the farm have an anaerobic digestor in which store livestock waste generated for at least 3 months. In principle, livestock waste should be treated in the farm and it is desirable to operate composting facilities in the farm site too.

• KSBB Journal
• /
• v.14 no.5
• /
• pp.550-560
• /
• 1999

There have been many research efforts on biofilter modeling including Ottengraf et al. who derived a model equation for the concentration profile of pollutants(e.g., VOCs) in the biolayer and solved their outlet concentration of the waste gas stream through biofilter. However, for most of research works done so far, the effects to explain the effect of adsorption of organic particles to medium(i.e., adsorbent) have been ignored. In this work biofilter modeling accompanying process lumping has been proposed and the theoretical effect of adsorption property of the medium, on the biofilter performance of eliminating organic components in waste gas stream, is intensively discussed.

• Korean Journal of Organic Agriculture
• /
• v.13 no.3
• /
• pp.281-289
• /
• 2005

In order to find out an alternative way of analysis of food waste compost, the Near Infrared Reflectance Spectroscopy(NIRS) was used for the compost assessment because the technics has been known as non-detructive, cost-effective and rapid method. One hundred thirty six compost samples were collected from Incheon food waste compost factory at Namdong Indurial Complex. The samples were analyzed for nitrogen, organic matter (OM), ash, P, and K using Kjedahl, ignition method, and acid extraction with spectrophotometer, respectively. The samples were scanned using FOSS NIRSystem of Model 6500 scanning mono-chromator with wavelength from $400\~2,400nm$ at 2nm interval. Modified partial Least Squares(MPLS) was applied to develop the most reliable calibration model between NIR spectra and sample components such as nitrogen, ash, OM, P, and K. The regression was validated using validation set(n=30). Multiple correlation coefficient($R^2$) and standard error of prediction(SEP) for nitrogen, ash, organic matter, OM/N ratio, P and K were 0.87, 0.06, 0.72, 1.07, 0.68, 1.05, 0.89, 0.31, 0.77, 0.06, and 0.64, 0.07, respectively. The results of this experiment indicates that NIRS is reliable analytical method to assess some components of feed waste compost, also suggests that feasibility of NIRS can be Justified in case of various sample collection around the year.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.2
• /
• pp.58-65
• /
• 2001

To produce the substitute for farmland were mixed concrete waste and organic wastes. To estirnate the application of the mixture for farmland components in the solid and the leachate from the mixture were analyzed according to the ordinance of the Waste Society in Germany. Plants were cultivated in the mixture and its harvests were measured. The results showed that the mixture from waste may be used for the reclamation of landfill and landscaping according to circumstances, and the best mixture was from 85% of concrete waste, 10% of sewage sludge and 5% of paper mill sludge.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.1
• /
• pp.100-114
• /
• 2005

Organic waste, which is defined as wastes derived from various biological organisms that contain more than 40% of organic materials, is generated about 100 million tons per year in Korea. These organic wastes are now controlled by several governmental entities, under different rules and regulations, leading to the improper management and inefficient treatment. Therefore, integrated management system is primarily needed for the efficient recycling of organic waste. In this study, six kinds of organic wastes, which are food waste, sludges(sewage, waste water, night soil), animal excreta, animals and plants residues, and three kinds of recycling by-products(compost, feed, anaerobic digestion by-products) made of organic wastes, were analyzed for their physical and chemical characteristics. On the basis of this result, a possibility for the efficient recycling of organic waste was investigated.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.4
• /
• pp.11-20
• /
• 2016

Depletion of natural resources and reduction of greenhouse gas emissions are an important issue which we have to solve. The recycling of waste has emerged as a global concern. In Korea, the development of cost-effective treatment and recycling technologies also need to be improved. In this study, we compared and analyzed the cost per unit of treatment and recycling of organic waste, and presented an effective recycling scheme. We investigated the current status of treatment and costs for six types of organic wastes from 80 workplaces, including organic wastewater treatment sludge, processed organic sludge, and plant residues. In addition, environmental costs for greenhouse gas reduction were calculated. It's an economic way that organic waste is composted and used as cement additives. In particular, the economic analysis was done by realistic results of the survey target companies. In conclusion, in order for reliable processing and recycling of organic wastes, wastewater treatment sludge and sewage sludge need to be classified based on hazard characteristics. Finally, technical difficulties need to be further resolved such as odors, leachate, and debris on recycling organic wastes.