• 한국표면공학회지
• /
• 제43권1호
• /
• pp.1-6
• /
• 2010

The effect of organic additives, 1-(3-sulfoproyl)-2-vinylpyridineium hydroxide (SVH) and thiourea (TU), on the precision copper electrodeposition was investigated with optical, electrochemical and x-ray diffraction techniques. It was found that SVH played a r ole as a n accelerator and TU as an i nhibitor during the electroreduction of cupric ions in acidic Cu electroplating solution. Through electrochemical measurements, TU showed more strong interaction with cupric ions than SVH and dominated overall Cu electroplating process when both additives were present in the solution. In the case of three dimensional Cu electrodeposition on the 20 ${\mu}m$-patterned Ni substrates, SVH controlled the upright growth of Cu electrodeposits and so determined its flatness, while TU prohibited the lateral spreading of Cu in the course of pulse-reverse pulse current adaptation. With microscopic observation, we obtained the optimum organic additives composition, that is, 100 ppm SVH and 200 ppm TU during the current pulsation.

• Journal of the Optical Society of Korea
• /
• 제17권5호
• /
• pp.423-427
• /
• 2013

We present the preparation and characteristics of liquid-phase sensors based on nano-porous silicon multilayer structures for determination of organic content in gasoline. The principle of the sensor is a determination of the cavity-resonant wavelength shift caused by refractive index change of the nano-porous silicon multilayer cavity due to the interaction with liquids. We use the transfer matrix method (TMM) for the design and prediction of characteristics of microcavity sensors based on nano-porous silicon multilayer structures. The preparation process of the nano-porous silicon microcavity is based on electrochemical etching of single-crystal silicon substrates, which can exactly control the porosity and thickness of the porous silicon layers. The basic characteristics of sensors obtained by experimental measurements of the different liquids with known refractive indices are in good agreement with simulation calculations. The reversibility of liquid-phase sensors is confirmed by fast complete evaporation of organic solvents using a low vacuum pump. The nano-porous silicon microcavity sensors can be used to determine different kinds of organic fuel mixtures such as bio-fuel (E5), A92 added ethanol and methanol of different concentrations up to 15%.

• 대한전자공학회논문지SD
• /
• 제39권9호
• /
• pp.1-10
• /
• 2002

유기 발광 다이오드를 위한 indium oxide (ITO) 기판을 여러 가지로 방법으로 표면처리를 하고, 이에 따른 atomic force microscopy (AFM)에 의한 morphology의 변화와 표면에서 변화된 원소들의 조성비를 Auger electron spectroscopy (AES)분석에 의하여 조사하였다. 또한 이 기판을 사용하여 초고진공분자선 증착방법에 의하여 유기 발광다이오드를 제작하고 그 특성을 조사하였다. 그 결과 산소플라즈마으로 표면 처리한 ITO 기판 위에 제조된 organic light-emitting diode (OLED)소자의 특성이 향상되었다. 그것은 AES의 분석에 의하면 ITO 표면의 오염된 탄소가 제거되고 ITO의 일함수가 증가되어 정공이 유기물 층으로 용이하게 주입한 결과로 판단된다.

• Corrosion Science and Technology
• /
• 제7권4호
• /
• pp.212-218
• /
• 2008

Inorganic ion exchange compounds (IECs) including hydrotalcites and bentonite clays are a well known classes of layered mixed metal hydroxides or silicates that demonstrate ion exchange properties. These compounds have a range of applications from water purification to catalyst supports. The use of synthetic versions of these compounds as environmentally friendly additives to paints for storage and release of inhibitors is a new and emerging application. In this paper, the general concept of storage and release of inhibiting ions from IEC-based particulate pigments added to organic coatings is presented. The unique aspects of the IEC structure and the ion exchange phenomenon that form the basis of the storage and release characteristic are illustrated in two examples comprising an anion exchanging hydrotalcite compound and a cation exchanging bentonite compound. Examples of the levels of corrosion protection imparted by use of these types of pigments in organic coatings applied to aluminum alloy substrates is shown. How corrosion inhibition translates to corrosion protection during accelerated exposure testing by organic coatings containing these compounds is also presented.

• 한국염색가공학회지
• /
• 제19권3호
• /
• pp.12-17
• /
• 2007

In this study, we have investigated properties and behaviors of the indigo vat dyeings on synthetic fibers, namely PET and PTT/Spandex. In addition, indigo vat dyeing conditions such as dyeing temperature, dye concentration and pH were optimized. The finding results show that higher color strengths of indigo dyeings on the two types of applied fibers were obtained at $110^{\circ}C$ and $90^{\circ}C$, respectively. Furthermore, acid leuco dyeings on the fiber substrates using acetic acid and formic acid show higher dye uptake with compared to alkali leuco counterparts.

• 한국폐기물자원순환학회지
• /
• 제34권2호
• /
• pp.205-213
• /
• 2017

The current study was performed to investigate the effect of recycling coir substrates on the growth, fruit yield, and quality of strawberry plants. Analysis of physical properties revealed that the pH of a fresh coir substrate was 5.04 while those of substrates reused for one and two years were 5.20 and 5.33, respectively. The electrical conductivity (EC) of a new substrate was as high as $4.58dS{\cdot}m^{-1}$. This can cause salt stress after transplanting. The EC tended to decrease as the substrate was recycled, and the EC of a two-year recycled substrate was $1.48dS{\cdot}m^{-1}$. The fresh substrate had lower nitrogen and calcium concentrations, but higher phosphate, potassium, and sodium concentrations than the recycled coir substrate. The coir substrates recycled for one or two years maintained better chemical properties for plant growth than the fresh substrate. Strawberry growth varied depending on the number of years that the coir substrate was recycled. In general, strawberries grown in substrates that had been reused for two years did better than those grown in substrates that had been reused once or were fresh. Ninety days after transplanting, a plant grown in a substrate that had been reused for two years contained 25 leaves, which was 3.6 more than with a fresh substrate. In addition, the plants grown in a substrate that had been reused for two years exhibited larger leaf areas than those grown in other substrates. Coir substrates that had been reused for one year increased the number and area of leaves, but not as much as the substrate that had been reused for two years. One- and two-year reused coir substrates increased the weight of strawberries produced relative to the unused substrate, but the difference was not statistically significant. The plants grown in two-year reused substrates were longer and wider, as well. Also, the number of fruits per plant was higher when substrates were reused. Specifically, the number of fruits per plant was 28.7 with a two-year reused substrate, but only 22.2 with a fresh substrate. The fruit color indices (as represented by their Hunter L, a, b values) were not considerably affected by recycling of the coir substrate. The Hunter L value, which indicates the brightness of the fruit, did not change significantly when the substrate was recycled. Neither Hunter a (red) nor b (yellow) values were changed by recycling. In addition, there were no significant changes in the hardnesses, acidities, or soluble solid-acid ratios of fruits grown in recycled substrates. Thus, it is thought that recycling the coir substrate does not affect measures of fruit quality such as color, hardness, and sugar content. Overall, reuse of coir substrates from hydroponic culture as high-bed strawberry growth substrates would solve the problems of new substrate costs and the disposal of substrates that had been used once.

• Progress in Superconductivity
• /
• 제7권1호
• /
• pp.69-76
• /
• 2005

Complex single buffer composed of yttrium and samarium oxide was deposited on the metallic substrates by MOCVD (metal organic chemical vapor deposition) method using single liquid source. Two different types of the substrates with in-plane textures of about $8{\sim}10$ degree of Ni and $3at.\%W-Ni$ alloy were used. Y(tmhd: 2,2,6,6-tetramethyl-3,5-heptane dionate)$_3$:Sm(tmhd)$_3$ of liquid source was adjusted to 0.4:0.6 to minimize the lattice mismatch between the complex single buffer and the YBCO. The epitaxial growth of $(Y_{x}Sm_{1-x})_{2}O_3$ was achieved at the temperature higher than $500^{\circ}C$ in $O_2$ atmosphere. However, it was found that the formation of NiO accelerated with increasing deposition temperature. By supplying $H_{2}O$ vapor, this oxidation of the substrate could be suppressed throughout the deposition temperatures. We could get the epitaxial growth on pure Ni substrate without the formation of NiO. The competitive (222) and (400) growths were observed at the deposition temperatures of $650\~750^{\circ}C$, but the (400) growth became dominant above $800^{\circ}C$. The $(Y_{x}Sm_{1-x})_{2}O_3$-buffered metallic substrates can be used as the buffer for YBCO coated conductor.

• KSBB Journal
• /
• 제19권6호
• /
• pp.484-488
• /
• 2004

본 연구에서는 식품부산물을 원료로 사용하여 회분식 발효를 통한 Propionibacterium acidipropionici의 유기산 생산성을 검토하고 세포재순환식 연속발효를 통해 유기산의 대량생산을 위한 기초자료를 마련하고자 하였다. CSL의 함유량에 따른 회분식 발효를 실시하여 균주의 생산성이 최대가 되는 발효조건을 구하여 연속 발효공정에 적용하였다. 희석률을 $0.1{\sim}0.2\;hr^{-1}$로 변화시키며 세포재순환식 연속발효를 실시한 결과 $0.2\;hr^{-1}$에서 최대 세포량은 150 g drycell/L으로 회분식 발효에 비해 21배 증가하였으며, 유기산의 최대 생산성은 3.32 g total acids/L/h로서 13배가 향상된 것으로 나타났다. 따라서 이 발효공정을 scale-up한다면 유기산뿐만 아니라 바이오매스 자원으로서 세포량의 대량생산도 가능할 것으로 판단된다.

• 공업화학
• /
• 제28권6호
• /
• pp.626-631
• /
• 2017

투명 플라스틱 소재를 광학용으로 적용하기 위해서는 표면경도 및 내열성과 같은 물성의 개선이 필요하다. 본 연구에서는 이러한 물성의 개선을 위하여 자외선 경화형 유기/무기 하이브리드를 합성하였다. 유기소재 안에 무기 성분이 균일하게 최적상태로 분산되도록 하기 위하여 졸-겔 반응을 기초로 하여 동시에 반응이 진행되도록 하였다. 이러한 졸-겔 반응과 빠른 자외선 경화반응을 적절히 조합하여 우레탄 아크릴레이트 유기소재 안에 무기 성분의 분산성이 향상되도록 하여 투명성이 우수한 코팅층을 형성시킬 수 있었다. 자외선 경화형 유기/무기 하이브리드의 경화도와 코팅 물성을 변화시키기 위하여 다양한 종류의 알콕시 실란을 사용하였다. 이러한 자외선 경화형 유기/무기 하이브리드 코팅에서의 무기 성분의 함량에 따라 표면 경도와 내열성을 조절할 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.277-280
• /
• 2004

Thin-film photosensors on organic light emitting diode (OLED) glass substrates using active-matrix OLED TFT manufacturing processes have been constructed and optimized, and their performance has been characterized. Suitable control circuitry and applications are proposed. The photosensors may be integrated into OLED displays for detection of ambient illumination and for detection of OLED light emission, thereby enabling output, uniformity, and aging compensation.