• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.2
• /
• pp.51-58
• /
• 2016

In the Integrated Two-Phase Anaerobic Digestion (ITPAD) process, acid and methane fermentation take place in one reactor, which has advantages to cope with organic load variation and reduce foot-print required, compensating disadvantages of Conventional Separated Two-Phase Anaerobic Digestion (CSTPAD). In the present work, organic matter degradation efficiency and biogas generation amount and other performance parameters of the ITPAD fed with food waste leachate were analyzed. In addition, feasibility study on the ITPAD method was performed by comparing its digestion efficiency with that of the CSTPAD. Organic matter alteration and biogas generation of the integrated method were examined for approximately 130 days based on the 5ton/day scaled pilot plant. Experiment results revealed that organic matter removal rate was 80% for mean food waste leachate input amount of $4.1m^3/day$. The biogas generation rate was $63.0m^3$ per ton of food waste leachate input, corresponding to the input VS amount of $0.724m^3/kg-VS_{added}$, and methane content of generated biogas was approximately 61.3%. The ITPAD has a comparable or higher organic matter removal efficiency compared to the conventional separated two-phase anaerobic digestion method. Consequently, the ITPAD method has a great need to commercialize a food waste leachate treatment technology against highly concentrated organic waste leachate.

• Journal of Environmental Science International
• /
• v.18 no.3
• /
• pp.325-331
• /
• 2009

This study was aimed to behaviour of organics and nitrogen on the upflow anaerobic reactor when a acid fermenter is added. Up flow anaerobic reactor (UAR) reaction will result which operates, COD removal efficiencies of reactor with nitrate loading rate 0.11, 0.66g/L/d were over 77%, but one with 1.0g/L/d was 73.5%. Especially, on NLR 0.11g/L/d, COD removal was 77% and nitrate removal efficiency was 93% simultaneously. The other side upflow anaerobic reactor and acid fermenter (UAR+AF) reaction will result witch operates, COD removal efficiencies of reactor with nitrate loading rate 0.11, 0.66g/L/d were over 85%, but one with 1.0g/L/d was 80%. Especially, on NLR 0.11g/L/d, COD removal was 85% and nitrate removal efficiency was 98% simultaneously. Also, without in reaction condition increase of influent nitrate concentration resulted in the linear decrease of nitrate removal efficiency and nitrate removal efficiency at influent nitrate-nitrogen 800mg/L was 50%. Alkalinity was increased theoretically by denitrification at low nitrate-N concentration, however, it was not increased theoretically at high nitrate-No 40% nitrate-N of UAR was denitrified until 70% height of reactor and 90% nitrate-N of UAR+AF was denitrified until 30% height of reactor Upflow anaerobic reactor was to occur accumulate acid, which TVA/Alkalinity is 0.3$\sim$0.47. Increase of NLR resulted increase of effluent alkalinity and TVA production

• Journal of environmental and Sanitary engineering
• /
• v.24 no.2
• /
• pp.31-39
• /
• 2009

In this research, I carried out the adsorption and removal test of Pb, Ni, Co and Cu ions using organic substances spread out any where in the nature which can be obtained easily from our neighbor-such as Paulownia coreana, Pinus densiflora, Juniperus chinesis, Quercus dentata, Magnolia kobus, Platanus occidentalis, Gingko biloba, Diospyros kaki leaves. As the result of the research to find the best optional condition for the adsorption and removal, shows that the adsorption and removal ratio of Pb ion by a Paulownia coreana raw leaves is 99% at $70^{\circ}C$, those of Ni ion and Co ion by Magnolia kobus formalin treatment leaves are 79% at $70^{\circ}C$, 97% at $40^{\circ}C$ respectively. And that of Cu ion by Platanus occidentalis treatment leaves is 97% at $50^{\circ}C$ in mixed solution. As the result of comparing the removal ratio by raw leaves and formalin treatment leaves, the removal ratio of treatment is 30~90% more effective than raw leaves in most cases. And I concluded Pb > Cu > Co > Ni ion in multiple solution and Co > Ni > Cu >Pb ion in single solution after testing adsorption and removal ratio of mixed solution separately as time goes by. In general, the reactions were completed within first 5 minutes. The test result of measuring the hydrolysable tannin content of each leaf shows that an overcup Quercus dentata is 11.36%, a Diospyros kaki is 10.81% and the rest of them are 2.49~4.12% in raw leaves cases. In treatment leaves cases, an overcup Quercus dentata is 3.23% and the others are less than 1%.

• Journal of Korean Society on Water Environment
• /
• v.31 no.2
• /
• pp.94-102
• /
• 2015

Electro-coagulation experiments were conducted with aluminum (Al) or iron (Fe) electrode in order to determine the optimal electrode material and operation conditions for algae removal. Al electrode showed higher removal rate of algae than Fe electrode because Al flocs have positive surface charges which electrostatically attract algae species having negative surface charges. Removal rate of algae and total phosphorous (T-P) was increased as current density and electrode area increases. It was also found that initial pH with neutral range was optimum for T-P removal by electro-coagulation. Bench-scale continuous flow experiments consisted of electro-coagulation reactor, agitation tank and settling tank were conducted. In electro-coagulation reactor, a large fraction of Al flocs were distributed to scum layer, due to the gas bubbles generated by electrolysis reaction. In agitation tank, most of Al flocs were settled and the optimal mixing intensity was found to be 50 rpm to achieve good settleability. The removal rate of algae was about 90-95%. Additionally, the removal rate of the T-P and COD was observed to be $73.8{\pm}8.0%$ and $75.0{\pm}3.8%$, respectively. Meanwhile, the removal rate of total nitrogen (T-N) was relatively low at only 24%.

• Journal of Environmental Science International
• /
• v.27 no.11
• /
• pp.1059-1072
• /
• 2018

Bioremediation has been recognized as a suitable alternative to conventional methods of removing contaminants, and it uses fungi, bacteria and microalgae. In contrast to other organisms, microalgae are unique in that they have the ability to perform photosynthesis like plants and to utilize organic/inorganic carbon substrates, in a process called phytoremediation. Microalgae can populate a reaction site rapidly and enhance the bioremediation efficiency. In this study, Chlorella vulgaris was used to evaluate the removal potentials of the nutrients (N and P) and heavy metals (Cu and Zn) from swine wastewater. The optimum growth conditions for Chlorella vulgaris and the removal potentials of N, P, Cu, and Zn from synthetic wastewater using Chlorella vulgaris were investigated. Based on the results, the applicability of this microalga to on-site wastewater treatment was examined. Optimal growth conditions for Chlorella vulgaris were established to be $28^{\circ}C$, a pH of 7, and light and dark cycles of 14:10 h. As the concentrations of the nutrients were increased, the efficiencies of N and P removal efficiencies by Chlorella vulgaris were decreased in the single and binary mixed treatments of the nutrients, respectively. Further, the efficiencies of Cu and Zn removal also decreased as the heavy metals concentrations added were increased, both in the single and binary mixed treatments. In addition, the efficiency of Cu removal was higher than that of Zn removal. Our results indicate that Chlorella vulgaris could be used in treatment plants for the removal of nutrients and heavy metals from swine wastewater.

• Journal of Korean Society of Water and Wastewater
• /
• v.37 no.6
• /
• pp.375-382
• /
• 2023

The binary oxide adsorbent using Fe and Mn (Fe-Mn) has been prepared by precipitation method to enhance the removal of phosphate. Different amounts of chitosan, a natural organic polymer, were used during preparation of Fe-Mn as a stabilizer to protect an aggregation of Fe-Mn particles. The optimal amount of chitosan has been determined considering the separation of the Fe-Mn particles by gravity from solution and highest removal efficiency of phosphate (Fe-Mn10). The application of Fe-Mn10 increased removal efficiency at least 15% compared to bare Fe-Mn. According to the Langmuir isotherm model, the maximum uptake (q_m) and affinity coefficient (b) were calculated to be 184 and 240 mg/g, and 4.28 and 7.30 L/mg for Fe-Mn and Fe-Mn10, respectively, indicating 30% and 70% increase. The effect of pH showed that the removal efficiency of phosphate was decrease with increase of pH regardless of type of adsorbent. The enhanced removal efficiency for Fe-Mn10 was maintained in entire range of pH. In the kinetics, both adsorbents obtained 70% removal efficiency within 5 min and 90% removal efficiency was achieved at 1 h. Pseudo second order (PSO) kinetic model showed higher correlation of determination (R²), suggesting chemisorption was the primary phosphate adsorption for both Fe-Mn and Fe-Mn10.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.411-412
• /
• 2003

• KSBB Journal
• /
• v.17 no.2
• /
• pp.115-120
• /
• 2002

Biofiltration is a bioprocess treating volatile organic compounds (VOCs) in order to convert the VOCs to harmless products. This review on biofiltration is intended to provide an engineering concept such as removal efficiency, maximum load, elimination capacity and so on. Besides, modeling concept of biofilter is also supplied for designing biofilter system. Quantitative data generated in our research group is shown to explain the engineering concept as well as the modeling idea.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.10a
• /
• pp.296-296
• /
• 1998

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2000.05a
• /
• pp.43-43
• /
• 2000